The GE add-on switch replaces your current switch, uses existing wiring and provides your home with ultimate flexibility when combined with a GE In-Wall Smart Switch, Dimmer or Fan Control.
Full Answer
How does the add-on switch work with GE Home Automation?
The add-on switch sends commands to the connected in-wall Z-Wave or Zigbee switch, dimmer or fan control for full use of home automation features in 3-way configurations. For easy installation, the add-on switch only requires neutral, traveler and ground wires. It cannot be used as a standalone switch. Requires a GE Home Automation Switch.
What devices are compatible with GE smart lighting control add-on switch?
It is compatible with GE In-Wall Z-Wave, Bluetooth, and ZigBee Switches, Dimmers and Fan Controls, providing your home with ultimate flexibility.The GE Smart Lighting Control Add-On Switch operates as your home automation systems secondary control where three-way or four-way wiring configurations are required.
Can I use a 3-way switch with a GE smart switch?
Some things to know: 3-way wiring for smart switches is different than standard 3 way wiring. You cannot use dumb 3-way switches with smart switches (You must purchase the matching GE add-on switch to wire with your GE smart master switch).
What is the lamp module on a GE Z Wave switch?
The lamp module enables wireless control of on/off and dim functions for standard incandescent table and floor lamps, as well as dimmable fluorescent, LED and CFL fixtures and more. Take control of your home lighting with GE Z-Wave Smart Lighting Controls! Transform your home into a smart home with the GE Z-Wave In-Wall Smart Switch.
What does an add-on switch do?
The add-on switch sends commands to the connected in-wall Z-Wave or Zigbee switch, dimmer or fan control for full use of home automation features in 3-way configurations. For easy installation, the add-on switch only requires neutral, traveler and ground wires. It cannot be used as a standalone switch.
Do I really need to use GE add-on switches for GE smart switch?
No, you don't really need to buy a GE Add-On Switch.
How does GE smart switch work?
3:1510:17C by GE Dimmers and Smart Switches Review - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe wi-fi smart dimmer switch with color. Control as you can see here you get the included. PlateMoreThe wi-fi smart dimmer switch with color. Control as you can see here you get the included. Plate command strips which allow the device to directly adhere to any surface within your household.
Does GE Smart switch need a hub?
Unlike the Caséta products, though, GE's new switches and dimmers do not require a hub and can connect directly to a Wi-Fi network. They can work directly with Amazon's Alexa or the Google Assistant voice assistants. (Apple HomeKit support does require the use of an additional hub.)
Are smart switches worth it?
A smart switch replaces your old wall switch and controls the power to your light fixture. Most people install standard lights in the fixture. If you have no desire for color changing bulbs, then you don't really have a decision to make. Smart switches are the better choice for sure.
Are Lutron switches worth it?
But, after testing both options extensively, I'm convinced that Lutron is the far superior choice, and well worth the extra cash. It's smart lighting that actually feels smart, and a clear Editors' Choice-winner for the connected home.
Are GE smart switches good?
C by GE smart switch is a well made, smart switch that can work in any connected home today that has the right electrical wiring. It's easy to install, integrates with Google and Amazon, and doesn't require a hub, unlike many smart switches with motion, ambient light sensors and dimmers.
How do I setup my GE smart switch?
Launch the C by GE app on your phone or tablet.Tap Add in the top right corner.Then tap Add New Devices.Select C-Start Switches.Tap Get Started.Tap Continue when you see that light.Select the smart switch from the list. Select Continue to proceed.Select your WiFi network from the list and tap Continue.More items...
How do I install GE on Wall smart switch?
0:007:37How to Install GE Smart Switch & Connect SmartThings + Google HomeYouTubeStart of suggested clipEnd of suggested clipSo the first thing that we need to do is make sure that the power is off before we open up the boxMoreSo the first thing that we need to do is make sure that the power is off before we open up the box and install the language let's get done okay. So let's go down here and turn off the power.
How do I wire a GE smart switch?
4:356:06Cync Neutral Wire (4-Wire) Smart Switch: How to Install for 3-WayYouTubeStart of suggested clipEnd of suggested clipOn the line side instead of capping the second traveler wire connect it to the neutral wiresMoreOn the line side instead of capping the second traveler wire connect it to the neutral wires associated with that circuit group together with the neutral wire of the sync smart switch.
What do smart switches do?
Smart Switch can be used to transfer between tablets, between smartphones, and between a tablet and a smartphone. Please note: To use Smart Switch, your phone must run Android 4.3 or iOS 4.2. 1 or later. You can transfer your data from both Android and iOS devices over Wi-Fi, with a USB cable or with a PC or Mac.
