What info is on a WHMIS Supplier Label?
- 1. Product Identifier / Product Name Some essential product identification is included in every WHMIS label, and must be provided in English and French. ...
- 2. Pictograms The pictogram is what many people associate with WHMIS labels. ...
- 3. Signal Words ...
- 4. Hazard Statement & Precautionary Statement ...
- 5. Supplemental Label Information ...
- 6. Supplier Contact Information ...
What 4 items of information must be on a label?
By law, most packaged food must be labelled with:a nutrition facts table, which gives you information on: serving size. calories. nutrients. ... an ingredient list, which lists all the ingredients in a food by weight. this begins with the ingredient that weighs the most and ends with the ingredient that weighs the least.
What are 7 types of information found in a supplier label?
Supplier labels provide seven (7) pieces of information:Product Identification (brand name, code name or chemical name)WHMIS Hazard Symbols for each of product's hazard classes.Risk Phrases (words that describe the main hazards of the product)Precautionary Statements (how to work with the product safely)More items...
What must be on a WHMIS supplier label?
In general, the supplier label must include a pictogram for each WHMIS class/category that the hazardous product falls into (note that some hazard classes, such as combustible dust and simple asphyxiants, do not have pictograms).
What are the 3 types of WHMIS labels?
There are three types of WHMIS labels and their general purpose is to alert you to dangers and precautions while working with controlled products.SUPPLIER LABELS. Supplier labels come from the manufacturer of the controlled product and are usually located on the back of the container. ... WORKPLACE LABELS. ... LABORATORY LABELS.
What are the 3 pieces of information required on a workplace label?
Workplace labels do not require a border or specific wording; they do, however, require the following information: Product identifier (product name matching that on the SDS), Information for the safe handling of the product, and. A statement that the SDS is available.
What is required on a hazardous label?
OSHA has updated the requirements for labeling of hazardous chemicals under its Hazard Communication Standard (HCS). All labels are required to have pictograms, a signal word, hazard and precautionary statements, the product identifier, and supplier identification.
What is mandatory information on label?
Mandatory labelling or labeling (see spelling differences) is the requirement of consumer products to state their ingredients or components. This is done to protect people with allergies, and so that people can practice moral purchasing.
What are 5 label requirements?
5 Basic Elements that MUST be on Your Food LabelIngredients.Sugar, fat, and sodium content.Calorie counts and serving size.Freshness.Organic.GMOs.
What are the 7 sections that a product label needs to have to be in compliance with the Hazard Communication Standard?
Labels for a hazardous chemical must contain: Name, Address and Telephone Number • Product Identifier • Signal Word • Hazard Statement(s) • Precautionary Statement(s) • Pictogram(s) Page 3 3 above, the label could state, “Do not breathe vapors or spray. Get medical attention if you feel unwell.
What is #7 in the supplier SDS sections?
Handling and storageWhat information is on the SDS?SDS Section and Heading5Fire-fighting measures6Accidental release measures7Handling and storage8Exposure controls/ Personal protection12 more rows
What does a supplier label include?
The supplier label must include the following information: Product identifier – the brand name, chemical name, common name, generic name or trade name of the hazardous product. Initial supplier identifier – the name, address and telephone number of either the Canadian manufacturer or the Canadian importer*.
What are the 5 types of supplier?
Here are the main types of suppliers.Services. These include suppliers of electricity, water, telephones, IT, email, website hosting, stationery, facilities, transport, etc.Sub-contractors. If you're in a trade business, these will include other tradespeople. ... Manufacturers/producers. ... Distributors. ... Importers.
What is WHMIS in Canada?
In Canada, WHMIS legislation requires that products used in the workplace that meet the criteria to be classified as hazardous products must be labelled.
Who is responsible for WHMIS 2015?
This document discusses the WHMIS 2015 supplier requirements as regulated by the federal legislation – the Hazardous Products Act and the Hazardous Products Regulations (HPR). Health Canada is the government body responsible for the overall WHMIS supplier-related laws.
What information is required on a supplier label?
Providing a supplier label in just English or French would not be considered to be in compliance.
Who is responsible for labelling?
In most cases, suppliers are responsible for labelling the hazardous products that they provide to customers. Note: Labels should be affixed to, printed or written on, or attached to the hazardous product or the container and remain legible. Providing a WHMIS 2015 label along with the shipping papers would not be considered to be in compliance.
What is a hazard statement?
Hazard statements are brief, standardized sentences that tell you more about the exact hazard of the product. The statements are short but they describe the most significant hazards of the product.
What does a supplier label look like?
There is no set format for a supplier label. As mentioned, labels must be in English and French. They may be bilingual (as one label), or be presented as two labels (one each in English and French).
When will a supplier label have to be updated?
A label will be required to be updated when the supplier becomes aware of any "significant new data". According to the regulation, the definition of significant new data is:
Who is responsible for WHMIS?
Health Canada is the government body responsible for the overall WHMIS supplier-related laws. Note that WHMIS is also regulated in the workplace by the provinces, territories and federal (for federally regulated workplaces) governments under their occupational health and safety legislation. While these jurisdictions based their WHMIS regulations on the common model, small variations between jurisdictions may exist in how they adopted WHMIS 2015.
What does "not available" or "not applicable" mean when I see these on the SDS?
With the exception of Sections 12-15, the supplier is required to provide information on each specific information element required on the SDS. In some cases, it may be appropriate for the supplier to state “not available” or “not applicable” instead of providing the specific information.
What is an SDS?
Safety Data Sheets (SDSs) are summary documents that provide information about the hazards of a product and advice about safety precautions. SDSs are usually written by the manufacturer or supplier of the product. In some circumstances, an employer may be required to prepare an SDS (e.g., when the product is produced and used exclusively in that workplace).
When is the SDS updated?
SDSs are required to be accurate at the time of sale. An SDS will be required to be updated when the supplier becomes aware of any "significant new data". The definition of "significant new data" is:
Why is my SDS so hard to understand?
To ensure that SDS users can quickly find the information that they need, information directed toward these various users will be listed in specific sections. Having a set format will make it easier to find the information you need on every SDS.
Why are SDSs important?
SDSs provide more detailed hazard information about the product than the label. They are an important resource for workplaces and workers to help you learn more about the product (s) used. Use this information to identify the hazards of the products you use and to protect yourself from those hazards, including safe handling and emergency measures.
How often do you need to update a safety data sheet?
Note: The requirement to update a material safety data sheet every three years, as was the case under WHMIS 1988, no longer applies. For WHMIS 2015, the SDS must be accurate at the time of every sale or importation of the hazardous product. Suppliers have an ongoing responsibility to make sure SDSs and labels are accurate and compliant.
