How to Close a Crimp Bead
- Closing a Crimp Bead. Crimp beads are most often used when stringing a beaded piece (like a bracelet or necklace) which has been strung with beading wire.
- About Crimping Pliers. ...
- Closed Crimping Pliers. ...
- Add Crimp Bead to Beading Wire. ...
- Curl the Crimp Bead. ...
- Round the Crimp Bead. ...
- Finish Securing Crimp Bead. ...
- Crimp Bead Tips. ...
Which type and size of beading crimp to use?
Selecting Beading Wire
- Decide on several strands. ...
- Decide which diameter fits through your bead holes. ...
- Consider whether pound test strength is an important factor in your project. ...
- Bead stringing wire is mostly meant to be secured using crimp beads or tubes. ...
How to choose the correct beading crimp type and size?
- Coil Ends are inexpensive and easy to use. ...
- Center-Crimp Cord Ends work nearly the same way. ...
- Glue-On Cord Ends are best for materials like rubber and rattail (that are too soft to crimp), and for braided or larger cord like bolo cord and 6mm round suede ...
How to use a bead crimping tool?
https://beadaholique.com - One of the easiest ways to finish beading wire ends is to use crimp beads with loops on their ends. These pre-attached loops make ...
What crimp tool do I Need?
- IWISS PEX CINCH Crimping Tool Crimper for Stainless Steel Clamps.
- SharkBite 23251 PEX Crimping Tool for PEX Pipe.
- SharkBite U701 PEX Tubing Cutter.
- Conbraco Crimp Tool Pex Multi Size.
- IWISS® F1807 PEX Pipe Crimping Tool Kit for 3/8",1/2",3/4",1" Copper Ring with Free Gauge.
Why do you need crimp beads?
Crimp beads help secure a loop on a piece of jewelry so that the finished piece can be attached to other components of jewelry. If you're making your own beaded jewelry, you'll probably need to crimp the wire on both ends to make sure the beads don't fall off.
How do you use crimp beads on a cord?
2:203:59All About Crimp Beads And How To Use Them - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut a tool in that loop and tug and make sure it's nice and secure and once it's nice and secure.MorePut a tool in that loop and tug and make sure it's nice and secure and once it's nice and secure. You can use wire cutters to cut that wire end off very close to the crimp.
Do you need to use a crimp bead cover?
0:172:27How to Use a Crimp Bead Cover - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd it's great but if you want to have a really professional. Clean look what you'll want to do isMoreAnd it's great but if you want to have a really professional. Clean look what you'll want to do is take a crimp bead cover. And cover up that crimp bead.
What is the difference between crimp tubes and crimp beads?
Many jewelry designers prefer crimp tubes over crimp beads. The tubes tend to be stronger than crimp beads and less likely to crack and break. Tubes may do a better job of gripping beading wire because they tend to have a larger interior surface area.
Why won't my crimp beads hold?
This is either a result of using a diameter of wire that is too small or stringing your beads too tightly. First, check to make sure that you're using the largest diameter of wire that will pass comfortably through the beads.
Can you use crimp beads on thread?
Can crimp beads be used with thread? A. The metal edges of a crimp bead can cut or fray thread when crimping so it is not recommended to use crimps when designing with thread. Instead, use knots with bead tips or French wire for a professional finish to your designs.
What can I use instead of crimp beads?
An alternative to crimp beads and crimp tubes is a newer finding called Screw-Tite Crimps™. Screw-Tite Crimps not only secure your Accu-Flex® beading wire to your clasp, they also allow you to change your clasp for a different one, should you want a different look.
Can you use crimp beads as spacers?
Crimps can be used as spacers and more. But the most common use is finishing the design. Crimping is a huge part of the jewelry making industry. You must master your crimps in order to create a design that is sturdy and will not break.
How do I choose a crimp bead?
