What is the normal counter depth?
What is normal counter-depth? While the standard kitchen countertop depth is 25 ½ inches, most kitchen island countertops can go up to 27 or 28 inches deep and over 30 inches deep if it comes with a breakfast bar. The island countertop depth depends on the availability of space.
What is the average kitchen counter depth?
The typical kitchen countertop is 24 to 25 inches deep, depending upon the manufacturer or the shape of the countertop piece. Some countertops with an integrated back splash and rolled front edge may be a little larger, such as 25 1/2 inches deep, when measured from wall to front edge.
What are the dimensions of counter depth?
Standard Bathroom Counter Depth
- Cabinet Depth. Bathroom cabinets are shallower than kitchen ones to match the reduced dimensions of a bathroom. ...
- Countertop Depth. Standard bathroom countertops are between 19 ½ to 22 ½ inches deep. ...
- Overhang Depth. Like kitchen counters, bathroom counters have a standard 1 ½-inch overhang. ...
What is the average depth of a bar counter?
What is standard bar depth? The dimensions of a typical bar are fairly standard. A finished bar height surface that works well for the average height person is 42 inches. The bar top should be at least 18 inches deep. 20 to 24 inches is better if you have the room. What is the standard depth of a kitchen bar?
Why are ranges not counter-depth?
Slide-in ranges are made to fit snugly, so there is no space between the counter. This also requires a strip of the counter at the back of the range that allows it to slide-in to place. This extra bit of counter explains why a slide-in range's depth must be less than a freestanding model.
What depth is counter-depth?
24–25 inchesWhat does counter-depth mean? “Counter-depth” is the distance between your kitchen wall or backsplash and the front of your countertops, which is typically 24–25 inches. A counter-depth appliance is designed to match the depth of countertops, so that the front of the appliance aligns with the edge of the countertop.
What is standard depth range?
The most “standard” range size is about 30 inches wide, 27–29 inches deep and 36 inches tall. Keep in mind these measurements do not include the backguard, handles, knobs or grates. The second most “standard” stove size is 36 inches wide, so consider this if you want an extra burner or element.
How do you measure the depth of a range?
To measure depth_,_ measure from the back of the stove to the front of the oven door. Don't include knobs or handles in this measurement if you're simply checking whether the oven will line up with the depth of the counter and cabinets.
How far is too far for a refrigerator to stick out?
Do Fridges Need Space Around Them? In short, the answer is yes. Your fridge will need about two inches of space away from the wall in the back to allow for air circulation. On the sides, you'll want your fridge to have about 1/8 inch for a standard fridge and about 1 inch on each side for cabinet depth.
Why are counter depth refrigerators more expensive?
Manufacturers make fewer counter-depth products compared to standard depth fridges which affects unit-level cost. In addition, manufacturers often use more costly, but thinner insulation material to provide as much interior space as possible; also contributing to their higher cost.
How do you fill gaps between countertops and ranges?
Use a silicone material if there is any height difference between your stovetop and the counter. Silicone is more flexible and will fit the form better. Use stainless steel gap covers to match a metal stove-top seamlessly.
What is the difference between standard depth and counter-depth?
The biggest difference between counter-depth refrigerators and standard-depth refrigerators is the depth of the refrigerator. Counter-depth refrigerators are generally shallower and standard-depth refrigerators are generally deeper.
How much space do you lose with a counter depth refrigerator?
Counter depth styling gives you an extra 5″ of kitchen space, while fitting virtually flush with your current counters and other kitchen fixtures.
Will a 30 inch stove fit in a 30 inch opening?
30 inch stove won't go through 30inch opening.
Does the depth of a range include the handle?
The standard stove size from KitchenAid is typically 30 inches wide, 36 inches tall, and roughly 25 to 27 inches deep, excluding handles, knobs, and control panels.
Are 30 inch stoves exactly 30 inches?
Most standard stoves are 30 inches wide, around 25–27 inches deep (excluding handles and knobs) and 36 inches tall (excluding control panels). These standard stove sizes are designed to fit standard cabinet cutouts that are 34-1/4 inches wide, 24 inches deep and 36 inches tall.
