The Kindling Cracker Brand
- A School Project. The Kindling Cracker firewood splitter was invented by a young inventor Ayla Hutchinson from New Zealand.
- The Price Point. The Kindling Cracker was at the time a unique product, but nowadays there are some similar kindling tools on the market.
- Buying the Kindling Cracker. ...
Full Answer
Is it better to have a kindling Cracker attached to cast iron?
It is better if the Kindling Cracker is attached do something shock-absorbent like a stump for better work efficiency. As cast iron is brittle, won’t the Kindling Cracker break if accidentally hit ?
What is kindling and how does it work?
Kindling is material used within the construction of fires and typically consists of many smaller bits to help a fire catch alight more easily. Kindling is often placed below the logs when starting a fire but may be located above when using the top-down method for starting fires.
How did the kindling Cracker become an award winner?
Through this Kindling Cracker review, you learn that what had started out as a science fair project by a young student, who wanted to create something that could split wood into kindling without any injuries, has now become a permanent award winner and is internationally reclaimed.
What are kindling Splitters made of?
Material: Kindling splitters are made from either steel or cast iron. Some of the latter are quite decorative in design. The most basic models are made of a simple upright sheet of steel welded at a right angle to a stand. Blade: The blade doesn’t have to be razor sharp to be effective because the applied force splits the wood grain quite easily.
How does a kindling cracker work?
The Kindling Cracker™ firewood splitter is made of solid cast iron in Australia, the splitting wedge is set inside the patented safety ring (170mm inside diameter), never allowing your fingers near the blade. To split a piece of wood, place it inside of the frame and strike it with a 3-4lb.
Does the kindling cracker rust?
We recommend that it does not sit on your carpet especially if you have used it outdoors as there may be dirt or moisture on the base, and yes being made out of cast iron they can get a surface rust over time if left outside but they can be re-painted if you like.
Where is the kindling cracker made?
Australian foundryThe Kindling Cracker is made in an Australian foundry. It consists of one solid piece of high-quality cast iron, so it's something that your grandkids' grandkids will use to split their own kindling, if cared for and used correctly.
How do you mount a kindling cracker?
0:388:47KINDLING CRACKER FIREWOOD KINDLING SPLITTER - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll right so before you even get started I want to say this is very sharp right here so that doesn'tMoreAll right so before you even get started I want to say this is very sharp right here so that doesn't need to be touched up at all. And down here some notches so if you want to attach a screw to it.
What is the best kindling for a fire?
Sticks, twigs, and dried leaves Loose bits of wood make good tinder – no surprises there. Gathering together a pile of small sticks, twigs, and dried leaves will give you a good base to build a fire. To make sure your kindling takes, ensure the sticks, twigs, and leaves you gather are smaller and easier to light.
What is the best kindling machine?
5 Best Kindling Splitters (Technical Data)ModelBase dim.Max. log diameterKindling Cracker 'KING'230x230 mm 9" x 9"200 8"LIttle Joe Kindling Splitter300 x 254 mm 12" x 10"180 7"Kindle Log Splitter260 mm 10.25"200 8"Stikkan Softwood Kindling Splitter140 x 89 mm 5.5" x 3.5"/1 more row•Feb 2, 2021
Who invented kindling cracker?
Ayla HutchinsonThis is Ayla Hutchinson from New Zealand - the young inventor behind the Kindling Cracker™. Ayla was 13 years old when she invented the patented firewood splitter. Ayla created the invention after her mother injured her finger while using an axe.
What is wood Kindle?
The small pieces of wood you use to start a fire are called kindling. When you go camping, you can gather kindling, little twigs and branches, to use in a campfire. Kindling helps a fire get going because it's small and dry, easily flammable.
Can a log splitter make kindling?
Using a manual log splitter The manual splitter comes complete with the ultimate splitting base blade which is the perfect tool for splitting wood kindling and knotty logs.
How do you make a kindling splitter?
0:076:31How to Make a DIY Kindling Splitter from Rebar - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt. So I cut up a piece of rebar. I got two pieces at one foot four pieces at eight inches. And thenMoreIt. So I cut up a piece of rebar. I got two pieces at one foot four pieces at eight inches. And then four pieces that will make up the difference to make a square which is at about a 7.
