You create a detail view in a drawing to show a portion of a view, usually at an enlarged scale. This detail may be of an orthographic view, a non-planar (isometric) view, a section view, a crop view, an exploded assembly view, or another detail view. The enlarged portion is enclosed using a sketch, usually a circle or other closed contour.
What is a detail view?
A detail view is a partial generated view that shows only what is necessary in the clear description of the object. Note that, the Detail view command uses a Boolean operator from the 3D whereas the Quick Detail view command computes the view directly from the 2D projection.
What is the purpose of a detail view in a drawing inventor?
You can create and place a detail drawing view of a specified portion of a view, assigning any scale to the view. In Inventor, if creating a detail view of a presentation with trails, the trails are visible in the view, but can be turned off if needed.
How do you create a detail view?
To create a detail view,Click Annotation and then, in the Setup group, click the arrow next to Dep View.Click Create Detail View. ... Specify the parent view in one of the following ways: ... Click one of the border types: ... Draw a detail view border on the parent view.Click the first point of the border.Complete the border:More items...
How do I use detail view?
0:104:20SolidWorks Tutorial: Detail View - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo a detailed view to your drawing you click on this and of view layout click on the detailed viewMoreSo a detailed view to your drawing you click on this and of view layout click on the detailed view and it gives you this pencil. And if I just draw click a point and just draw my circle around and.
What is the purpose of a detail drawing?
A detail drawing provides complete and precise descriptions of a part's dimensions, shape and how it is manufactured. A detail drawing should be concise, in that it conveys only the information needed to create the part.
Where are detail drawings used?
Detail drawings provide a detailed description of the geometric form of a part of an object such as a building, bridge, tunnel, machine, plant, and so on. They tend to be large-scale drawings that show in detail parts that may be included in less detail on general arrangement drawings.
What is the difference between detail view and section view?
When you use the section-detail view, it will create a detail view. This is a section, but the view is being placed under details, not under sections. It may not seem like a big difference, but it has to do were the plans are being stored, and what you are wanting to do with these views.
What is the difference between crop and detail view?
A crop view focuses on a portion of a drawing view by hiding all but a defined area. The uncropped portion is enclosed using a sketch, usually a spline or other closed contour. You can crop any drawing view except a Detail View or a view from which a Detail View has been created.
What is the difference between a list view and detail view?
While the Detail View shows you all available information about one particular app, the List View gives you an overview of various apps in terms of the types of information you are currently interested in. You can easily switch back and forth between the two views by using the buttons at the bottom of your screen.
Can you dimension a detail view?
Once the dimension is imported into the Section View, expand the Detail View circle to see the entire diameter, then hold Shift and drag the dimension to the Detail View. With this dimension moved, you can resize the Detail View circle and the dimension will automatically be foreshortened.
How do I edit a detail view?
On the ribbon, click Place Views tab Create panel Detail . Click to select an existing view as the parent view. In the Detail View dialog, set the view identifier, scale, and visibility of the view label. If needed, click Edit View Label and edit the detail view label in the Format Text dialog.
What is master detail view?
A Master-Detail view is a view that contains a list of items on the side of the layout, and by tapping an item, the detail is shown next to it. These views are mostly used in big devices such as tablets, as they have more space to display more information.
How do you detail in Inventor?
0:562:10Inventor Drawing: Detail View - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo. I'm going to click right in the center of this area because this is the area I want the detailMoreSo. I'm going to click right in the center of this area because this is the area I want the detail of I'm going to click and I'm going to circle. The area that I want the detail. Of zoom back out and.
What does level of detail mean in Inventor?
Level of Detail representations improve capacity and performance. They suppress unneeded components or replace many parts with a single part representation to reduce memory consumption and to simplify the modeling environment.
What is a detail drawing called?
Detail drawings, sometimes called manufacturing drawings, usually show a single component and give all the information necessary for the manufacture of that component. The items these drawings should specify are: • The form or shape of the component.
What is view representation in Inventor?
A View representation preserves a part or assembly display configuration that you can recall by name when you work on the component. For example, you can define components as visible or not visible, enabled or not enabled.
What should a drawing show?
The drawing should show the finished product with all the parts assembled in their correct relative positions. This is done by producing the drawing in such a way as to show how adjacent parts fit together. Sometimes an assembly procedure is stated.
What is a manufacturing drawing?
Detail drawings, sometimes called manufacturing drawings, usually show a single component and give all the information necessary for the manufacture of that component. The items these drawings should specify are:
What is 2D modeling?
Two-D modeling is a modern term given to the production of two-dimensional drawings. Historically, 2-D drawings represented every component, every subassembly, and the general assembly. A 2-D detail drawing has to be as technically accurate as the component it represents. The technique of drafting has grown, by necessity, to be a very precise method of describing the shape and size of components. It is subject to precise standards such as British Standards BS8888 or the American Society of Mechanical Engineers (ASME) Y14.2, Y14.3, and Y14.5.