What is the normal kitchen counter depth?
25 ½ inchesCountertop depth standard measure is 25 ½ inches, though this varies based on appliance depths, room size, base cabinet size, and the backsplash details. Having a standard depth countertop helps maximize your space and enhances the look of your kitchen. Cabinet depth standard measure is 24 inches.
What is the difference between standard depth and counter depth?
The biggest difference between counter-depth refrigerators and standard-depth refrigerators is the depth of the refrigerator. Counter-depth refrigerators are generally shallower and standard-depth refrigerators are generally deeper.
What is the standard depth of a kitchen cabinet?
Standard wall cabinets are generally 24 inches in depth.
What is the standard size for a kitchen countertop?
Countertop Width Standards Most homes are fitted with kitchen countertops that measure 25.5 inches in width (from the wall to the edge of the counter), with some measuring up to 28 inches. Standard measurements allow for a 1.5-inch overhang over 24-inch deep base cabinets.
How deep is a counter depth?
Typically you’ll find the depth between 24–25 inches, but variations occur.
What is counter depth refrigerator?
Best of all, like standard refrigerators, counter-depth refrigerators come in all styles: French door, side-by-side, top-freezer, and bottom-freezer. 2. Improved Kitchen Workflow: Because your appliances, especially your refrigerator, generally extend only an inch or two beyond the edge of the countertop, you will experience a better flow ...
How far to measure for ventilation?
Measure from the floor to the bottom of any cabinets or countertops that will be above the appliance. It is best to allow for half an inch from your measurement for the sake of ventilation.
Why do counter depth units run wider?
Width Measurement: Remember, counter-depth units typically run wider in order to compensate for their narrower depth, so be sure your unit can fit into the allowed space.
Do counter depth appliances require the same wiring?
While counter-depth appliances require the same installation and similar wiring and plumbing hookups, proper measuring is paramount. (Tip: double-check that your doorways are wide enough to accommodate.)
What is the depth of a Thermador range?
Thrill your inner chef with our 24-inch standard depth Pro Harmony ® Ranges. Whether your goal is to cook a simple salmon recipe for two or a French Mediterranean meal for twelve, Thermador provides you with amazing versatility in our 30, 36 and 48 inch dual fuel and gas range ovens. With our 24-inch ranges you get back boasting cutting-edge innovation and unparalleled performance, our multiple, powerful 18,000 BTU Star ® burners and massive 4.5 cubic foot oven cavity make cooking large meals a breeze.
How many fans does a Thermador oven need?
Thermador convection technology is so powerful that only one fan is needed to keep the temperature consistent throughout the oven cavity.
What is counter depth?
A "counter-depth" or "cabinet-depth" appliance is one designed so that the appliance is roughly the same front-to-back depth as the countertops and base cabinets. Refrigerators are the appliances where this is most relevant, since these are appliances that most often jut out from the countertops and base cabinets. Most other appliances—such as wine coolers, dishwashers, and compact freezers—are already designed to fit under the countertop.
What does shallower counter depth mean?
This can mean a reduction in countertop space, as well as a wider door that requires a larger swing radius. And this special design may cost more than a standard appliance.
How deep should a cabinet be?
While the standard depth for base cabinets is 24 inches, this can vary somewhat, especially if the cabinets are custom built. Even a standard cabinet may be set forward slightly from the wall, so that the effective depth is 30 inches or so. In addition, the overhang of the countertops can vary.
Why are counter depth appliances shallow?
The shallower profile of counter-depth appliances can improve traffic flow in a kitchen, since there is no jutting appliance to get in your way as you move about during cooking chores. But the doors on these appliances are often wider, which means you will deal with a wider door swing as you open and shut them.
How much more is a counter depth refrigerator than a refrigerator?
Counter-depth appliances typically cost about 15 to 20 percent more than standard refrigerators that have comparable features, and it is not uncommon for the appliance to be slightly smaller in capacity.
How deep is a counter depth refrigerator?
