What is the bumperbully?
The BumperBully is the ultimate rear bumper protection on the market. Made of top quality materials with optional safety and security features, it offers a universal fit and license plate cut out guide for vehicles with license plates located in their rear bumper.
How do I use the bumper bully?
It also comes standard with steel reinforced trunk straps and red safety reflectors, but its patented stabilizer bars are in a platinum color. To use any of these products, you simply open your trunk and flip the Bumper Bully out to protect your rear bumper when parked. The bumper guard is not designed to be used while driving.
Will the bumper bully (bumper protector) fit my vehicle?
The Bumper Bully is not a structural component and will not contribute to a vehicle’s crashworthiness or occupant safety during rear end collisions. (4) Will the bumper bully (bumper protector) fit my vehicle? Are there exceptions? The product will fit most vehicles. Exceptions are rear engine vehicles.
Why choose our car bumper guard?
As an added benefit, our bumper guard integrates dual reflectors for safer night time parking. The best feature of our car bumper guard is its unique shape and design. As a car enthusiast our rear bumper protector was crafted to complement the graceful lines of high end European cars.
How does bumper Bully work?
The Bumper Bully trunk straps have 2”x4” of soft foam rubber pads on back of the straps. The pads provide a cushioned surface and raise the straps off the bumper. By raising the straps, the soft touch straps pads create an additional protective layer for your vehicle's bumper.
Can you drive with bumper bully?
(1) Can I drive with the Bumper Bully attached? No, never drive or operate a vehicle with the Bumper Bully attached. Doing so is dangerous and may result in damage to the vehicle or product. Always return the product to vehicle's trunk prior to driving.
Are bumper bullies worth it?
Overall, it's simple to clean, looks fine on the back of your car, and is a good value for the price. One issue is the Bumper Bully may cover your license plate, so you might have to cut out a section provided on the product to accommodate it in order to avoid a ticket.
What is the purpose of a bumper Badger?
BumperBadger is a temporary rear bumper guard that's meant for parked vehicles only (NOT INTENDED FOR DRIVING USE). After you park simply flip the BumperBadger out of the trunk so that it covers the rear bumper. Before driving or operating the vehicle flip the product back inside the trunk and store flat.
Is a bumper guard worth it?
Clearly, rear bumper protection is an important concern for anyone who parks on the street. Lets face it more than half of all rear bumper damage occurs when you park your car. Without rear bumper protection your car bumper will be scarred when another vehicle bumps your car during parking.
How do I protect my front bumper from scraping?
0:0911:42SLIPLO - Car Bumper Scrape Guard! Installation & Review! - YouTubeYouTubeStart of suggested clipEnd of suggested clipLower front bumper. It's quick and easy to install with no modifications drilling or damage to yourMoreLower front bumper. It's quick and easy to install with no modifications drilling or damage to your car it's durable effective and compared to fixing a scrape bumper.
How do bumpers work?
When a car hits something at a low speed, the bumper will press backward to use the crumple zone to soften the impact as the foam and fenders absorb the energy. The crumpling of the bumper, fender, and foam limits the amount of damage that can happen to the car and the people inside of it.
What is bumper protection?
To prevent damages that may not be covered by car insurance, many people use bumper guards to protect their vehicles. Bumper guards are vertical bars or foam pads that can be placed on either the back or front of your car.
How do you reinforce a car bumper?
2:4616:22DIY Bumper Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipBelow the surface. Then we're going to be better off when we go to put our epoxy. On once more getMoreBelow the surface. Then we're going to be better off when we go to put our epoxy. On once more get our cold. Water. And apply it to both sides.
How do you remove a Tesla rear bumper 3?
2:217:58How to Remove Your Model 3 Bumper - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo take your ratchet. And uh we're going to take out this clip here behind the tail. Light on bothMoreSo take your ratchet. And uh we're going to take out this clip here behind the tail. Light on both sides.
Where to store bumper bully?
To keep the Bumper Bully looking its best, store it flat in your trunk when not in use. Do not store folded as the rubber may crease.
Can you use bumper roller outside a car wash?
Never enter a car wash with the BumperBully outside your vehicle. Doing so, may result in damage to your vehicle and product. If the car wash attendant washes the product for you, make sure they place the BumperBully inside the trunk before passing vehicle into the car wash.
Can you drive with bumper bullies?
No, never drive or operate a vehicle with the Bumper Bully attached. Doing so is dangerous and may result in damage to the vehicle or product. Always return the product to vehicle’s trunk prior to driving.