What is vendor drawing?
Vendor drawings are the detail drawings provided to the engineering company for approval by an external supplier of purchased equipment. They are used by the external supplier for the fabrication of this equipment. These take the form of such items as pumps, vessels, tanks, exchangers, specialty items, and instruments.
What is a general assembly drawing?
The general assembly drawing is an assembly of all the subassemblies, showing their location within the overall product.
Do you need a cover sheet for vendor drawings?
Vendor drawings are issued as a listed attachment to the EWP. A cover sheet and a drawing index are not required.
Do you draw nuts and bolts on a drawing?
Nuts and bolts are not normally drawn on detail drawings unless they are of a special type. They are shown on assembly drawings and, provided they are standard stock sizes, are called up in parts lists and schedules. A description of the head, the thread and the length are generally sufficient.
What is detail view?
You create a detail view in a drawing to show a portion of a view, usually at an enlarged scale. This detail may be of an orthographic view, a non-planar (isometric) view, a section view, a crop view, an exploded assembly view, or another detail view. The enlarged portion is enclosed using a sketch, usually a circle or other closed contour.
Why do detail views expand in the FeatureManager design tree?
Detail views expand in the FeatureManager design tree so that all components and features are available.
What are the two types of views used in drawing?
4.1: Types of views used in drawings. The two main types of views (or “projections”) used in drawings are: Pictorial views show a 3-D view of how something should look when completed. There are three types of pictorial views: A perspective view presents a building or an object just as it would look to you.
What is perspective view?
A perspective view presents a building or an object just as it would look to you. A perspective view has a vanishing point; that is, lines that move away from you come together in the distance. For example, in Figure 1, we see a road and line of telephone poles.
What are the two types of views?
The two main types of views (or “projections”) used in drawings are: pictorial. orthographic. Pictorial views. Pic torial views show a 3-D view of how something should look when completed. There are three types of pictorial views: perspective. isometric.
How to magnify a detail view?
Click the center of the area to magnify. Click a corner to define the area to magnify. The detail view identifier is placed at the place you clicked and a preview of the detail view appears at the cursor. Note: If required, you can reposition the identifier after you create the detail view.
How to control detail view format?
Tip: The format of the detail view is controlled by the current detail view style. You can override these settings using the Detail View Creation Ribbon Contextual Tab. For example, you can specify the detail view identifier, scale and visibility of the detail view label.
Is model documentation available on 64 bit?
Note: Model documentation is available only on 64-bit systems.
What is engineering drawing?
An engineering drawing is a subcategory of technical drawings. The purpose is to convey all the information necessary for manufacturing a product or a part. Engineering drawings use standardised language and symbols. This makes understanding the drawings simple with little to no personal interpretation possibilities.
Where is the top view on a camera?
Here, the top view is under the front view, the right view is at the left of the front view, etc. The ISO standard is primarily used in Europe. On the right, you can see a third-angle projection. The right view is on the right, top view on the top of the front view, etc.
What is orthographic view?
This is the bread and butter of an engineering drawing. An orthographic view or orthographic projection is a way of representing a 3D object in 2 dimensions.
What is hidden line?
Hidden lines can show something that would not be otherwise visible on the drawings. For example, hidden lines may show the length of an internal step in a turned part without using a section or a cutout view (we explain both later). Centre lines are used to show hole and the symmetric properties of parts.
What does the line thickness mean in drawing?
This represents the physical boundaries of an object. Put simply, these lines are for drawing the objects. The line thickness varies – the outer contour uses thicker lines and inner lines are thinner. Hidden lines can show something that would not be otherwise visible on the drawings.
Is a drawing board still good for manual drafting?
A few decades ago, you would have had to sit down at a drawing board covered with papers of different size, rulers, callipers, etc. Today, all these instruments are still good for manual drafting but no contemporary manufacturer really wants such drawings.
Is outsourcing drawings a trend?
Thus, if you still outsource your production to manufacturing companies who need drawings, you must know the basics at the very least.
What is Detail 2?
Detail #2 is found on Architectural drawing A-9 as shown by the reference above. The purpose is to show in greater detail the area that is outlined. The dimension shown are in metric.
What is elevation view?
The elevation view shows the outside of the building from every orientation (North, South, East & West).
What does the symbol on a drawing mean?
The symbol helps you find the detail or section that is being referenced by the symbol . As shown in the example above the detail or section can be found on drawing “A-9”, Detail or Section #1. The arrows indicate the direction that you would be looking toward. The detail or section view will show you what you would see if you were standing there looking at the building components.
How many drawings are there in a floor plan?
Each floor in the building will have its own drawing, unless the floor is too large to fit onto one drawing then there will be more than one drawing per floor. The floor plan shows all the rooms, doorways, windows, stairways, elevators and whatever the Architect believes is pertinent information for an understanding of the floor plan. The Architects as indicated below as identified the following on this floor plan;
