They are called beaded liners, because they have a thick bead of vinyl at the top of the liner. This fits into a track and then the liner hangs down and into the pool. A bead receiver or track has to be added all the way around the top of the wall so the bead of the liner has something to attach to.
What is an above ground beaded liner?
Above ground beaded liners provide a clean finished look as they are not visible from the exterior of the pool. In a pool with a beaded liner you will notice a pre-existing track on the pool wall which the pool liner fits into. In most cases you do not need to remove the top rail to see this track.
What is a bead in a pool liner?
This continuous thick material (bead) is designed to feed into a channel (bead receiver) that hangs down from the top of the pool’s wall on the inside. Once the bead is secured into the channel all the way around the pool, the liner is now in place at the top.
How do you use a unibead liner?
With a UniBead liner you can use it as a J-Hook style or as a Standard Beaded liner. This is accomplished in a matter of minutes by location where the seems meet on the liner, using a utility knife to cut along the seam betweend the standard bead and the J bead.
How do I know if my beaded liner is installed correctly?
In a pool with a beaded liner you will notice a pre-existing track on the pool wall which the pool liner fits into. In most cases you do not need to remove the top rail to see this track. Once you have identified the track you should confirm that the beaded liner is inserted into the track and doesn't go over the wall.
What does beaded liner mean?
Beaded liners have a groove called the bead receiver that goes around the liner's top edge. The bead receiver is snapped into a track at the top of the pool wall and runs completely around the inside of the pool.
Are beaded liners good?
They are not generally easier to install, but in some cases they are. Most people will agree that beaded liners are much nicer looking and more expensive looking. All inground pool liners are beaded.
How does a beaded liner work?
Using a bead receiver that hangs over the top of the pool wall, the beaded liner simply snaps into the bead receiver giving you an even and consistent look. Because they install evenly around the pool wall, beaded liners form beautiful designs and patterns including wall borders and tile trims.
What is the difference between overlap and beaded pool liner?
The difference between a “beaded” style liner, and an “overlap” style liner is the way the liner is held in place at the top of the swimming pool. Beaded aboveground pool liners have a very small groove or lip at the top edge of the liner.
What is the best lining for a pool?
Vinyl-lined pools are the most popular choice because they tend to be more affordable and faster to install, which means you can start enjoying your home pool faster. Vinyl liners are custom-fit to your home's pool size and shape, and they come in a variety of colors and designs to accommodate everyone's preference.
What is most popular pool liner?
Deep blue is the most popular color for pool liners.
How do you install bead liner?
0:050:53Beaded Above Ground Pool Liner Installation (With Voiceover)YouTubeStart of suggested clipEnd of suggested clipPlace the liner in the center of the pool. And work outwards work barefoot or in socks because theMorePlace the liner in the center of the pool. And work outwards work barefoot or in socks because the treads of your shoe could rip the liner choose a hot day so the liner is stretchy.
How do you attach a beaded liner?
1:003:15How to Install a J-Hook Liner on Your Above Ground Pool - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe style of coat molding we use today was the clip in style as a little tag on the back end justMoreThe style of coat molding we use today was the clip in style as a little tag on the back end just basically slides into the bottom rail and then we also do carry the peel.
Can you replace a beaded liner with an overlap liner?
This process is a common and viable solution to change your existing above ground pool setup from a beaded pool liner to an overlap liner. Let the swimming pool pros at LinerWorld walk you through the process.
How do you replace a beaded liner in an above ground pool?
1:203:26How to Install a Standard Bead Liner on Your Above Ground PoolYouTubeStart of suggested clipEnd of suggested clipBasically we have our wall foam. Putting on wall foam where you'd use some kind of spray adhesive weMoreBasically we have our wall foam. Putting on wall foam where you'd use some kind of spray adhesive we're just gonna put in like tacking on the wall.
What are the two types of pool liners?
Vinyl liners come in three main types: Overlap, Beaded, and Unibead. The differences between the three of these is how they attach to the wall of the swimming pool.
What does a Unibead pool liner look like?
0:001:20What is a Unibead Pool Liner? | PoolSupplies.com - YouTubeYouTubeStart of suggested clipEnd of suggested clipA uni bead is a reinforced strip that is welded onto the top of your liner. It has the j-hook onMoreA uni bead is a reinforced strip that is welded onto the top of your liner. It has the j-hook on there as well as a standard bead.
What is the difference between a beaded liner and an overlap liner?
Aboveground pool liners with beaded edges feature a very little groove or lip at the top edge of the liner. An overlap type liner is folded over th...
How are beaded above-ground pool liners made?
Above-Ground Pool Liners with Beads Beaded liners have a bead at the top of the liner that snaps onto a hanging bead retainer at the pool wall's to...
How do you put a bead liner on a pool?
The beaded liner simply snaps into a bead receiver that hangs over the top of the pool wall, giving you an even and uniform aesthetic. Beaded liner...
What is a J-bead pool liner?
A J-bead liner is a sheet of vinyl that is put between the water and the pool walls in a swimming pool. Pool liners are used in both aboveground an...
What is a beaded pool liner?
Beaded pool liners are the easiest type of liner to replace. Using a bead receiver that hangs over the top of the pool wall, the beaded liner simply snaps into the bead receiver giving you an even and consistent look. Because they install evenly around the pool wall, beaded liners form beautiful designs and patterns including wall borders ...