A counter-depth refrigerator may have a depth as little as 28 7/8 inches, or as much as 31 1/4 inches, all of which will extend slightly forward from standard cabinets and countertops. Also make sure you understand how the appliance manufacturer measures the depth of the appliance. This measurement sometimes runs from the back ...
How deep is a refrigerator?
Because standard base cabinets/countertops are usually 24 to 25 inches deep, and standard refrigerators are between 30 and 34 inches deep, the refrigerator may extend out as much as 5 to 10 inches beyond the plane of the cabinet faces. This can make for a clumsy-looking room design, and can even interrupt traffic flow.
How deep is a counter depth?
The term counter-depth, though widely used amongst retailers, can be misleading because the actual measurement can vary somewhat from the standard counter depth of 25 inches.
What is counter depth refrigerator?
A counter-depth refrigerator is a full-size model with or without a freezer compartment. This style of a refrigerator has become quite popular but there are pros and cons to consider before shopping for one.
What happens when a refrigerator is standard depth?
When a refrigerator is standard depth, it will be deeper than neighboring counter and cabinets, sometimes protruding into the main traffic area and that can create a bottleneck of sorts in that kitchen space.
Why do people choose a counter depth refrigerator?
Many will choose a counter-depth refrigerator simply because this style gives the kitchen a more uniform profile. The refrigerator does not protrude several inches past the counter. More convenient access to contents. Finding and retrieving contents from a counter-depth refrigerator is much easier. It requires less extended bending.
How deep is a refrigerator?
When it comes to compact, under-counter refrigerators, coolers and freezers, these are usually referred to as cabinet-depth and though these can vary from the standard, most will be 24 inches so that they will be flush with the cabinetry once installed, much the same as a built-in dishwasher. And since most freestanding wine coolers are ...
Is a 25 inch refrigerator wider than a standard refrigerator?
A wider profile. For a given capacity, a 25-inch counter-depth refrigerator will be wider than a standard-depth model. If you're replacing an existing standard-depth fridge with a counter-depth model, you may need to look at a reduced capacity to fit within the existing space.
Is counter depth included in the model title?
And read full appliance specs, the term counter-depth may not be included in the model title. At one time, market availability of counter-depth refrigerators was limited, but this popular model is now much easier to find.
What is the right balance of cooking, counter and storage space?
The right balance of cooking, counter and storage space is essential to a smooth functioning kitchen. And the stove is where most of the action happens. You’ll need to choose between different range types, widths and element or burner configurations in order to come home with the right fit. Use this guide to learn about standard stove dimensions ...
How deep should a cabinet be?
A typical wall cabinet is 24 inches deep to work with standard range depths of around 25 to 27 inches. This means your range will stick out slightly beyond your cabinets, which is typical. Most of this extra depth will be the closed door.
What are the different sizes of stoves?
Stove widths run from 20–24 inches for compact, 30–36 inches for standard and 48–60 inches for extra-wide models. Depths stay around 25–27 inches and heights around 36–41 inches, with some compact models making up for width with height.
How are stoves measured?
Stoves are measured in several different ways. Look for these in shopping specifications:
How to measure for a cutout for kitchen cabinets?
Use a measuring tape to measure the width of the cutout from cabinet to cabinet. If your countertops extend past the cabinets into the cutout, measure that width as well since it could affect installation. Take a measurement near the back of the cabinets and the front to make sure they match. If not, go with the smaller dimension. A standard cutout width is usually 30 inches wide to accommodate a 30-inch range that is actually 29-7/8 inches wide.
How to measure for a stove cutout?
Use a measuring tape to measure the height of the cutout from the floor to the top of countertops. Take one measurement toward the back of the opening and one toward the front to account for an unlevel floor. If you find that it is unlevel, most ranges have adjustable legs to level the range. A typical cutout height is 36 inches to align with a standard stove height.
How do stoves fit?
The goal is for your range to fit mostly flush with the top of your countertops and the front of your cabinets, with the door only sticking out an inch or two beyond cabinets.
What is counter depth refrigerator?
Refrigerators marketed as "counter-depth" are typically side-by-side models that are slightly shallower than standard refrigerators. They maintain ample interior space by also being slightly wider or taller than standard models.
How deep is a kitchen countertop?
