Which double Hunter pocket watches do we stock?
We stock a range of double hunters including the double hunter mechanical pocket watch, double hunter silver pocket watch and the double hunter swiss made pocket watch. Double hunter pocket watches make excellent gifts, especially for special occasions and can be engraved on either the front or back cover with the message of your choosing.
What is a hunter-case pocket watch?
A hunter-case pocket watch is a case with a spring-hinged circular metal lid or cover, that closes over the watch-dial and crystal, protecting them from dust, scratches and other damage or debris.
Where is the 12 on a double Hunter pocket watch?
On double hunter pocket watches, the ”12” would be located just below the stem of the pocket watch; which would mean when the watch is sitting on its own, the time would be facing the correct way. The double half hunter pocket watch is a combination of the double hunter and the half hunter pocket watches.
What is a half hunter watch?
The half hunter is a variation on the full hunter. It has a similar feel with a dial protected by a hinged case, however the case has a window in the middle, allowing the user to read the time without having to open the case. The half hunter often has numerals on the case around the window to make it even easier to read the time.
What is the difference between a half hunter and a full hunter pocket watch?
A Half Hunter pocket watch has a lid with a small round glazed window. The time can be seen when the lid is closed. A Full Hunter has a protective lid that can be opened to reveal the watch face. A Double Hunter has two lids covering both the back and front of the pocket watch.
What is a hunter pocket watch?
A hunter-case pocket watch is a case with a spring-hinged circular metal lid or cover, that closes over the watch-dial and crystal, protecting them from dust, scratches and other damage or debris.
How do you open a double hunter pocket watch?
0:433:01How to Open & Close a Hunters Case Pocket Watch | Proper HandlingYouTubeStart of suggested clipEnd of suggested clipTo open a watch all you need to do is depress the crown here and it will swing open and this one'sMoreTo open a watch all you need to do is depress the crown here and it will swing open and this one's got good Springs it just pops right open.
What is a full hunter case?
A full hunter hunter pocket watch features a solid outer case concealing the watch face until opened. The double hunter has one extra feature - a second lid at the back to allow viewing of the mechanism.
How do I know if my pocket watch is valuable?
Indicators of High Value Gold case: A gold case marked 14K, 18K or 750 with the stamp on the inside back cover of the watch are more valuable than unmarked watches. If there is no stamp, it is not gold. Heavy weight: The weight of a pocket watch may indicate that it has a sophisticated movement or a case of solid gold.
How do you know if a pocket watch is good?
Here are 5 characteristics that can quickly distinguish a quality pocket watch:Jewel Count. Movements with 17 or more jewels contain hole jewels for the entire gear train, giving the movement improved accuracy and longevity. ... Screw-set Jewels. ... Micrometer Regulator. ... Double-Sunk Dial. ... Adjustments.
How often do you need to wind a pocket watch?
Mechanical pocket watches have to be wound between 30 and 40 half turns for a full wind. This will last on average a full day before having to be wound again. Remember, winding the watch more doesn't allow it to keep the time longer and if the stem doesn't turn anymore do not force it to!
What happens if you over wind a pocket watch?
To wind the watch turn the crown in the clockwise direction anywhere from 30-40 half turns until it stops. Push the crown back down into the normal operating position. Winding and setting of the time should be done daily. However, do not over wind, as this can damage the spring mechanism.
Why do pocket watches open on both sides?
They needed a way to protect the crystal from cracks and scratches while they were active during hunting trips, so they created a case that had a metal cover on top of the crystal. These cases will almost always have a hinge and pop open on the front and back.
What is a railroad pocket watch?
A railroad grade pocket watch is simply a watch that was approved by a particular railroad organization for use by conductors on their rail. The specific definition of a “railroad grade” watch evolved quite a bit over the years. And, contrary to common belief, there were many regulations in place before Webb C.Railroad Grade Pocket Watches Explained | The Vortic Bloghttps://vorticwatches.com › blogs › railroad-grade-pocket-...https://vorticwatches.com › blogs › railroad-grade-pocket-...Search for: What is a railroad pocket watch?
