What happens if throttle cable breaks? When the gas pedal is pressed, the cable is pulled and opens the throttle. If the cable breaks, or comes out of adjustment far enough, it can affect the drivability of the vehicle to the point where the car will not be drivable until the problem is addressed.
Full Answer
What happens if the throttle cable is too tight?
When there is excess slack or the cable is too tight, this can cause intermittent delays in throttle response relative to pressing down on the accelerator pedal. This can also result in the opposite effect as well, in that the excess slack can create a delayed throttle return response.
Why does my throttle have a delayed response?
Sometimes a cable can become stretched over time, which will not only delay the response of the throttle, but can also leave the cable more susceptible to breaking. Delayed response may also be indicative of the need to have the cable slack adjusted.
What happens if the accelerator cable breaks on a car?
If the cable breaks, or comes out of adjustment far enough, it can affect the drivability of the vehicle to the point where the car will not be drivable until the problem is addressed. Usually, there will be a few symptoms displayed when the accelerator cable is having a problem.
How to fix a broken throttle cable on a motorcycle?
If your throttle cable is broken and can’t be put back on the carb, you can use a shoelace and tie it around the throttle part of the carb. These Harley guys recommend that .
What happens if throttle cable breaks?
If the cable breaks, or comes out of adjustment far enough, it can affect the drivability of the vehicle to the point where the car will not be drivable until the problem is addressed. Usually, there will be a few symptoms displayed when the accelerator cable is having a problem.
How do I know if my throttle cable is broken?
Symptoms of a Bad or Failing Throttle Control CableImproper cable adjustment and slow acceleration response.Dirty or frayed cable.Cruise control not working properly.
How do you temporarily fix a throttle cable?
4:2410:17How To Fix A Broken Motorbike Cable Yourself With Minimum ToolsYouTubeStart of suggested clipEnd of suggested clipHowever you can simply use the larger ferrule as a copper end simply pull the end ferrule off threadMoreHowever you can simply use the larger ferrule as a copper end simply pull the end ferrule off thread the cable.
How do I know if I need a new throttle cable?
The key indicator of stretched cables is a throttle that has too much play, yet has run out of adjustment. So if you find your throttle has excessive play in it, yet you've maxed out how far you can adjust it, then it's time to replace your throttle cables.
How long does a throttle cable last?
Usually, you can expect to get five years from your accelerator cable before it needs to be replaced. Usually, your accelerator cable won't simply “let go.” You will notice one or more of the following signs: Car jerks when using cruise control. No engine response when you depress the accelerator pedal.
How much does it cost to fix a gas pedal cable?
This service typically costs between $200 and $300.
How much does it cost to replace a throttle cable?
Throttle Cable Replacement pricing for various carsCarsEstimateAverage Dealer Price2008 Dodge Durango$227$239.742008 Kia Optima$199$211.142006 Ford Taurus$198$210.822006 Acura RSX$327$339.901 more row
How do you fix a broken cable?
1:495:02How to fix a broken wire without soldering - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace the crimp connectors in the middle of the pliers as shown. So the sizes match. Press hard andMorePlace the crimp connectors in the middle of the pliers as shown. So the sizes match. Press hard and wait a few seconds. Then release the pliers. This method is a bit more complex.
Can you weld a throttle cable?
4:499:40HOW TO SOLDER Throttle & Brake Cables - YouTubeYouTubeStart of suggested clipEnd of suggested clipAfter your shirts settled. And there you go your cable is soldered at the end. So it doesn't lookMoreAfter your shirts settled. And there you go your cable is soldered at the end. So it doesn't look pretty but it's solid it'll do the trick and your cable is not going to fry anymore.
What does a throttle body cable look like?
0:013:55Drive-By-Wire or Cable Throttle? | TECH TUESDAY | - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe've got normally have an adapter on the side of the throttle body where the cable comes straightMoreWe've got normally have an adapter on the side of the throttle body where the cable comes straight from the throttle pedal. To this sort of adapter.
How do I put a new throttle cable?
2:498:08How To Replace a 4 Stroke Throttle Cable - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith the long taper facing towards the end of the cable. And then we can take the body of it. We'reMoreWith the long taper facing towards the end of the cable. And then we can take the body of it. We're going to push the throttle cable in put the body over it like so.
What causes a throttle cable to stick?
A sticky throttle could be caused by worn cables, lack of lubrication in the cables or the cable getting bound up somewhere in the mechanism. Or it can be caused by an issue with the carburetor or EFI. The cables can bind under the tank or in the handgrip.