Can you use bumper bullies outside?
Yes, the bumper bully is designed for outdoor parking. It may also be used in indoor and valet parking garages.
Is bumper bully structural?
The product helps minimize the risk of scratches and the results of low impact parking maneuvers. The Bumper Bully is not a structural component and will not contribute to a vehicle’s crashworthiness or occupant safety during rear end collisions.
What is bumper bully made of?
The Bumper Bully is made of an all weather rubber material that stays flexible in even the coldest weather. Our all weather rubber can be used rain or shine and will not crack, break, or tear. It is soft to the touch and has an elastic quality, helping it absorb the shock of an impact.
What are the straps on a bully bumper?
The Bumper Bully trunk straps have 2”x4” of soft foam rubber pads on back of the straps. The pads provide a cushioned surface and raise the straps off the bumper. By raising the straps, the soft touch straps pads create an additional protective layer for your vehicle’s bumper.
What is the impact pad on bumperbully?
The BumperBully Platinum Edition (only) comes with an added layer of impact protection, soft foam rubber impact cushions in strategic locations on the back of the product. The impact pads provide an added 10mm thick cushioned surface on the back of the product, best able to absorb impact from minor parking bumps. Note: 10mm thick impact pads are standard on the Platinum Edition ONLY.
What are the raised ribs on a bumper?
The raised ribs on the BumperBully are engineered to cushion minor parking bumps, incorporating raised areas that run linear to the surface , providing strategic impact zones. These areas were designed to flex and compress during parking bumps to absorb some of the impact energy.
What is stabilizer bar?
Integrally formed into the product, the stabilizer bars lend structural stability to the bumper guard and provide a secure anchor point for the straps. The structural rigidity provided by the stabilizer bars ensures the product will stay flat on the bumper, preventing flop overs and sagging corners.
Step 1
NOTE: * If Velcro does not adhere to the vehicle’s carpet, you can use the additional two velcro stickers provided. See Below.
Step 3
Before driving, be sure to place product inside the trunk (do not drive with product attached).
Optional Velctro Tabs
Attach optional Velcro stickers to a clean smooth hard metal or plastic surface under the trunk carpet or another accessible area; the straps ends can then attach to the additional Velcro stickers. Note: additional Velcro stickers should never be attached directly to the trunk carpeting.
Care Instructions
Both the BumperBully and the rear bumper should be washed regularly, even if you use just use water and a car soft wash brush to clean the surface. A super soft car wash brush will enable you to clean the bumper guard quickly and easily.
How to use bumper bully?
To use any of these products, you simply open your trunk and flip the Bumper Bully out to protect your rear bumper when parked. The bumper guard is not designed to be used while driving.
What is a bumper guard?
Designed to protect the bumper from substantial damage, a bumper guard may not be the best-looking part you can add to a car, but it looks a lot better than a bumper maimed by scratches and dents.
What is the T-Rex bumper protector?
It’s a similarly designed product made of high density durable and all-weather foam material , which is 0.25-inches thick. It measures 72-inches wide and can curve around corners, offering good coverage on most vehicles. It secures in place using two velcro straps, with the bumper security attaching directly to the carpet of your trunk.
How tall is bumperbagger?
The company offers a few different models with the most expensive being the “HD Edition.” Measuring 46-inches wide and 12-inches tall , the BumperBadger HD Edition features linear raised ribbing that protrudes from the front surface, providing a flexible impact zone to cushion minor parking bumps. The guard also has top stabilizer bars to keep it flat and stable on the bumper for maximum protection. Lastly, the triple-stitched trunk straps are plenty strong to anchor the BumperBadger inside the trunk.
How far does a BumpShox XL go between the license plate holes?
It does use the standard distance in the U.S. of 7 inches between the license mounting holes, so you will want to check to make sure your vehicle has the same distance before ordering. It’s worth mentioning the BumpShox XL only works with the front bumper, not the rear.
Where are corner bumper guards made?
But they’re not as unsightly and it’s something you can just install once to provide protection all the time. The guards are manufactured in Europe from a durable and flexible impact absorbing material, that is also lightweight. They’re weatherproof and UV resistant, so they’ll hold up in adverse weather conditions.
How thick is a BumpShox XL?
Measuring 14-inches wide and 8.5-inches tall, the license plate frame is 2.25-inches thick and is manufactured from V-Tech All Weather Foam.