Does GE smart switch need a neutral wire?
The new 3-wire line of C by GE smart switches don't require a neutral wire. They can also figure out which wire coming out of the wall is line and which is load.
How do I wire a GE Smart switch?
4:356:06Cync Neutral Wire (4-Wire) Smart Switch: How to Install for 3-WayYouTubeStart of suggested clipEnd of suggested clipOn the line side instead of capping the second traveler wire connect it to the neutral wiresMoreOn the line side instead of capping the second traveler wire connect it to the neutral wires associated with that circuit group together with the neutral wire of the sync smart switch.
How do I reset my GE smart switch?
Reset to factory default Quickly press ON (up) 3 times then immediately press the OFF (Down) button 3 times. Note: This should only be used in the event your networks primary controller is missing or otherwise inoperable.
How do you wire a GE Smart 3 way switch?
6:278:3612723: GE Add-on Switch (3-Way Install) - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow take the remaining wire the red one in this case and insert it into the traveler. Terminal. NowMoreNow take the remaining wire the red one in this case and insert it into the traveler. Terminal. Now that both switches are wired you can push them into the box be careful not to pinch any of the.
How do you program a GE Z Wave smart switch?
0:523:00How to Re Pair a GE Smart Light Switch to a new hub by Samsung ...YouTubeStart of suggested clipEnd of suggested clipUp here at the top of the screen are the three dots press that select z-wave utilities now select z-MoreUp here at the top of the screen are the three dots press that select z-wave utilities now select z-wave exclusion. And it's in the exclusion. Scenario press the UP button on the switch.
What is a GE add on switch?
The GE Add-On switch is an interesting product. This switch offers all of the same smart features as your standard GE smart switch, but doesn’t work on its own.
How does an add on switch work?
The add-on switch works by mirroring the controls of the switch that you connected to. If you connect it to a GE smart dimmer switch, your add-on switch will now become a smart dimmer switch that controls the same lights.
Why use a GE garage light switch?
You’re either stuck walking across a dark garage as you head for the door that leads back into your home or you’re stuck in a dark garage heading out for the garage door. Using a GE Add-On Switch is a great way to eliminate ever having to stumble around in a dark room.
Does smart switch control light bulb?
By adding the smart technology in at the level of the switch, it doesn’t matter what type of lighting you have plugged in at the other end. You control the switch directly rather than the light bulb itself. This gives you much more diverse options when it comes to controlling your home’s smart ecosystem.
Can you use an add-on switch on a smart home?
We can definitely see add-on switches becoming one of the new go-to products for smart homes across the country. However, if you’re content to use your apps on your smartphone to control your lighting, you might not find add-on switches all that useful.
Where is the light switch in a room?
It’s very common for there to be a light switch at the entrance and exit of a room that controls the same light. This can be seen in living rooms, kitchens, and even larger bedrooms. That secondary switch can get upgraded with a GE Add-On Switch.
Can you use LED light bulbs after installing a smart switch?
Here’s an extra tip. The smart switch might cost a little more upfront than a smart light bulb, but you could use standard LED light bulbs after installing your smart switch. This can wind up saving you money in the long run.
Product Description
Expand your control with the GE-branded In-Wall Add-on Switch. When paired with a GE-branded smart switch or dimmer, including Z-Wave, Zigbee and Bluetooth controls, the hardwired device completes multi-switch systems. Wirelessly operate and schedule indoor or outdoor fixtures from up to five locations for effortless management of your home.
Important information
There was a problem filtering reviews right now. Please try again later.
What is a GE Enbrighten switch?
Expand your control with the GE Enbrighten Add-On Switch with QuickFit™ and SimpleWire™. When paired with a GE-branded smart switch or dimmer, including Z-Wave and ZigBee controls, the hardwired device completes multi-switch systems. Wirelessly operate and schedule up to 6-way configurations of indoor or outdoor fixtures for effortless management of your home. Automation possibilities are seemingly infinite when connected to hubs from Ring, Wink, SmartThings, HomeSeer, Vera, Nexia and more.
What is simplewire switch?
With the SimpleWire technology, the new add-on switch features dual offset ground ports, which save time, simplify installation and reduce wire congestion in multi-switch setups. Neutral wire required.
What is Quickfit enhancement?
QuickFit enhancements are the ideal solution for older-style switch boxes, multi-gang configurations or any other application with limited space.
Is a multi switch a standalone device?
Multi-switch operation – The switch is not a standalone device. It must be used with a GE-branded smart control for Z-Wave, Zigbee or Bluetooth home automation. The smart switch or dimmer and as many as four add-on switches can be linked for up to 6-way operation.