How do I know what pocket watch I have?
Remove or open the back cover from your watch and look for a number engraved into the movement; this is the serial number for your watch, and by using it, you can find the closest years it was made on these tables.Pocket Watch Serial Number Production List - PM Time Servicehttps://www.pmtime.com › SERIALShttps://www.pmtime.com › SERIALSSearch for: How do I know what pocket watch I have?
What is a large pocket watch called?
The Double Hunter is typically a larger pocket watch, usually containing a mechanical movement. The watch will have a skeleton dial enabling the user to see the workings around the watch hands.Types Of Pocket Watch | Discover Movement, Case Styles And Morehttps://www.pocketwatch.co.uk › types-of-pocket-watchhttps://www.pocketwatch.co.uk › types-of-pocket-watchSearch for: What is a large pocket watch called?
Where is the 12 on a double hunter watch?
On double hunter pocket watches, the ”12” would be located just below the stem of the pocket watch; which would mean when the watch is sitting on its own, the time would be facing the correct way. DOUBLE HALF HUNTER POCKET WATCH. The double half hunter pocket watch is a combination of the double hunter and the half hunter pocket watches.
What is the difference between a double hunter and a full hunter?
The double hunter pocket watch has many of the same features as the Full Hunter – with the front face of the pocket watch covered with a protective lid – but the difference with a double hunter case is that there is a lid which opens on the back of the pocket watch too.
What are the aesthetics of pocket watches?
These elements can determine the value and age of the watch, as well as being ultimately more or less attractive to each owner and potential buyer.
What are the different types of pocket watches?
Pocket watches are often classified by the type of face display they are endowed with – there are five main types: open-face, half hunter, full hunter, double hunter and the half double hunter. OPEN FACE POCKET WATCH.
What is a half hunter watch?
The half hunter often has numerals on the case around the window to make it even easier to read the time. The Double Hunter is typically a larger pocket watch, usually containing a mechanical movement. The watch will have a skeleton dial enabling the user to see the workings around the watch hands.
Why did they make full hunter watches?
The porcelain front of early open face pocket watches was easy to break and so the full hunter was created to make the watch more durable. As the design became more popular, manufacturers would create full hunter watches with intricate engravings on the front case. This would make the watch more appealing to people with an eye for detail.
Why did railroaders wear pocket watches?
This is because in the 1880's all railway workers were required to carry a pocket watch of a certain standard to ensure timings were met across the railway networks. These watches would have typically been open face as other types of cases were not yet introduced.
What are the different types of pocket watches?
Pocket watches are often classified by the type of face display they are endowed with - there are five main types: open-face, full hunter, half hunter, double hunter and the double half hunter. The open face pocket watch is one of the oldest design of watch. The style can also be known as the railroaders watch.
What are the aesthetics of pocket watches?
Although pocket watches are essentially a single design, there are a few different aesthetic elements that greatly affect the way the pocket watch is used and displayed. These elements can determine the value and age of the watch, as well as being ultimately more or less attractive to each owner. Collectors tend to stick with one particular design ...
Can a double hunter be opened on both sides?
The double hunter can also be opened on both sides allowing it to stand as a desk clock. Front And Back Cover With Window. The Double Half Hunter has all the luxurious features of the double hunter with the added bonus of a viewing window on the front.
What is a demi hunter watch?
A minor variation on the hunter case is the demi-hunter style, which has a small "window" in the front cover through which the hands (or part of the hands) may be viewed. This is sometimes complemented by an enamel inlaid "dial" in the lid in the case, so that one can easily tell the time without needing to open the watch. Thus the demi-hunter provided the convenience of an open-face watch with the protection of a hunter-cased watch. Demi-hunter cases are much more common on watches of European origin; we don't see very many American watches in demi-hunter cases.
What are the components of a pocket watch?
There are two distinct major "components" to most pocket watches: The watch case and the watch movement. The movement is the inner "works"... the actual time-keeping mechanism of the watch. The watch case is the outer protective cover, including the crystal that covers the dial. The case also includes (or accommodates) the winding stem and crown.