0:162:36How to Choose the Right Size Beadalon Crimp Beads and Tubes ...YouTubeStart of suggested clipEnd of suggested clipSo for example you can see here there's a number one and a number two and this symbol is going to beMoreSo for example you can see here there's a number one and a number two and this symbol is going to be your crimp bead. And this symbol is going to be your crimp tube.
How do you use crimp beads without a crimp tool?
0:573:39How to use a crimp bead and cover without the crimping tool. - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd give it a squeeze. Just like that. It's not gonna come off it's staying in place. Okay and thenMoreAnd give it a squeeze. Just like that. It's not gonna come off it's staying in place. Okay and then you would use a crimp cover to go over that but that is what a crimp bead looks like and the crimp.
Can you use crimp beads on elastic?
Never use crimp beads with elastic. Some people try this, but it never lasts long because metal cuts elastic, and there's no changing that. A correctly tied knot will last better in the long run.
Why do you need to crimp beads?
Crimp beads help secure a loop on a piece of jewelry so that the finished piece can be attached to other components of jewelry. If you’re making your own beaded jewelry, you’ll probably need to crimp the wire on both ends to make sure the beads don’t fall off.
How to make a bead with crimp?
1. Gather your supplies. First, determine what size wire you have. Use an online chart to make sure you have the right size crimp beads for your wire. Take into consideration how many strands of wire or thread you will be crimping at once, as this will increase the size of bead you’ll need.
How to make a bead necklace?
Thread your first bead onto the wire. Thread the extra tail of wire through the bead hole. Use your flush cutters to cut off the loose end of the cord as close as possible to the bead. Thread the rest of your beads according to your design until you reach the other end.
How to make a c shape on a bracelet?
Move the crimp bead close to the end of the clasp. Next, use crimping pliers to flatten the bead in the middle to form a " c" shape and round out the shape . Thread the rest of your beads onto the wire according to your design until you reach the other end.
How to tighten crimp bead?
When you are ready to attach your final clasp to the end of your piece, thread the crimp bead and clasp just like before, but now you will want to tighten all of your beads by pulling on the tail end of the loose wire. This will snug all your beads up together, leaving no gaps in your design.
How to flatten a bead?
Flatten the bead. Use crimping pliers to flatten the bead. Squeeze the beads with the flatter back channel of the crimping pliers that is closest to the handle . Gently but firmly squeeze the pliers closed. This will both flatten and place a dent in the middle of the crimp bead so that it resembles the letter “C”.
How to crimp a clasp?
Slide the crimp bead down the wire. Move the crimp bead close to the end of the clasp or end piece. Check the crimp bead and make sure it is not too close to the clasp or end piece. You want to have a small loop around the clasp or end piece, but not so small that it holds the clasp so tightly that it cannot move freely.
What is a crimp bead?
Crimp beads are soft metal beads used in place of knots to secure clasps and beads onto un-knottable stringing material such as beading wir e. To use crimps, you will need some flat nose pliers to squash the crimps, or speciality crimping pliers that "fold" the bead into a small volume. First, thread crimp onto wire.
How to make a jump ring with a wire?
First, thread crimp onto wire. Loop the wire around your clasp or jump ring (the thing you want to put on the very end of the wire). Pass the end of the wire back through the crimp, so that the loop of wire is closed.
What is a crimp bead?
Crimp Beads: Crimp beads are shaped like a hollow round bead and come in a variety of sizes and metals. To secure them to jewelry wire, flatten the crimp bead with a pair of flat or chain nose pliers. The flattened bead grips the jewelry wire. The image below shows what a crimp bead looks like when it is finished and crimped to wire.
What is a crimp for jewelry?
Crimps are designed to work with Jewelry Wire. If you are working with jewelry wire, it is more than likely you will work with crimps. These durable little findings will provide your designs with security and add professional finishing touches. Best of all, they are easy to use!
What is a crimped and folded tube?
The crimped and folded tube grips the jewelry wire. The image below shows what a crimp tube looks like when crimped to jewelry wire. The same rules apply here as well; if done properly, the crimp tube will be very secure. Over-squeezing can cause breakage of the crimp tube itself or the jewelry wire.