Kitchen countertops can have subtle differences in depth. Base cabinets are typically 24 inches deep, but sometimes they are set slightly forward from the wall to make room for backsplash treatments. And the countertop overhang may add as much as 2 inches on some decorative treatments. It is not uncommon for the front edge of a countertop to extend as much as 28 to 30 inches from the back wall. If the cabinetry or countertop has been custom-made, the overall depth can be less or more.
How far does a countertop extend?
It is not uncommon for the front edge of a countertop to extend as much as 28 to 30 inches from the back wall. If the cabinetry or countertop has been custom-made, the overall depth can be less or more. So-called counter-depth refrigerators rarely match the countertops exactly.
How tall is a countertop refrigerator?
This often means a wider, taller appliance. These refrigerators can be as much as 72 inches tall, which may interfere with the placement of wall cabinets above the appliance.
How deep is a refrigerator?
Standard refrigerators are typically 32 to 36 inches deep or more, and since countertops are normally about 25 inches deep (24 inches for the base cabinet with a 1-inch overhang) this means that a standard refrigerator will stick out from adjoining countertops by 6 inches or more.
How many cubic feet are counter depth refrigerators?
Pay close attention to capacity. Counter-depth fridges range in capacity from 15 cubic feet to 25 cubic feet. This capacity is what tells you the food-storage capability of the appliance. You may think you are getting a nice, space-saving counter-depth fridge but pay for it dearly by losing total storage capacity. While extra width and height can compensate for the loss in capacity, most counter-depth refrigerators are slightly smaller in capacity than comparable standard models.
How big is a box with doors?
30 1/8 inches: Box with doors, plus roughly a 1-inch space in back, and about 2 5/8 inches for handles.
How deep is a DCS range?
Just measured, my 48' DCS range is 28" deep (including handles). Counters are at 26" and they swooped the granite out to meet up with the edge of the range.
Why do I need a deep range?
Either the deeper range provides needed depth for multiple big pots or fits better in extra deep countertops needed for additional cooking space. Or it's a style choice so that the range area can be bumped out. Many kitchens with pro-style ranges will showcase the range as a design feature and bumping it out from the rest of the cabinetry would certainly make it more of a focal point. Do any of these fit your needs? I wish I had the floor space to necessitate such decisions.
How deep is Wolf's commercial depth?
Thank you for responding - sorry for not being clear, what I mean by commercial depth is, Wolf offers two "versions" of their 48" range. One that is 24 " deep, and one that is 28" (or around there) deep, which they call "commercial depth"... just their terminology for different models of the Wolf range I'm considering, which would impact my layout a little I guess.
Does Viking have a commercial depth?
Viking used to have a commercial depth too , I don't know if they still do, when I bought my previous range (Viking) I was space constrained and definitely wanted a 24" deep range to be flush with the countertop and surrounding cabinetry, so a deeper range wouldn't have worked for me anyway.
Why It Is Important to Figure Out Dimensions beforehand?
- Having a good understanding of countertop dimensions is critical to ensuring that your space works for you For example, if you have a small kitchen, you may want to consider using narrower countertops to save space. Alternatively, if you entertain often, you may want to invest in wider countertops to give you more prep space when cooking for large groups. Ultimately, knowing th…
What Is The Standard Counter-Depth?
- When it comes to choosing a countertop, depth is an important consideration. The depth of the countertop will impact the amount of available workspace, as well as how easily you can access items stored in cabinets and appliances. For instance, shallower counters are a good choice for small kitchens, as they can help to maximize the available space. Conversely, deeper counters …
Why You Should Go For Deeper Countertops?
- Anyone who has ever cooked a big meal knows that counter space is important. After all, there’s only so much you can do when you’re cramped up in a small area. That’s why many people choose to have deeper countertops installed in their kitchens. While it’s true that deeper countertops can have vast amounts of wasted space, they also offer a number of benefits. 1. First, deeper counte…
Final Thoughts
- In general, a standard counter depth is around 25.5 inches. This should give you a good starting point when measuring for your own counters. Have any questions about finding the right counter depth for your home? Let us know in the comments!