What is an open face watch?
If there is no metal cover over the dial, then it's an "open face" watch. An open-face watch just has a "crystal" over the dial (usually made of mineral glass). If there is neither a metal cover nor a crystal, then it's likely that something's missing. Sometimes the bezel (the round metal ring that retains the crystal) is lost, which makes it impossible to replace the missing glass (see this article for more information on vintage pocket watch bezels).
What is the difference between a hunter case and an open face case?
The primary difference between a hunter-case movement and an open-face movement is the relative positioning of the winding arbor and the seconds bit, and the positions of the dial-feet.
What is important about antique watches?
What's important to know about antique American watches is that cases and movements were usually made by different companies. There were watch manufacturers and there were case manufacturers. American pocket watches used a system of (relatively) standard watch sizes, so it was possible for a customer to select the watch movement they wished ...
Is a sidewinder a hunter case?
Note that it's only called a side-winder if it is a hunter-case movement in an open-face case.
What is a hunter case watch?
A hunter-case pocket watch is a case with a spring-hinged circular metal lid or cover, that closes over the watch-dial and crystal, protecting them from dust, scratches and other damage or debris. The name originated from England where "fox hunting men found it convenient to be able to open their watch and read the time with one hand, while holding the reins of their 'hunter' (horse) in the other hand". It is also known as a "savonnette", after the French word for soap (savon) due to its resemblance to a round soap bar.
Who made the Hamilton 992 pocket watch?
Movement of a 1914 Hamilton 992 Railroad grade pocket watch. Invented by Adrien Philippe in 1842 and commercialized by Patek Philippe & Co. in the 1850s, the stem-wind, stem-set movement did away with the watch key which was a necessity for the operation of any pocket watch up to that point.
Why are pocket watches used in railroads?
The rise of railroading during the last half of the 19th century led to the widespread use of pocket watches. A famous train wreck on the Lake Shore and Michigan Southern Railway in Kipton, Ohio on April 19, 1891 occurred because one of the engineers' watches had stopped for four minutes. The railroad officials commissioned Webb C. Ball as their Chief Time Inspector, in order to establish precision standards and a reliable timepiece inspection system for Railroad chronometers. This led to the adoption in 1893 of stringent standards for pocket watches used in railroading. These railroad-grade pocket watches, as they became colloquially known, had to meet the General Railroad Timepiece Standards adopted in 1893 by almost all railroads. These standards read, in part:
Why do pocket watches have chains?
Pocket watches generally have an attached chain to allow them to be secured to a waistcoat, lapel, or belt loop, and to prevent them from being dropped. Watches were also mounted on a short leather strap or fob, when a long chain would have been cumbersome or likely to catch on things.
What is a savonette watch?
For the succulent plant, see Crassula muscosa. Savonette with cathedral hands and luminescent dial made by Thos. Russell & Son (probably in the 1920s) A gold pocket watch with hunter-case and watch chain. Pocketwatches evolved from clock-watches, supposedly called Nuremberg eggs, worn on chains around the neck.
What is a watch key?
This was usually done by opening the caseback and putting the key over the winding-arbor (which was set over the watch's winding-wheel, to wind the mainspring) or by putting the key onto the setting-arbor, which was connected with the minute-wheel and turned the hands. Some watches of this period had the setting-arbor at the front of the watch, so that removing the crystal and bezel was necessary to set the time. Watch keys are the origin of the class key, common paraphernalia for American high-school and university graduation.
What is an open face watch?
An open-faced, or Lépine, watch, is one in which the case lacks a metal cover to protect the crystal. It is typical for an open-faced watch to have the pendant located at 12:00 and the sub-second dial located at 6:00. Occasionally, a watch movement intended for a hunting case (with the winding stem at 3:00 and sub second dial at 6:00) will have an open-faced case. Such watch is known as a "sidewinder." Alternatively, such a watch movement may be fitted with a so-called conversion dial, which relocates the winding stem to 12:00 and the sub-second dial to 3:00. After 1908, watches approved for railroad service were required to be cased in open-faced cases with the winding stem at 12:00.