What is Doorcatcher? Doorcatcher offers both a physical and visual barrier for outward opening doors and windows, preventing injury to individuals while protecting the door and frame from damage. Our unique door buffer stop/door holder is safe, vandal resistant and fitted as standard to all our door guards.
What is a ball catch door handle?
The ball catch is a steel ball with a spring underneath which, when the door is closed, "catches" (hence, the name) into a small indent on the ball catch strike plate. There are generally two types of ball catches: A drive-in ball catch does not have a plate, and is inserted directly into the top of your door.
What are the different types of door catches?
We explain the most common types of catches used around the house below. Bales catch. The Bales catch (sometimes referred to as just 'a ball catch'), has a spring loaded ball held within a cylinder attached to a flange. The catch is recessed into the edge of the door while the striker plate is recessed into the jamb. Roller catch.
Do you need a doorknob for a ball catch door?
This hardware does not require the twisting of a doorknob to open your door. Because of that, it is common to use a false doorknob in conjunction with ball catches. Install the ball catch into the top of the door and a strike plate in the door jamb where the spring-loaded ball will catch and keep your door securely closed.
What is a catch on a cabinet door?
The door catch is a fitting to keep a closed door at a normal position and not to naturally open due to a wind pressure. The catch body is fitted on the front of the top and bottom plates of a cabinet and the strike is fitted on the door side.
How does a door catcher work?
When it's locked, the cylinder engages a series of spring-loaded pins which keep the cylinder from turning. When you insert a key, the uneven edge pushes the pins upward to fit the key's height in that location within the lock body. Essentially, it recognizes the correct key when the pins move into their proper places.
What is the catch on a door called?
LATCH AND DEADBOLT The spring-loaded metal part of the mechanism that protrudes out of the door is called the latch.
What's the difference between a latch and catch?
A catch is mounted on the inside, side or bottom of the door and you don't often see it like you would see a latch. A catch works automatically; you don't have to 'work' it like a latch.
What is a catch on a lock?
A latch or catch (called sneck in Northern England and Scotland) is a type of mechanical fastener that joins two (or more) objects or surfaces while allowing for their regular separation.
What are the different types of catches?
Catches and LatchesMagnetic Catches.Friction Catches.Touch Catches.Passage Door Stops.Recessed Catches.Double Door Catches.Specialty Catches.
What is the thing that closes a door called?
Lockset Also known as hardware, this is everything used that secures, keeps closed or locks the door. The lock and knob or handle typically come as a set sold in a single package. In many places today, the accessibility codes require handles or levers rather than knobs.
What are catches used for?
Catches and latches are terms frequently interchangeable but importantly they are mechanical fasteners that allow the joining between two hardware surfaces that frequently are used for the enclosure of cabinets, cabinets and door furniture.
What is a cupboard catch?
As the name implies, the touch cabinet catch is for the doors without pulls, knobs, and handles. It has a touch latch that works on a “one-push” mechanism.
What is a Latchbolt?
A latch bolt is the part of a door that keeps the door from coming open. In order to be a latch bolt, the item needs to slide into place. This separates the latch bolt from chain locks or hooks, where the fastening mechanism is simply placed in a holder.
What is the plate behind a door knob called?
Trim: Sometimes called a rose, the trim is a decorative plate attached to the door under the knob or lever.
What is the top lock on a door called?
Lock Grades and Ratings Deadbolts provide the highest level of front door security. To ensure your door locks provide solid home security, choose locks and deadbolts that are pick-resistant and bump proof.
What are the parts of door hardware?
A: The five main types of door hardware include doorknobs, lever handles, deadbolts, handlesets, and door hinges.
What is a latch on a door?
Door latches are a type of mechanical hardware used to fasten doors and keep them shut. A door latch uses a fastener attached to two ordinarily separated surfaces, most often the door and the frame, to prevent the door from swinging while still allowing normal operation when the latch is released.
What is a strike on a door?
When discussing door hardware, a "strike" or "door strike," refers to the metal plate or assembly that's installed into or onto a door frame to "catch" the latch or bolt to hold the door closed. You've seen thousands, maybe millions, of door strikes in your lifetime.
What is a strike plate on a door?
Strike plate: Similar to a faceplate, the strike plate is a metal plate that is affixed to the doorjamb and has a hole (or holes) that accommodate the lock bolt. It is not only decorative. The strike plate protects the doorjamb and adds security to the opening.
What is a door bolt?
Definition of door bolt : a sliding bolt for locking a door.
Why do latches have a safety catch?
To prevent accidental opening, these latches have a safety catch.
How to open and close a latch?
Lift and turn the handle 180° to open and close these latches.
How to secure a latch on a corner?
Mount these latches on a corner to draw perpendicular surfaces together. Add a padlock to secure them.
Why do latches snap in place?
These latches snap in place to eliminate rattling and hold access doors, screens, windows, and panels.
What temperature can a latch withstand?
These latches withstand temperatures up to 480° or 570° F.
How do doors stay closed?
Doors stay closed with the pressure of rollers against the strike plate.
Where to attach padlockable latches?
Attach these padlockable latches vertically to the side edge of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted behind it on the frame.
How to adjust door ball catch?
Here are the two best ways to adjust your door ball catch: First, get yourself up on a stepladder or sturdy chair, and take a look at your ball catch. Take special note of the two grooves, or "notches", on the inside ball catch cylinder. Option 1.) Use a 3/4" chisel, and press downwards directly on the steel ball until your 3/4" chisel is inside ...
What is a ball catch?
The ball catch is a steel ball with a spring underneath which, when the door is closed, "catches" (hence, the name) into a small indent on the ball catch strike plate. There are generally two types of ball catches:
How does a ball catch work?
A ball catch is a metal ball sitting on top of a spring. That ball and spring are encased in a cylinder, and on the outside of that cylinder it is threaded (like a large screw). That cylinder is seated inside a second, larger cylinder which also has threading.
Where is the drive in ball catch?
A drive-in ball catch does not have a plate, and is inserted directly into the top of your door.
Why is my ball catch rusting?
Sometimes, dust, and debris can affect the spring and ball inside the ball catch cylinder, and moisture can even cause some rusting. If that is the case with your current ball catches, consider replacing them.
What is a ball catch?
The Bales catch (sometimes referred to as just 'a ball catch'), has a spring loaded ball held within a cylinder attached to a flange. The catch is recessed into the edge of the door while the striker plate is recessed into the jamb. The roller catch is similar to the Bales catch except that a roller is used instead of a ball.
What is a double ball catch?
Double ball catch. A double ball catch has two balls in a casing which hold the striker inplace when it is inserted between them.
How does touch latch work?
The touch latch works on a 'push once to latch, push another time to release. The main body is fitted to the inner side of the cupboard and the striker plate (or more accurately, the catch) is fitted to the inside of the door to line up with the catch. Lift-up stay.
Where does the turn handle catch fit?
Unlike the other catches on this page, which all fit behind the door and work without special attention, the turn handle catch fits to the front of the door and works by 'twisting and pulling'.
Where is the roller fitting on a door?
The roller fitting and sticker plate are recessed into the door and jamb respectively.
