What are tegular edge ceiling tiles?
The MESA Second Look tegular edge ceiling tiles use large panels that are scored to look smaller. This camouflages the grid so these fine-textured panels look like 24” x 24” ceiling tiles. Part of the Healthier Spaces Collection, CALLA Health Zone tegular ceiling tiles provide a fresh look and can be disinfected with EPA-approved cleaners.
What is the difference between tegular and non-tegular tiles?
When deciding to go for tegular or non-tegular tiles, the choice depends on appearance only. If your interest is the convenience you get from a suspended ceiling, tegular tiles won’t have any advantages over lay-in tiles. Tegular tiles provide more depth, texture, and pattern to the entire ceiling. On the other hand, lay-in tiles are plain.
What is a square edge ceiling panel?
The square edge, lay-in ceiling panels are mounted in suspension systems with either 9/16-inch or 15/16-inch profiles and provide easy access to the plenum. The grid’s appearance is less dominant with the narrower 9/16-inch profile. What does tegular mean? Square or angled tegular/ reveal ceilings defined What does tegular mean?
What are square edge acoustic ceiling tiles?
Square edge acoustic ceiling tiles are a cost-effective solution that provides easy access to the installations hidden above the ceiling. The square edge, lay-in ceiling panels are mounted in suspension systems with either 9/16-inch or 15/16-inch profiles and provide easy access to the plenum.
What is tegular edge ceiling tiles?
What are tegular ceiling tiles? Rather than being flush with the grid they're suspended in, tegular ceiling tiles hang ¼” below the metal grid. The tegular edge can be square, creating a field of protruding spaces, or the edge can be angled or beveled to create a softer look.
What is the difference between lay-in and Tegular?
Tegular tiles provide more depth, texture, and pattern to the entire ceiling. On the other hand, lay-in tiles are plain. Therefore, most people may consider the tegular pattern as more aesthetically pleasing. But since appearance is a matter of personal taste, not everyone would agree.
How do you cut tegular tiles?
Tegular tiles are made of compressed fibers. Always cut them using a knife instead of power tools. A power saw produces too much dust without making the job any more efficient.
What is a lay-in ceiling?
One type of suspended ceiling is made up of Acoustic Ceiling Tiles (ACT) and a stick-built grid system. Sometimes called a lay-in ceiling, this type of system is versatile, durable, and cost effective.
What is Tegular drop ceiling tile?
What does tegular mean? A tegular/reveal edge, whether square or angular, allows the tile to protrude below the grid ceiling system and provide more depth and texture to the ceiling plane.
What are the different types of ceiling tiles?
There are four broad types of ceiling tiles - acoustical, plastic, tin and cork. Within those categories there is a further break down of tiles by design, installation and use.
What is a shadow line on a ceiling tile?
The Shadowline Ceiling Track is an invisible artwork hanging system installed between Gypsum wallboards and ceiling panels.
What is the best tool to cut ceiling tiles?
You can use a standard utility knife, but a carpet knife cuts deeper and more cleanly. It's a good idea to wear thin gloves when working with acoustic tile to keep the tiles clean and to protect your hands from rough tile textures. A carpet knife and blade easily cuts acoustic ceiling tiles.
How do you cut shadow lines on a ceiling tile?
To do this, first lay the tile back in the ceiling grid. Then score the shadow line with a light pass with your knife. Take the tile out, use your score line and cut halfway through the tile. Cut through the side of the tile piece, meeting the halfway cut you made previously.
What is a lowered ceiling called?
Suspended Ceiling A suspended ceiling (sometimes referred to as a dropped ceiling) hangs from a metal grid below the existing ceiling that is already in place.
What is a spline ceiling?
An older, less common type of dropped ceiling is the concealed grid system, which uses a method of interlocking panels into one another and the grid with the use of small strips of metal called 'splines', thus making it difficult to remove panels to gain access above the ceiling without damaging the installation or the ...
What are the most common types of ceiling grid sizes?
The most commonly installed ceiling grid is the standard 15/16” grid commonly known as the 1” wide grid. Don't want your ceiling to look like a traditional suspended ceiling? A drop ceiling grid can also be installed using a more modern looking 9/16” wide metal grid.
How do you cut porcelain tile without chipping it?
A powerful diamond blade wet saw is needed to cut porcelain tile. Wet saws can chip porcelain tiles, so tile installers use tricks to ensure a cleaner cut. A wet saw with an adjustable blade is best, but a standard-depth saw can reduce porcelain chipping. Working slowly and with a new blade helps prevent chips.
How do you cut tile without cracking it?
Ceramic tile installation isn't a difficult task, but you may need to cut tile pieces to fit specific areas. Because of the compressed, fragile nature of tile, it can crack, break and fragment when you try to cut it. The best way to keep tile from cracking is to use a score-and-snap tile cutter or a diamond wet saw.
How do you cut already installed ceramic tile?
Turn the angle grinder so the blade will meet the tile perpendicularly. Turn on the grinder and push the blade straight down into the tile and its backing. Once you have cut through, you can pull the blade back for a short cut, or push the blade away from you to continue cutting through the tile for longer cuts.
Can I use a multi tool to cut tiles?
Can you use a multi tool to cut tiles? An oscillating multitool can replace a tile nipper (since it also works by cutting the tile edges to shape it) but cannot replace a manual tile cutter or a wet tile saw and other tile cutting tools.