Where should a curved seam be on a pool liner?
The curved seam should be centered on the cove at the base of the wall. The other seams will form straight lines across the bottom of the pool. Smooth out all wrinkles in the bottom. Smooth out the floor of the liner by pushing it toward the pool wall. A soft push broom will be very helpful.
Why is my pool liner not creased?
The liner should not have creases in it because it is twisting around the pool. If the liner is twisting, it is because it is not sitting properly in the pool. Make necessary adjustments before proceeding. Start filling the pool with only a few inches of water.
Do you need to remove the top ledges to install beaded liner?
Beaded liners are easier to install, as the top ledges do not need to be removed for installation. BUY NOW AT THE POOL FACTORY.
Can you put sand on top of a foam pool liner?
Adding mason sand to the cove area will help alleviate the unwanted stress on the pool wall and the liner. You can also add mason sand on top of the foam pool cove.
Why are beaded pool liners so expensive?
This is mainly because of a simple reason that the beaded pool liners look more professional compared to the overlap pool liners. Lastly, it is totally your decision for whichever pool liner you decide to use. All you need to make sure is that whichever liner you choose ...
What is the name of the liner that snaps onto the top of the pool wall?
The beaded pool liner snaps onto the top of the swimming pool wall, called the bead receivers. While on the other hand, the overlap pool liners lap right over the top of the swimming pool and is covered with a plastic coping.
What is the standard pool liner color?
Also, always remember that the pool liner which is included in most of the swimming pools is plain blue in color with a thickness of about 20-gauge. This is the most standard color and size of the swimming pools used by a number of individuals. ×.
Can you change a beaded pool liner?
The beaded pool line can be changed to an overlap pool liner. All you need to do is just add coping on the top of the pool liner and then the bead receiver. On the other hand, you can also change from an overlap pool liner to a beaded pool liner, by just adding the bead receiver to the swimming pool.
Do pool liner lines last longer?
Lastly, it is totally your decision for whichever pool liner you decide to use. All you need to make sure is that whichever liner you choose for your swimming pool, proper care and maintenance needs to be taken of the pool liner, so it could last longer.
Why use beaded pool liner?
Beaded pool liners are easy to install because they simply snap into the bead receiver, which creates an even and uniform look. One major benefit of beaded pool liners is that future liner installations will be a lot easier. With a bead receiver, pool liners can be removed and reinstalled without having to remove the top ledges.
Where is the beaded receiver on a pool liner?
Beaded liners have a groove called the bead receiver that goes around the liner’s top edge. The bead receiver is snapped into a track at the top of the pool wall and runs completely around the inside of the pool.
What is an overlap pool liner?
Overlap Pool Liners. Overlap pool liners are easy to install, and the most common and budget-friendly of these two pool liner options. After removing the top rail of your swimming pool, overlap liners are literally wrapped over the top of your swimming pool’s walls, like the name implies.
What is a beaded pool liner?
It is a liner with a thick piece of material (that is usually square or triangle shaped) all along the very top of the liner.
How to use a uni bead liner?
If using a uni-bead liner in a beaded application, you simply (but carefully) make a small cut along the top of the bead and then tear off the J-hook portion of the liner all the way around. There is an indention between the J-hook and the bead which allows you to easily and precisely tear off the J-hook.
Why is the Uni bead called Uni?
So, now I’ll tell you the same. The universal bead or “uni” bead for short is named so because it has both a J-hook AND a bead at the top of the liner. This makes it so the liner can be used in a J-hook or a beaded application. The J-hook is at the very top of the liner and the bead runs directly underneath it.
What is an expandable liner?
Any deeper than that and the pool will need what is called an expandable liner. Expandable liners have extra material that will allow for a deeper pool and they only come as overlap types. You can get a custom-sized J-hook or Beaded liner to fit a super deep pool, but that is rare and expensive.
What is an overlap liner?
An overlap type liner is exactly what it is called. The liner is placed in the pool and is designed to have some excess material at the wall. As the liner is set in place, the excess at the top is pulled over the wall and lays along the outside of the top of the pool.
How many types of pool liners are there?
Written by danknowitall in Best pool liners, Knowitall advice. When it comes to above ground pools, there are four types of liners that you can have. Some are more common than others. Some I recommend over others depending on the situation. Here’s a breakdown:
Where is excess liner on pool?
Excess of liner can be visible on the outside of the pool making it less attractive and covering some of the outside design. NOTE: The excess of overlap liners may be rolled up and hidden under the top rails on some models.
What is a beaded liner?
The most popular type of above ground beaded liner is known as the " Standard Bead or Snap Bead" which tucks / snaps into a coping that is fastened over the pool wall. The required coping is called a Bead Retainer. This liner bead is designed for customers who are building decks around their pool and will not be able to dismantle ...
What is above ground pool liner?
What is an Above Ground Overlap Pool Liner? Above ground overlap liners are pulled over the wall and rolled up on the exterior side of the pool. This style of liner will normally have a round or flat plastic coping that snaps over top of the liner to keep it in place. Above ground overlap liners are the most prevalent type and are ...
Do you need to remove the top rail of a pool liner?
In a pool with a beaded liner you will notice a pre-existing track on the pool wall which the pool liner fits into. In most cases you do not need to remove the top rail to see this track. Once you have identified the track you should confirm that the beaded liner is inserted into the track and doesn't go over the wall.