How do you fix a stretched throttle cable?
0:062:43Stretched throttle cable fix!! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the first thing you can see is i've stretched out some of the coils in the middle of the returnMoreSo the first thing you can see is i've stretched out some of the coils in the middle of the return spring here the return spring that comes with the accu-fab.
What does a throttle body cable look like?
0:013:55Drive-By-Wire or Cable Throttle? | TECH TUESDAY | - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe've got normally have an adapter on the side of the throttle body where the cable comes straightMoreWe've got normally have an adapter on the side of the throttle body where the cable comes straight from the throttle pedal. To this sort of adapter.
Can you tighten the throttle cable?
0:262:18HOW TO ADJUST YOUR THROTTLE CABLE - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you can shift the outlet point of the cable to tighten. The cable itself and get rid of thatMoreAnd you can shift the outlet point of the cable to tighten. The cable itself and get rid of that slack you want just a small amount so that you're not stretching the cable.
Why is throttle control cable worn out?
There are several causes and symptoms of a throttle control cable that is wearing out and may need to be replaced soon. 1. Improper cable adjustment and slow acceleration response.
What is throttle control cable?
Your vehicle’s throttle control cable is a fairly basic design playing an important role in the control and operation of your car’s engine. Connected to a spring loaded linkage on the side of your engine’s throttle body on one end and connected ultimately to your accelerator pedal on the other end, this simple component can create havoc when not functioning correctly. Many of today’s modern vehicles are now designed with electronic throttle control, which in many cases will be replaced by an electronic signal that is sent to the throttle body, which directly controls the position of the throttle body valve. For purposes of this article, however, we will focus on the cable controlled design.
What happens when a cable is dirty?
Dirty or frayed cable. When the cable is dirty, many of the same effects of too much slack (noted above) can also be experienced due to the cable occasionally sticking in certain positions. When the internal wire of the cable is frayed or the individual wires are broken, this can cause an improper response or complete lack ...
Why is my throttle response delayed?
Improper cable adjustment and slow acceleration response. When there is excess slack or the cable is too tight, this can cause intermittent delays in throttle response relative to pressing down on the accelerator pedal. This can also result in the opposite effect as well, in that the excess slack can create a delayed throttle return response.
Why is my cruise control not working?
Because the cruise control functionality is operated via the same throttle control cable, you may also notice intermittent delays in cruise control working or maintaining ...
What is a cable wound like a coil?
A cable wound like a coil is a design in which the metallic strands are wound around the housing like a coil spring. This type of design is much easier to bend and route through areas requiring curves and turns, however they are more likely to bind and compress which can cause functionality problems. Cables that are structurally designed to run straight (lengthwise) down the cable. This type of design is not as prone to binding and are much less pliable.
What happens if you wear a cable on a car?
If you notice any damage or wear on the covering, then there is the possibility that the metal cable inside has received damage.
Why do accelerator cables fail?
As the throttle is what controls the power of the vehicle, any problems with the cable can quickly translate into problems with the drivability of the vehicle so it should be inspected as soon as possible. The most common way that accelerator cables fail is that they break.
What is the name of the cable that connects the gas pedal to the throttle plate?
An accelerator cable, sometimes called throttle cable, is a metal braided cable that serves as a mechanical link between the gas pedal and the engine’s throttle plate.
What is the rubber sheath on an accelerator cable?
The accelerator cable on most vehicles is covered by an outer rubber sheath that protects the braided metal cable inside. Sometimes the cable can come into contact with sharp edges or moving engine components that can wear into the sides of the covering. If you notice any damage or wear on the covering, then there is the possibility that the metal cable inside has received damage. Because the cable is under constant stress any damage to the cable can leave it more susceptible to breaking.
How to tell if accelerator cable is bad?
Usually, there will be a few symptoms displayed when the accelerator cable is having a problem. 1. Damage to the outer covering. The accelerator cable on most vehicles is covered by an outer rubber sheath that protects the braided metal cable inside. Sometimes the cable can come into contact with sharp edges or moving engine components ...
How to know if gas pedal is depressed?
When the gas pedal is depressed the engine should respond immediately and the vehicle should begin to accelerate. If when you press the pedal, there is a delayed response, or a significant amount of motion before the vehicle responds, then that may be a sign of a problem. Sometimes a cable can become stretched over time, which will not only delay the response of the throttle, but can also leave the cable more susceptible to breaking. Delayed response may also be indicative of the need to have the cable slack adjusted.
