What is the recommended height for a toilet paper holder?
The standard height for a toilet paper holder is 26 inches off the ground. In addition to this, it is also roughly eight to twelve inches in front of the rim of your toilet. In some spaces, it may be difficult to make this number work. There is often too little space in front of the toilet to put the holder this far away.
How high should the toilet paper holder be?
Toilet Paper Holder Height The recommended height for your toilet paper holder is 26″ from the floor to the center of the TP roll. It’s also recommended that the center of your toilet paper roll be placed 8-12″ in front of the front rim of your toilet.
What are ADA height requirements for paper towel holder?
To meet the criteria established by the act, paper towel dispensers should be installed a minimum of 15 inches or a maximum of 48 inches off the floor for forward-reaching range, or a minimum of 9 inches or maximum of 54 inches for those reaching from the side.
What is normal height of toilet roll holder by toilet?
Therefore the right installation height and position are very important. In general the height to install toilet paper holder around 26 inches (66cm). It is about 8″ – 12″ (20 – 30 cm) distance from the toilet.
How high should a toilet paper holder be?
The recommended height for your toilet paper holder is 26 inches from the floor to the center of the roll. You should also attempt to place this 8-12 inches from the front rim of the toilet. If you have a smaller bathroom then this may be less. There are many different shapes and sizes of toilet paper holders.
Why are toilet paper holder sizes bigger?
Typically commercial holders are larger because they can accommodate a large roll of paper. For when you are choosing a toilet paper holder at home, the size is going to be a lot smaller. Pay attention and confirm that you are purchasing rolls anywhere from 4.5 – 5 inches in both length and diameter.
Why is toilet paper important?
Rather than simply leave your toilet paper roll on top of your toilet, having a toilet paper holder creates a finished and cohesive look. It also upgrades your bathroom from a college dorm to an adult household. All bathrooms are different.
How high should a toilet dispenser be?
It should be no lower than 15 inches from the floor, but also no higher than 48 inches.
How many options are there in toilet paper holders?
When picking a toilet paper holder you essentially have 4 or 5 options to choose from in terms of material. These all have different pros and cons.
Why is it important to measure toilet paper?
Having the right measurements for your toilet paper holder is important because it will make the project go a lot smoother.
How to put toilet paper on a wall?
Usually, your toilet paper box will have a template on it. Take this and tape it to the wall using your painter’s tape. This will allow you to adjust it accordingly.
How to Install Toilet Paper Holder?
Next we will introduce you four methods of installing toilet paper holders.
How high is a toilet roll?
It is about 8″ – 12″ (20 – 30 cm) distance from the toilet. The installation height of is around 39″ (99 cm), which includes the from the top to the floor, and this could keep us reach the roller paper easily.
How to Choose the Most Suitable Paper Towel Holders?
Paper towel holder is the necessary for family. There is need for us to explain the importance in details. There are so many materials on the market. Which kind of material is the most durable?
What is the best paper towel holder?
After the electroplating treatment, the capability of excellent waterproof of brass makes it become the best paper towel holder. This function makes the paper towel holder be more sturdy and durable. At the same time, it can also give you a classical aesthetic feeling. Especially the base of the paper towel holder, which is waterproof and humid-proof. So once you choose the paper towel holders for your toilets or bathrooms, you can choose those paper towel holders which are made of brass.
What material is used for paper towel holders?
We can choose the paper towel holders according to the characteristics as well as the fabrics. The fabrics can be divided into plastic, metal and wood. The metal fabric can also be called as stainless steel, alloy , brass and etc.
How to make toilet paper out of cardboard?
First, you need some discarded cardboard boxes, then you need cut these cartons into pieces in small sizes. Then you can use glue to stick them together with hot melt glue until the height of the holder be enough to hold the ordinary toilet paper.
What are the advantages and disadvantages of a wooden towel holder?
The advantages of wooden paper towel holder are natural environmental protective and ecological; the disadvantage is that it has poor mildew resistance. And it is not suitable for us to put it in humid environment.
How high should a toilet paper holder be?
For the best ergonomics, flow and function in the bathroom, a wall-mounted toilet paper holder should be mounted so that its center is 26 inches from the floor. This height is appropriate for both standard and handicapped toilets.
How far should a toilet paper holder be from the toilet?
The distance from the front edge of the toilet to the toilet paper holder should be 8 to 12 inches. In households with taller individuals or without children, 10 to 12 inches is acceptable.
How high should a toilet paper dispenser be?
The National Kitchen and Bath Association (NKBA) recommends that toilet paper dispensers be 26 inches above the finished floor of a bathroom's toilet area, measuring from the floor to the vertical center of the dispenser. This height provides easy access from either a standard-height toilet, which is less than 17 inches tall at the seat level, or a chair-height toilet, which ranges from 17 inches to 19 inches tall. You may also see chair-height toilets referred to as "Comfort Height," which is the Kohler registered trademark for toilets of this size.
How tall is a standard toilet?
This height provides easy access from either a standard-height toilet, which is less than 17 inches tall at the seat level, or a chair-height toilet, which ranges from 17 inches to 19 inches tall.
How far should a toilet paper dispenser be from the grab bar?
Since a toilet paper dispenser is located underneath the grab bar, the ADA further specifies that the clearance between the top of a toilet paper dispenser and the bottom of the grab bar should be a minimum of 1.5 inches, which may not accommodate large rolls of toilet paper. Advertisement.
How far should a toilet bowl dispenser be from the toilet?
The NKBA recommends that the dispenser be 8 to 12 inches from the front of the toilet, measuring from the front edge of the toilet bowl to the horizontal center of the dispenser. The ADA says that the dispenser should be 7 to 9 inches in front of the toilet.
Why is a chair height toilet better?
The taller chair-height toilet is designed to make it easier for elderly people or tall people to get on and off a toilet , which is made even easier when a grab bar is securely installed to the wall beside the toilet.
Where to store toilet paper?
When a toilet paper dispenser can't be installed in the recommended location, alternative solutions for homeowners include storing rolls of toilet paper in a basket beside the toilet, on a floor-mounted toilet paper dispenser or in a cabinet above and behind the toilet.
What is the purpose of government standards in bathroom design?
Industry associations publish bathroom design standards, including heights of fixtures, to make sure that dispensers are easily accessible in typical bathrooms, and government standards are meant to ensure that dispensers are convenient for users with special needs.
Height of Toilet Paper holder
At what height from the floor should the toilet paper holder be located?
Comments (4)
There is, of course, no one-size-fits-all answer to that question, and the answer is dependent upon the height of the toilet seat (for function) and of the sink or vanity top and towel bars (for visual integration).
How high should a toilet paper holder be?
The recommended height for your toilet paper holder is 26″ from the floor to the center of the TP roll. It’s also recommended that the center of your toilet paper roll be placed 8-12″ in front of the front rim of your toilet. To find the best measurement within that 8-12″ to place it, sit on the toilet with your eyes closed and reach to where you’d expect to naturally find your TP roll (if multiple people use the bathroom, have them all do this and then mount it at the average distance). And yes, you will feel stupid while doing this – ha!
How high should a towel bar be?
The standard recommendation for towel bar height is 48″ from the floor to the center of the bar – I tend to hang mine between 44-48″ high. When determining the best towel bar height for your space, take into consideration how your bathroom is laid out (sometimes the placement of outlets and light switches can affect things) and who is going to use it (for example, you might want a lower towel bar height in a kids bathroom).
How high should a robe hook be?
Along with being used for robes, robe hooks are a great alternative to towel bars too! The recommended robe hook height in your bathroom is between 55-70″ above the floor. Mine are placed at 67″ high and about 10″ apart:
