Does a fireplace heat the House?
Wood burning fireplaces may be able to heat a room, but not by a significant amount. Open fireplaces can be as little as 10% efficient meaning that much of the heat is lost out of the chimney. An open fireplace by itself is unlikely to be able to warm a whole house, and in some circumstances may even make a house colder when used.
What are the different parts of a fireplace?
The Parts of a Fireplace
- The Hearth. When you first observe a fireplace, your eye is often typically drawn to the firebox where the physical flames exist.
- Fireplace Surround. ...
- Fireplace Face. ...
- Back Panel. ...
- The Mantel. ...
- The Firebox. ...
- Lintel. ...
- Fireplace Liners. ...
- Ash Pit. ...
- Glass Doors. ...
What are the measurements of a fireplace?
What are the dimensions of these fireplaces?
- Masonry fireplace dimensions: Masonry fireplaces typically have a dimension of 24 to 48 inches but they can reach 84 inches for homes with tall walls.
- Gas fireplace dimensions: The width of this fireplace can be 24 to 48 inches. ...
- Electric fireplace dimensions: These fireplaces are very unique and they take the space of conventional wood fireplaces. ...
How do you set up a gas fireplace?
- Applying pipe thread sealant around the gas line connection on the burner.
- Attach the gas supply line to the burner.
- Fasten the connection tightly using a wrench.
Are Heatilator fireplaces good?
Builders install Heatilator fireplaces because they know it's the best fireplace brand, assuring their customers many years of comfort and reliability at a reasonable price. For this reason, Heatilator is often referred to as “the first name in fireplaces.”
How does Heatilator fireplace work?
Heatilator is a brand name (and the household name) for what can be more generically called a heat-circulating fireplace. Heatilator fireplaces work by circulating air around a firebox and back into the room, so that the warmth of the fire will be dispersed throughout the home.
Are Heatilator fireplaces vented?
With Direct Vent fireplaces and inserts, 100% of combustion exhaust and fumes are removed from your home. These sealed fireplaces provide optimal heat, conserve energy and ensure clean, safe indoor air quality.
How do you ignite a Heatilator fireplace?
1:172:50Relighting Your Heatilator® Standing Pilot Fireplace Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo to do that you press in and rotate it over to the hash mark. And then hit the igniter. SeveralMoreSo to do that you press in and rotate it over to the hash mark. And then hit the igniter. Several times. The pilot light will turn on keep holding the knob down for about thirty seconds.
Can you burn wood in a Heatilator fireplace?
An example is the Heatilator Constitution wood-burning fireplace. This attractive clean-burning unit can provide heat for up to 10 hours on just one full load of wood.
Can a Heatilator gas fireplace work without electricity?
Fireplaces with a standing pilot can be manually lit to activate the pilot and flames. Many Heatilator gas fireplaces have IntelliFire™ intermittent pilot ignition systems with battery backup systems for lighting the pilot and flames during power outages.
Does a Heatilator have a damper?
A damper clamp will come standard with your gas log set and MUST be installed to maintain a small opening at all times. This allows for the escape of any pilot exhaust.
Does a Heatilator have a fan?
Blower - Old-Style Heatilator Fireplaces utilize a blower to circulate warm air throughout the room. A blower increases fireplace efficiency by evenly distributing warm air throughout the home which maximizes the performance of your fireplace thereby ensuring that it increases the amount of heat it gives off.
How much gas does a Heatilator use?
32 cents per hour* to operate. So, enjoying a fire for an entire evening can cost as little as $2. That's a small price to pay for the ambience and warmth that will fill your home.
How do I turn on my Heatilator fireplace without power?
1:122:07Using Your Heatilator® Gas Fireplace During A Power Outage VideoYouTubeStart of suggested clipEnd of suggested clipAnd switch it from remote watchers to the on position and your fireplace will turn on to turn theMoreAnd switch it from remote watchers to the on position and your fireplace will turn on to turn the room fireplace off you simply switch it all the way to the right to the opposition.
How do I turn off my Heatilator fireplace?
0:281:15How to Shut Off Gas Fireplace with Standing Pilot - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt turn up to the pilot. Position you press it in a little bit and you can go ahead and turn that toMoreIt turn up to the pilot. Position you press it in a little bit and you can go ahead and turn that to the off position that shuts the gas off to the entire fireplace.
What if pilot light goes out on gas fireplace?
If the pilot light of an appliance goes out, turn off the gas at the appliance for several minutes before attempting to re-light it. Instructions should be attached to the appliance.
