What is a Dr Bristol patent?
The Dr. Bristol patent describes the way in which Dr. Bristol himself intended the bit to be fitted. The way it was intended would have meant that the central plate would, upon rein contact, sit flat against the tongue, therefore benefiting from a great weight bearing surface.
How do you choose a bit?
We call the angle at which it sits the ‘working angle’ and this is really the position that matters when choosing a bit. The Dr. Bristol patent describes the way in which Dr. Bristol himself intended the bit to be fitted.
Are Dr Bristol and the French link the same thing?
The Dr. Bristol bit and the French Link may be similar in the parts used to build them, but the way they are constructed makes them very different. Lucy Walton from Neue Schule takes us through the science bit.
Why is it like that when giving a horse this bit?
Can you mistake a French link for a Dr Bristol?
Are Dr Bristol bits harsh?
A Dr Bristol plate lies opposite to the tongue, meaning the plate edge digs in the tongue making it quite a harsh bit, even in gentle hands. A horse can not move into the riders hands for a true outline with this bit.
Is a DR Bristol bit strong?
Dr Bristol Eggbutt Snaffle features: Works primarily on the tongue with a sharp action due to the straight edged angled plate, and to a lesser degree on the bars. A strong bit not recommended for novice riders, but can be very useful on strong horses and those that lean. Bit strength: Strong.
What is the difference between a DR Bristol and a French link?
The French Link is widely considered to be one of the mildest and most comfortable mouthpieces while the Dr. Bristol is considered to be harsh and strong. This is reflected by rules of various governing bodies, where the French Link is allowed to be used in some sports that the Dr. Bristol isn't permitted for.
How does a Dr Bristol work?
The Dr Bristol uses tongue pressure to encourage the horse to go on the bit, the flat shaped lozenge centre piece is set at an angle therefore causing a sharper, more pronounced pressure to the tongue, this bit will not encourage a true contact although may be useful if you need that extra bit of help in order to slow ...
What is the best bit for a horse that pulls?
The Waterford is the most well known bit for this type of evasion, and can help to prevent leaning but should be used sympathetically. Myler combination bits often work well, the 30 04 being popular or the 30 42 if the horse puts his head down whilst pulling.
What is the gentlest bit for a horse?
eggbuttOne of the most common types of snaffle bit is the eggbutt, which is considered to be the gentlest type of snaffle bit because it doesn't pinch the corners of the horse's mouth. It has an egg-shaped connection between the mouthpiece and the bit-ring.
What bit is best for a horse with a sensitive mouth?
One of the kindest bits available! The baucher is the most stable of all the cheek pieces. This stability often calms an overactive mouth, combined with the ultra sensitive Tactio mouthpiece its a match made in heaven!
What is a stronger bit than a snaffle?
Curbs. These provide greater control compared to the snaffles. How it works: by putting pressure on four areas, the tongue, corners of the mouth, bars and the chin groove.
Is a Kimberwick bit harsh?
The shank is shorter as well, so Kimberwicks are usually considered a bit milder than Pelham bits. As with any bit — but especially curb bits — it's important that the rider knows how to use a Kimberwick properly, so the rider achieves the desired control without creating discomfort for the horse.
Are correction bits harsh?
This is a bit intended to be used for training purposes only, not for general everyday riding. It is a fairly severe bit, and in the hands of someone who doesn't understand how it works and doesn't understand how to use rein aids effectively, it could create more problems than it solves.
Are Mullen mouth bits harsh?
A mullen mouth is an unjointed bit that is slightly curved to accommodate the horse's tongue. Without the nutcracker action of a jointed bit, the mullen mouth and straight-bar are considered milder and encourage the horse to raise his poll.
Is a chain mouthpiece bit harsh?
Chain mouthpieces use either link or bicycle chain. These bits are very severe, and their use is generally frowned upon.
Is a Kimblewick a strong bit?
It's important to note that while the Kimblewick is a very useful bit, and is successfully used by showjumpers, it can be quite a 'strong' bit in the wrong hands!
What bit is best for a strong pony?
PERFECT for the strong or pulling pony! The Neue Schule Verbindend is one of the most popular bits at Bit Bank and Neue Schule make sure the ponies are covered too! This bit uses no tongue pressure and works more off the lower jaw so its great for a strong pony YET perfectly safe in a young riders hands.
How harsh is a correction bit?