What is a tegular tile?
What are tegular ceiling tiles? Rather than being flush with the grid they’re suspended in, tegular ceiling tiles hang ¼” below the metal grid. The tegular edge can be square, creating a field of protruding spaces, or the edge can be angled or beveled to create a softer look.
How much does a tegular ceiling tile cost?
Price per square foot ranges from under $1.00 per square foot up to nearly $11.00 per square foot.
Can you install a tegular ceiling grid yourself?
Whether you’re installing a tegu lar ceiling grid in a home, office, school or healthcare space, you can have it installed professionally or tackle installation yourself as a DIY project. It may seem overwhelming at first, but if you follow the steps shown in the video below and check out some additional resources, you’ll be ready to start in no time.
Do tegular tiles have decorative edges?
This opens in a new window. Since tegular tiles have a decorative edge, it’s important to pay attention to the cuts on the border panels. Make sure that your cuts are on the correct side in order to maintain the tegular edge.
What is a lowered ceiling called?
A suspended ceiling is the exact same thing as a drop ceiling, also called a dropped ceiling. These terms refer to a type of ceiling paneling that hangs below the main structural ceiling.
How thick is a suspended ceiling?
In the United States and its neighboring countries, the cell size in the suspension grids is typically either 2 by 2 feet (610 mm × 610 mm) or 2 by 4 feet ( 610 mm × 1,220 mm ), and the ceiling tiles, light fixtures, and fluorescent light tubes are the same size.
What is a GWB ceiling?
called gypsum wallboard (GWB). ▪GWB is used for flat or. slightly curved walls and ceilings.
What do you cut ceiling tiles with?
All types of ceiling tiles can be cut with basic hand tools. Acoustic tiles—the lightweight fiber panels—are cut with a carpet knife. Drywall-like drop ceiling (suspended ceiling) tiles are cut with a utility knife or a drywall saw. Tin ceiling tiles are cut with tin snips.
What is a reveal tile?
Reveal is a tile of exceptional depth of color and dimensional luster that employs the stained glass industry technique of through-color-glass. Unlike many mirrored tiles, which can appear cold and flat, Reveal has an undulating surface of ripples, folds and random inclusions and markings.
How do you clean a suspended ceiling?
Vacuum or Dust the Ceiling – This will remove any loose dust or dirt that is likely to fall off of the ceiling tiles. Use the soft brush of a vacuum or a high-quality duster. Wipe Tiles with Lint-Free Cloth – Dampen your cloth, then use it to wipe the ceiling tiles gently.
What is acoustic ceiling tiles?
Acoustic ceiling tiles lay into a suspended or dropped ceiling grid and are used alter the acoustics in the room. These tiles can be made of various acoustical materials like fiberglass, foam, wood, polyester, and other substrates. ... Acoustical control was another objective of dropped ceilings.
What is a tegular edge?
What does tegular mean? A tegular/reveal edge, whether square or angular, allows the tile to protrude below the grid ceiling system and provide more depth and texture to the ceiling plane. The tegular/reveal edge, acoustic ceiling tiles are mounted in 15/16-inch standard suspension systems and the panels are easily demountable. A narrower 9/16-inch profile minimizes the visible grid; a wide profile emphasizes it. The width and color of the suspension system further accentuate the play of light and shadow to create a distinctive appearance.
How does edge design help with suspension?
Coupled with different suspension systems, the edge design can help to hide the grid with tightly fitted panels, shadow the grid with beveled recesses, conceal the grid with panels that seem to float under it, or emphasize the grid with square or angled tegular/reveal designs.
What is a grid ceiling?
Lay-in ceiling grid ceiling systems have acoustic tiles with a square edge to provide a simple, structured expression that highlights the shape of the room.
What Are Tegular Tiles?
Tegular ceiling tiles hang a quarter inch from the ceiling grid. Usually, standard tiles have square edges. This means they require trimming before installation to make them protrude from the beam. Tegular tiles come in various types and designs. Most have a perforated surface made of compressed fiber.
What Are Lay-In Ceiling Tiles?
Lay-in ceilings are a type of suspended ceiling. They have square edges, and you don’t need to trim them before installation. The installation process is simple. You only need to lift the tile upwards and drop it on the suspended T-beam. Like the tegular tiles, lay-in tiles come in different types and designs.
Tegular Vs. Lay-in Tiles
The difference between tegular and lay-in ceiling tiles comes from the edge design.
Making Your Choice
When deciding to go for tegular or non-tegular tiles, the choice depends on appearance only. If your interest is the convenience you get from a suspended ceiling, tegular tiles won’t have any advantages over lay-in tiles.
Types of Edge Styles
Most acoustic ceiling tiles are similar except for the edge detail. It’s possible to have a tile covering all or part of the beam. The different edge styles available include:
Types of Edge Styles
Ceiling tiles come in different sizes. You can decide to go for squares like 20x 20 inches or 24x24 inches. Or you may prefer to go for rectangles, such as 24x48 inches. Your choice is also dependent on the type of beam you want to use.
In Summary
Ceiling tiles provide an opportunity to decorate your house and get acoustic benefits. Depending on your budget and taste, you can find different ceiling tiles at Decorative Ceiling Tiles. If you need assistance or have any questions, reach out to us through our contact page.