How to secure a crimp to a wire?
To secure them to the jewelry wire, crimp the wire with a crimping tool. The tool has two stations. The first station puts a crimp in the crimp tube and the second station folds the crimped tube in half. The crimped and folded tube grips the jewelry wire. The image below shows what a crimp tube looks like when crimped to jewelry wire. The same rules apply here as well; if done properly, the crimp tube will be very secure. Over-squeezing can cause breakage of the crimp tube itself or the jewelry wire.
What happens if you crimp a bead too big?
Using the right size crimp bead or tube is also very important. If the crimp is too large for the jewelry wire, it won’t be able to grip the wire properly and it could slip, causing the jewelry piece to fail. If the crimp is too small, particularly with crimp tubes, the jewelry wire won’t have room to separate for the crimp action ...
What do you need to crimp a tube?
Crimp tubes come in a variety of sizes and metals, too, and some even have patterns on them. To crimp them, you need a crimping tool. There are different sized crimping tools for the various sizes of crimp tubes: Micro for tiny crimp tubes and mighty for some larger sizes. Very large crimp tubes can be flattened with a pair of flat or chain nose pliers. There is also a magical crimping tool that will shape the crimp tube into a bead shape. The image below shows the three different sizes of crimp tools described.
Can crimp bead be broken?
If done properly, the crimp bead will be very secure, but if the crimp bead is squeezed too hard it can break or at least be weakened and could fail over time as the jewelry item is worn. Over-squeezing can also bite into the jewelry wire itself, causing it to fray or break, which will also weaken the jewelry item.
What is a crimp bead?
Crimp beads are small beads with thin walls, made to be squashed and compacted into shape using crimping tools. Crimp beads are used to hide the knots in your beaded necklace or bracelet that are holding your pieces together, but can also strengthen these points in your jewelry designs, making sure your customers receive a piece ...
What pliers do you use for crimping beads?
If you don't have a pair of crimping pliers, you can however also use regular chain nose pliers or flat nose pliers.
WHAT SIZE CRIMPS TO USE?
Choosing the right sized crimp tube or bead is important when it comes to giving your beaded jewelry a professional finish. Although there are no hard and fast rules to go by. If the size of your crimp tube is a little too big for the wire you’re using, you may find that the crimp will not securely grip the wire in place, leaving your piece vulnerable to breaking at a later date. You should also avoid using crimp tubes that are too small for the wire you’re working with. While it may fit, if it’s too tight the wire may not sit correctly in the crimp tube, making it difficult to secure it into place.
WHAT ARE CRIMPING PLIERS?
Firstly, to make your jewelry look perfect, you should use special crimping pliers. You can recognize them by grooves inside of nose of the pliers. The main benefit of using crimping pliers is they allow you to get neat round shape of crimp bead. If you don't have a pair of crimping pliers, you can however also use regular chain nose pliers or flat nose pliers.
What happens if you don't crimp your crimp?
If the crimp tube is not properly in place, your crimp will not fold properly and your jewelry will not be secure. STEP 7.
How to crimp a ring?
Push the crimp closer to the jump ring or clasp, but don’t force it so that it’s too tight. Leave the jump ring or clasp a little space so that there is more movement in the piece. STEP 4. Once you’re happy with the position of the crimp, place it in the first notch of your crimping tool. STEP 5.
How many notches does a crimping tool have?
Get to know your crimping tool. Notice that your pliers will have two notches. The one that is closest to the handles features a small dimple to help the crimp bead form a figure of eight. The notch that is closest to the tip of the pliers will fold the crimp, use this to form a tube.
What is a crimp bead?
Crimp beads resemble a hollow round bead and come in a variety of metals and sizes. They are secured to jewelry-making wire by flattening the crimp bead with a pair of flat or chain-nose pliers. The flattened crimp bead grips the wire for a secure finish.