How do you use a wood splitter?
1:032:09How to Use Hydraulic Log Splitters | The Home Depot - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you stack each split log as you go go avoid cluttering your work area. And be sure to stack theMoreIf you stack each split log as you go go avoid cluttering your work area. And be sure to stack the wood off the ground and keep it covered.
How much is a log splitter?
Log splitters, on average, cost about $1,000. The smaller manual log splitters can cost as little as $70 and up to $200 for the manual hydraulic splitters. The mid-range electric log splitters cost between $350 and $850. And the bigger, more powerful gas-powered log splitters can cost between $1,000 and $7,500.
Step 1: Materials and Tools
There is a variety of materials you can use to make this. I have seen someone use rebar, pipe and other metal objects. I happened to have 1in square tubing laying around along with some scrap flat and angle iron.
Step 2: Design
You can modify the measurements to fit your needs, I decided to go a little bigger than what could be purchased in stores.
Step 3: Cut and Tack!
Pretty simple, I cut 8 sections of square tubing with 45 degree angles on them 10 inches in length to the long sides. I didn't think to take pictures as I wasn't going to make this at first but decided it would be a fun project to share.
Step 4: Partial Assembly
I don't believe it is necessary but at this time I gave the 2 newly welded square frames time to cool to prevent warping. Next we will find the center points on 2 sides of the squares and tack down the vertical supports to the top and bottom. Once tacked and cleaned proceed to finish welding the joins.
Step 5: Make the Blade!
Here is where heavy gloves and a face shield, not just glasses, will be your best friend! We now need to make a blade to split the logs. Take the 1/4 in flat bar and grind a sharp side to it. you can use anything you want either a bench grinder or grinding disc on a hand held once, whatever is easier. I used a bench grinder.
Step 6: Final Assembly and Testing!
Find a good place to mount the blade based on your dimensions (assuming you made yours a different size). I just eyed it a little higher than the center point on the vertical supports.
Step 7: Paint and Done!
I recommend giving this a good heavy coat of paint as welding slag will rust quickly.
Design and features
Kindling Cracker is designed in New Zealand and made in Australia. It is built with cast iron. The wedge is encompassed by rings on top and bottom, and 12-inch frames on each side. The diameter of the top ring is 6.5 inches. This means that the maximum log diameter supported by Kindling Cracker is 6.5 inches.
Performance
You can make a decent amount of nice little kindling with this tool. In about 2 minutes, we could easily make 24 kindling (from Oak logs) that were 1-inch wide and 12-inch long. It was safer much easier than swinging an axe to make those kindling. It didn’t make much noise either. You can comfortably use it in your backyard.
Conclusion
We were very satisfied with this intuitively designed kindling splitter. Kindling Cracker is not only safer than using an axe or a log splitter to make kindling, but it is easier and more effective. We highly recommend it for firewood kindling splitting. To learn more about this splitter you might want to visit the manufacturer website.
Compact and portable
The best kindling splitter weighs just 10 pounds and is small enough to carry wherever you need to split wood into kindling. As it’s compact, it’s mainly useful for cutting smaller logs and not much intended for full-on log splitting. It thus makes a great addition to your list of camping supplies.
Durable but safe
This manual log splitter is of high-quality cast iron and lightweight, but durable. It’s produced in an Australian foundry, and if maintained well, will sustain for generations. As there’s no need of using any hatchet or splitting axe to split wood, it’s safe enough for even children to cut wood.
Can be screwed down for stability
As the kindling wood splitter device is lightweight, you may need to screw it down onto a stump for additional security. This is why it has four bolt holes on its base which for the permanent mounting of the splitting wedge.
Not meant for big sized wood
There is one drawback and in fact, the only complaint of this splitter, which is that since its mouth has a radius of only 6.5”, it’s not possible to use it to split large to averagely sized logs.
Minimum maintenance
There is no extensive maintenance ritual to follow with the firewood Kindling splitter. It just needs an occasional brushing to get rid of any settled dust and a periodical coat of paint to prolong its life.
Nothing complicated
All you need to do to split wood using the Kindling Cracker is to place the wood to be split inside the splitter’s safety ring. Then hit it with any blunt instrument like a hammer or even a wood piece. You can hit with much less force than you’d use to swing a maul or axe.