How do you manually turn on a Heatilator fireplace?
1:122:07Using Your Heatilator® Gas Fireplace During A Power Outage VideoYouTubeStart of suggested clipEnd of suggested clipAnd switch it from remote watchers to the on position and your fireplace will turn on to turn theMoreAnd switch it from remote watchers to the on position and your fireplace will turn on to turn the room fireplace off you simply switch it all the way to the right to the opposition.
Does a Heatilator have a damper?
A damper clamp will come standard with your gas log set and MUST be installed to maintain a small opening at all times. This allows for the escape of any pilot exhaust.
How do I operate my fireplace?
Step-by-Step Directions on How To Use a FireplacePut Safety First. ... Other steps in safety include: ... Open the Damper. ... Use Only Seasoned Firewood & Kindling. ... Build an Upside-Down Fire. ... Prime the Flue, If Necessary. ... Contact Burlington Fireplace & Solar.
What does the lever on the side of the fireplace do?
Also, some wood burning fireplaces have a lever to open or close the outside air vent to the fireplace. If your fireplace has this lever (usually located on the left inside panel) make sure the outside air vent is in the open (or up) position. The outside air kit is designed to provide additional air for combustion.
Why is a chimney important?
The chimney keeps the flue heat and prevents the contact of heat with other flammable materials. It also helps to eliminate the toxic fume and smoke out of the house.
How does a blower work?
The blower helps to circulate the warm air in the room. The fan motor and baffles of the blower help to do the job smoothly. The fan pulls cold air, warm it up within the baffles. After that, the air blows out of the room.
Why do fireplaces have grates?
Many fireplaces come with a grate that facilitates fire build up above the hearth. You can place the grate in your living room. It will help to air supply and hold the fuel in its place.
How long does it take for a blower to turn on?
It takes around 10-20 minutes to turn on and off or to complete the process once. It can not turn on and then turn off instantly. The blower needs at least 10 minutes to do the job.
What is the hearth part of a fireplace made of?
Hearth: The core part is made of fireproof materials like bricks. It is basically the outer shape that holds the other parts of a fireplace.
What controls airflow to the fireplace?
4. The Air Vents Control Airflow to the Fireplace:
What is the opening of a fireplace?
The fireplace opening let the user light the fire. You can build a fire from here and the fire will produce heat. The opening of the fireplace also will allow the radiation of heat through the house. The area where you build a fire is known as a hearth. It is made of non-combustible material to resist heat. It also prevents the ashes and embers from entering the room.
What is a heatilator gas fireplace?
Heatilator gas fireplaces are designed to add style and efficient heating to any living space – both indoors and outdoors.
Why are outdoor fireplaces so popular?
Outdoor fireplaces are soaring in popularity as we connect more closely to nature and expand our living spaces. Create a fun yet functional area for family members and guests to enjoy with an ambiance only a live fire can provide.
What is a front facing fireplace?
Conventional, front-facing fireplaces now offer a wide variety of surrounds and interiors to match your décor. Enjoy instant warmth and comfort, while crisp, clean styling makes your fireplace inviting whether it’s burning or not.
Does the MSRP include accessories?
Starting at price is MSRP for base model with required components. Pricing does not include optional accessories, delivery & installation, venting and taxes, if applicable. Other charges may apply. Pricing subject to change. See your local dealer for exact pricing.
Pilot Ignition Problems on a Heatilator Gas Fireplace
The first thing to check when your pilot ignition does not start, is to check the ignition module. Make sure the module is plugged in and turned on. The module is plugged in & also turned on, the culprit might be a faulty ignition module or the spark igniter.
How To Replace A Gas Supply Pipe?
Turn the knob on the gas cylinder to completely shut off the gas supply.
Fixing Low Gas Pressure
Check to see if you’re using the right gas type required by your model of Heatilator gas fireplace.
Electronic Malfunction on the Heatilator Gas Fireplace
Heatilator gas fireplaces always come with a control to adjust the fan. When the control cannot adjust the fan speed, it is most certainly an issue of a broken rheostat.
Heatilator Soot Problems
In cases of improper airflow caused by a dirty chimney or a clogged burner, your fireplace may generate excess soot.
Summary
Fireplaces built by Heatilator are of pristine quality and of good reputation. But that isn’t any guarantee that they won’t run into problems. Heatilator gas fireplace troubleshooting is a must know skill for any user in case he might run into a problem with his fireplace.