What is a crimp in jewelry?
Crimps are metal and mighty--holding stringing materials and beads together in jewelry designs. They are THE finding to keep your stringing projects intact, the "glue" that keeps a design together and can even be counted on to add flash to a design.
How to measure crimp tube?
Crimp tubes are measured length by outside diameter (OD), i.e. 3x2mm means 3mm long by 2mm around. You will also see the inside diameter (ID) measurement noted which indicates the inside space of the crimp and how much room there is for your stringing material. In most cases, a larger ID indicates a larger opening, where the smaller the opening indicates a thicker crimp wall and a stronger crimp hold, i.e. 2x2mm sterling silver crimp with a 1mm ID has a thicker wall than a 2x2mm crimp with a 1.3mm ID. You want your crimp to succeed so choose the right size but also the thickest metal possible.
How to make a bracelet with a gimp?
First, you had to string a short, coiled wire called bull ion (or gimp or French wire) so the thread wouldn't wear against the metal. Then you'd pass through the clasp, back down into the beads, tie a knot, pass through a few more beads, tie a knot, and on, and on and on.
What are crimp covers?
These are rounded pieces of metal, with a groove in them . I’ve shown you a detailed photo below.
Can you use a larger crimp cover?
So, you should size the cover according to the crimp, naturally. But you can also use a larger cover if you are working on a project with larger beads.
Do crimp beads close shut?
If you’ve ever used a crimp bead, you’ll know that they don’t always close shut in the neatest possible manner. So, by covering them, you don’t have to worry.
Is crimp cover easy to use?
Happily, crimp covers are very easy to use. But, like other small findings, they can feel a little tricky at first. They’re not expensive, so it may be worth trying a few on samples to get used to using them, before you add them to your best jewelry project.
Can you crimp beads with pliers?
This may not feel too bad on a lone sample. But it will get a little trickier on an actual piece of jewellery. You will have other beads and clasp near the crimp, so that can leave you less room to get access with your pliers. In this instance, you might want to try pliers with a narrower jaw. Just be careful – you don’t want to break or scratch any of the neighbouring beads and components.
What are crimp beads made of?
Crimp beads are available in two common shapes: tubes and rounded beads. They are made of a variety of metals, though the tubes are typically either sterling silver or gold-filled. Many beaders find that the tubes are easier to work with, so that might be a good place to begin if you're new to beading.
What happens if you use a crimp on a beading wire?
If you use a crimp with an inside diameter that is too large for your beading wire, the crimp may not adequately grip the wire , even after you close it with pliers. This can lead to the crimp slipping and, ultimately, the failure of your design.
What does a crimp cover look like?
Crimp covers look a little like metal donuts with a bite taken out. They slip over the crimp and look just like a metal bead when closed. They come in a variety of metal finishes to match any project. It's important to avoid crimps that are too small for your beading wire as well. Even if your wire fits through a small crimp, ...
Why is it important to avoid crimping beading wire?
It's important to avoid crimps that are too small for your beading wire as well. Even if your wire fits through a small crimp, the wire may not align properly when you close the crimp. This can also lead to failure of the strung bead design. One last aspect of choosing a crimp is the smoothness of the crimp.
Why are crimp tubes longer than shorter?
Some beaders find that longer crimp tubes are more durable than shorter ones because of the increased surface area. However, shorter crimps can be easier to attach and less unsightly than longer crimps.
Which is better for jewelry: crimp beads or tubes?
Many jewelry designers prefer crimp tubes over crimp beads. The tubes tend to be stronger than crimp beads and less likely to crack and break. Tubes may do a better job of gripping beading wire because they tend to have a larger interior surface area.
Can you use crimping pliers on a crimp?
Crimp tubes also allow you to use crimping pliers which make your crimps look less like tubes and more like beads that are part of your design. Crimp beads, however, are often more economical than tubes. Consider using beads for casual designs, or when your beading budget is tight. In addition to varying diameters, ...
