What information is a drawing's title block identifies the project? It includes identifying information such as the project name and location, owner, architectural firm, and job number. The title block also contains the scale of the drawing and sheet number.
Full Answer
What is a title block in a drawing?
When preparing a set of drawings for planning or construction purposes, one thing that is required on every single drawing is a Title Block. This is simply a set of information that clearly identifies common information to do with the project, as well as information to do with only that particular drawing.
What information do I need to include in a title block?
Very important to have in case further information regarding the drawing is required or clarification is needed. This information at the bare minimum should be a contact name and telephone number. Most companies have there address, logo, email and website. Other Information - Sometimes other information is shown on Title Blocks.
Do I need a drawing title for my building project?
This isn't really a requirement, especially if you are drawing your own drawings, but is useful for enquiries in regard to the project and is good record keeping practice. Drawing Title - This describes the drawing and what is displayed such as Ground Floor Plan, Roof Plan, Elevations, Sections etc.
When to use a scale rule in a construction drawing?
Can be useful for scaling off the drawing using a scale rule for a rough dimension, but really should never be used in this way for obtaining information for construction purposes. All measurements used for construction should be obtained by the written dimensions on the drawings for accuracy.
What is a title block?
Where is the title block on a page?
What does it mean when the scale is out of whack?
What is project number?
How are revisions made?
What does the title block generally contain?
The title block generally contains: Revision blocks.
What information is in a materials block?
Located usually either just above the title block or in the upper left-hand corner, the Bill of Materials block (also known as a BOM, Schedule or Parts List) contains a list of all the items and quantities that are required for the project or assembly.
What is the importance of using Title Block in design drawings or plans how is it helpful to draftsmen?
The title block gives the reader of the drawing critical information about the document, including the project name, author, date of issue, topic, its place within a drawing series, etc. It gives all of the project's documents a consistent, professional look.
What do we call architectural drawings that show the size of the building?
Scale drawings demonstrate the larger objects as it is not possible to draw them in the original size. So, this means that every drawing of a building is a type of scale drawing. For instance, a location plan has a scale of 1:1000, a site plan's scale is 1:200, a floor plan, 1:100, and so on.
What is the title block use for?
A Title Block is used to name the drawing part, time and author. Essentially, it provides important information for when the document is printed.
What is used in title block of drawing sheet?
Title Block, The title block is normally placed in the bottom right of the drawing frame, and it should contain the following information: the name of the company or organization. the title of the drawing. the drawing number, which is generally a unique filing identifier.
What is the reason for the checked by box on a drawing title block?
Drawing information The draw and check boxes refer to who drew and checked the drawings. The revision box shows how many times the drawing has changed. Some architects will also maintain a revisions block to document what revisions are made each time.
What are the 5 basic components of construction drawings?
5 Types of Construction Drawings Used in Commercial Construction1 Architectural Drawings: This is one of the types of construction drawings. ... Structural Drawings: ... Electrical Drawings: ... Plumbing and Sanitary Drawings: ... Finishing Drawing:
What are the importance of the four types of drawing used in building construction?
Different types of drawings is used in construction such as architectural drawings, structural, electrical, plumbing and finishing drawings. These drawings provides layout plans and details for construction of each and every part of the building.
What are detailed drawings in construction?
Detail drawings provide a detailed description of the geometric form of a part of an object such as a building, bridge, tunnel, machine, plant, and so on. They tend to be large-scale drawings that show in detail parts that may be included in less detail on general arrangement drawings.
What should a title block architectural drawing include?
A title block is comprised of the information boxes found on the bottom right- hand corner of a drawing, which indicate drawing details such as the title, author name, scale, and date the drawing was created. This is an introductory activity designed to be completed prior to any other board drawing activities.
How do you draw a title block in technical drawing?
1:081:51Creating a Drawing Border and Title Block - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor now I measure up one inch from the bottom corner of both sides of my border. And I use my t-MoreFor now I measure up one inch from the bottom corner of both sides of my border. And I use my t-square to draw a perfectly straight horizontal line across this is going to help me make my title block.
What is the title of a drawing?
The drawing title and the drawing number are used for identification and filing purposes. Usually the number is unique to the drawing and is comprised of a code that contains information about the drawing such as the site, system, and type of drawing.
What is a title block in Microsoft Word?
0:005:15Word 2016 - Building Blocks - How to Use Quick Parts to Design a ...YouTubeStart of suggested clipEnd of suggested clipIt's surrounded by a colored border.MoreIt's surrounded by a colored border.
What is a title block?
When preparing a set of drawings for planning or construction purposes, one thing that is required on every single drawing is a Title Block. This is simply a set of information that clearly identifies common information to do with the project, as well as information to do with only that particular drawing.
Where is the title block on a page?
Title Blocks can run horizontally across the bottom of the page or vertically situated on the right side of the page. The North Point - Shows which way North is facing in relation to the building. Important for many reasons, so make sure it is on there and facing the correct direction.
What does it mean when the scale is out of whack?
What this means is that the scale is out of whack as the drawing is no longer plotted/printed at it's intended size. It is good for those looking at these drawings reduced in size to be aware that the scale is not going to be in the correct scale now the plotted/printed size is smaller. Always remember, any drawing you prepare, ...
What is project number?
Project Number - Also referred to as a Job Number. This is simply a reference number assigned to the project by the company preparing the drawings. This isn't really a requirement, especially if you are drawing your own drawings, but is useful for enquiries in regard to the project and is good record keeping practice.
How are revisions made?
Most revisions are made by letters. For instance the first revision will be marked as A then the next would be B etc. You will usually also have an area on your drawing that keeps a record of Revisions, the Date of the Revision and a basic description of what the Revision was for as in the example below: Fig.2.
What is a title block?
When preparing a set of drawings for planning or construction purposes, one thing that is required on every single drawing is a Title Block. This is simply a set of information that clearly identifies common information to do with the project, as well as information to do with only that particular drawing.
Where is the title block on a page?
Title Blocks can run horizontally across the bottom of the page or vertically situated on the right side of the page. The North Point - Shows which way North is facing in relation to the building. Important for many reasons, so make sure it is on there and facing the correct direction.
What does it mean when the scale is out of whack?
What this means is that the scale is out of whack as the drawing is no longer plotted/printed at it's intended size. It is good for those looking at these drawings reduced in size to be aware that the scale is not going to be in the correct scale now the plotted/printed size is smaller. Always remember, any drawing you prepare, ...
What is project number?
Project Number - Also referred to as a Job Number. This is simply a reference number assigned to the project by the company preparing the drawings. This isn't really a requirement, especially if you are drawing your own drawings, but is useful for enquiries in regard to the project and is good record keeping practice.
How are revisions made?
Most revisions are made by letters. For instance the first revision will be marked as A then the next would be B etc. You will usually also have an area on your drawing that keeps a record of Revisions, the Date of the Revision and a basic description of what the Revision was for as in the example below: Fig.2.