How do OTC bearing splitters work?
OTC's Bearing Splitters feature 'knife-like' edges which are easily placed behind the part to secure a gripping surface, even when clearances are extremely limited. When used with an OTC 'Grip-O-Matic' puller, puller jaws grip attachment’s outer edge.
What does a bearing separator and Puller set include?
Featuring drop-forged construction, the bearing separator and puller set comes with two of the most widely used 2 in. and 3 in. bearing splitters, along with pulling components to safely remove bearings. The set also includes a bar-type puller head with a 9/16 in.
Is this a good starting point for a bearing splitter?
All in all, this tool is a good starting point, but plan on buying extra 5/8-18 nuts, and buying a few sets of high strength 5/8-18" threaded rods in different lengths, from a reputable supplier. Bearing splitter consists of 2 halves, 2 threaded rods and 4 nuts.
What is LLG bearing splitter and how does it work?
LLG Bearing Splitter are commonly used in metallurgical industry, tool spindles, gears, automobiles, rolling mills, mining, transmissions, plastic machinery, home appliances, reducers, motors, pumps, machinery, and other automotive applications. LLG follow the ISO standard.
How do you separate bearings?
Dry all the bearings by rolling them about on a clean piece of kitchen towel. Next roll all of the ball bearings to one side. Then pull the inner up in the opposite side of the balls and it should click out.
What tool is used to remove bearings?
PullersA bearing puller is a tool which is used to remove components such as bearings, gears and pulleys from a shaft or a recess. The puller securely grips the component with specially designed jaws before driving it off the shaft. Pullers are used in every industry for safely and effectively dismounting bearings.
How do bearing pullers work?
A bearing puller is used to remove bearings, gears, or pulleys from shafts. A typical bearing puller has a forcing screw that is positioned on the end of the shaft and legs that circle around the back of the bearing.
How do you install a wheel bearing without a press?
12:3118:21PRESS IN Wheel Bearings- LIKE A PRO WITHOUT A PRESS! - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou kind of wiggle it snug it up. And it pretty much goes straight once we pull it in all the way itMoreYou kind of wiggle it snug it up. And it pretty much goes straight once we pull it in all the way it will be straight it'll spin true all right spacers in bolts in seals in bearings in here we.
How do you use a bearing splitter?
0:461:50How To Use A Bearing Separator - YouTubeYouTubeStart of suggested clipEnd of suggested clipSelect two of the same length poor legs from the kit. Use the shortest legs possible to clear theMoreSelect two of the same length poor legs from the kit. Use the shortest legs possible to clear the shaft. Thread. One end of the leg into the poor locate. The yoke over the other ends. And tighten.
How do you get a bearing out without a puller?
0:441:56How to Remove Blind Bearings Without a Bearing Puller ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you feel that bread compressed just pack more bread in and continue that until the bearing. IsMoreOnce you feel that bread compressed just pack more bread in and continue that until the bearing. Is removed and there you go blind bearing removed without a puller.
How much does it cost to have a bearing pressed?
Pressed-On Unit While the cost of the bearing drastically diminishes (usually these run between $25.00-50.00) the labor involved to replace the bearing goes up, usually to the tune of 2-4 hours to replace ($160-400.00).
What are the three types of pullers?
-If you're pulling something off a shaft, you can use a jaw-type, push-puller, slide hammer or bearing puller with attachment. -If your job includes pulling something out of a hole, look for internal pulling attachments coupled with a slide hammer or a push-puller.
How many types of bearing pullers are there?
There is a two-claw type and three-claw type for the bearing puller, but the three-claw type is stronger and more convenient for removing large bearings.
How do you make a homemade wheel bearing press?
0:152:09DIY Bearing Press - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you put take your bolt. Put your washers on. It. Then you save your other washers and your otherMoreSo you put take your bolt. Put your washers on. It. Then you save your other washers and your other nut. You put the bolt through the thing that you're working on. But bearing in it.
Can you replace a wheel bearing without replacing the hub?
Your mechanic is correct in that the only repair for the bearing is to replace the hub. It is a sealed unit and cannot be disassembled without destroying it.
What can I use to press wheel bearings?
10:1317:31How To "Press" A "Press In" Style Wheel Bearing - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe're gonna need to get a adapter I just use a little press box out of the hub tamer kit we'll getMoreWe're gonna need to get a adapter I just use a little press box out of the hub tamer kit we'll get one that fits the outer bearing so we're pushing on the outer race.
How many types of bearing pullers are there?
There is a two-claw type and three-claw type for the bearing puller, but the three-claw type is stronger and more convenient for removing large bearings.
What size bearing puller do I need?
One rule of thumb in choosing a puller is the center bolt diameter must be at least ½ the diameter of the shaft from which the object is being removed. It is impossible to predict the exact force needed for every pulling situation. The amount of press fit and force of removal can vary greatly between jobs.
What can be used to remove and/or install bearings?
It is important to use the proper sleeve and impact ring size and ensure the bearing does not become cocked while being seated. An arbor press is a safe method for removal and installation.
What is a blind bearing puller?
Blind Bearing Puller Set. For pulling jobs requiring an internal pull, such as pilot bearings. Set includes four collets which fit a wide range of applications. Select the appropriate sized collet by comparing it with the application. Insert the collet, expand it to fit the hole, then attach the slide hammer assembly.
LLG Bearing Splitter
LLG is a professional manufacturer and exporter of bearing separators with a history of more than ten years. LLG produces various bearing separators of different sizes to meet customer requirements, and advanced machines provide the highest quality service.
LLG Bearing Splitter Series
Featuring: 48UV15 Bearing Splitter is helpful to remove the bearing from the axle, replace the steering pump, etc. The pulley puller kit helps to remove compressed power steering and alternator pulleys.
Why LLG Bearing Splitter
The function of the LLG Bearing Splitter goes far beyond the bearing. They can be used to pull power steering and alternator pulleys, bushings, flywheels, and of course bearings that cannot be used by ordinary three-jaw pullers.
LLG Bearing Splitters
LLG bearing splitter are designed to withstand compound loads, mainly radial loads. Bearing splitters are used to manage axial and radial loads on reciprocating shafts and housings.
What is a 2" and 4" bearing separator?
2" and 4" bearing separators cover most automotive applications. Can be used separately or in combination with other pullers or attachments to remove axle bearings, gears and other press-fit components. View Details
What is the length of a bar puller?
Bar puller. May be used separately or in combination with other pullers or tools. Length: 160mm. View Details
Can a puller be used separately?
Puller. May be used separately or in combination with other pullers or tools. View Details