This is a bit intended to be used for training purposes only, not for general everyday riding. It is a fairly severe bit, and in the hands of someone who doesn't understand how it works and doesn't understand how to use rein aids effectively, it could create more problems than it solves.
What is the softest bit on a horse mouth?
The softest bits are generally snaffle bits made of rubber. Rubber offers a smooth fit on the bars of the horse's mouth, while the snaffle's rings fit softly in the corners of the horse's mouth without pinching.
Dr.Bristol Bit? good or bad? | The Horse Forum
I agree, contacting the previous owner asking them why they use that particular bit. Find out if they knew it was a Dr Bristol, or did they believe it was a French Link like many mistake the mouthpiece to be?
Jessica Jahiel's HORSE-SENSE Newsletter Archives
Jessica Jahiel's HORSE-SENSE Newsletter is a free, subscriber-supported electronic Q&A newsletter dealing with all aspects of horses, their management, riding, and training. The HORSE-SENSE Newsletter archives contain over 1300 articles and are indexed and searchable. Since 1995.
Four Different Types of Horse Bits and Their Uses - Equiniction
• The single joint snaffle is commonly used all over the world for everything from trail riding to Western to dressage to jumping. This simple bit is usually very affordable and freely available. The bit has no leverage, but its single joint provides a “nutcracker” action, squeezing the bars of the mouth and placing pressure on the palate.
Which Bit Is Right For Me? | Tom Balding Bits & Spurs
Which Bit Is Right For Me? Bit Mouthpieces And Rings Explained - Common Understanding Of Bit Functions. Have you noticed that you can ask two equine experts the same bit question and get two very different answers?
Dr Bristol Eggbutt Snaffle is Permitted Saddlery for USEA Dressage
No worries when the ring steward checks your bit, Dr Bristol Bit is dressage legal (# 12 in the image below).
The Mechanics of a Dr Bristol Bit
The Dr. Bristol mouthpiece is a three-piece mouthpiece. F lat rectangular link in the middle set at an angle in relation to the sides. The angle gives you a little sharper pressure on the tongue for those horses that are a little stronger in the bridle or have a tendency to want to lean on the bit.
The Dr. Bristol bit and the French Link may be similar in the parts used to build them, but the way they are constructed makes them very different. Lucy Walton from Neue Schule takes us through the science bit
The Dr. Bristol bit and the French Link may be similar in the parts used to build them, but the way they are constructed makes them very different. Lucy Walton from Neue Schule takes us through the science bit.
But is the French Link really milder than the Dr. Bristol?
Dr Bristol: : You can see here how the edge of the French Link plate digs down into the tongue while the plate of the Dr. Bristol sits flat against the tongue while under rein contact.
Where is the Dr Bristol mouthpiece?
A Dr Bristol's mouthpiece is designed to position in the horses mouth with the bar in the middle of the mouthpiece to rest at an angle, where the edge of the metal bar is directly onto the horses tongue.
Is Dr Bristol a mild horse?
It depends on the horse, and the bit. Some Dr Bristol's are mild, others are more harsh. It depends on the size of the middle piece, the thickness, and how it's angled.
Does Dr Bristol have a French link?
Where a French Link rests flat on the horses tongue, the Dr Bristol does not . So when the reins are pulled and the bit comes into effect - the edge presses down onto the horses tongue.
Why does Dr Bristol use tongue pressure?
Because the mouthpiece has two joints, it shouldnt cause any interference with the roof of the mouth. The Dr Bristol uses tongue pressure to encourage the horse to go on the bit, the flat shaped lozenge centre piece is set at an angle therefore causing a sharper, more pronounced pressure to the tongue, this bit will not encourage ...
What is an eggbutt bit?
The eggbutt is a fixed cheek bit, this may be useful for horses that are a bit unsure of the bit as it doesnt move around to much in the mouth, it should encourage the horse to stretch into the contact. An eggbutt bit would be less suitable if your horse is prone to leaning or taking hold of the bit.
Why is it like that when giving a horse this bit?
Why is it like that? The reason is when giving the horse this bit, the lower edge of the link goes into the tongue as you hold the reins.
Can you mistake a French link for a Dr Bristol?
So, don’t mistake a French link for a Dr Bristol! Though they may look the same in some ways; I believe that with my comparison above, you can easily tell them apart. Good luck!
