How does a Sanivite work?
The inside of the Sanivite is comprised of a pressure chamber, which starts and stops the unit, and the motor, which drives the pump. When the water enters the Sanivite, it activates a micro switch in the pressure chamber, which in turn starts the motor. The motor is sealed for life in an oil filled enclosure.
How do I install Sanivite?
0:5313:19Saniflo Sanivite Drain Pump, Unboxing and Review - YouTubeYouTubeStart of suggested clipEnd of suggested clipHas a check valve built into it already. So you don't need to have an extra check valve up topMoreHas a check valve built into it already. So you don't need to have an extra check valve up top really screw things over but you can do it half. You can do two inch it's a nice little plug.
How do I fix Sanivite 3?
On a regular basis (every three to six months), switch off the unit and then pour about 9 pints of hot water into your sink and mix in some bleach or vinegar or wasing soda (soda crystals). Let this run into the Sanivite and sit there for a while.
What is a Sanivite?
Sanivite is a powerful pump with four inlets for connection to sinks or appliances. Waste water is pumped through 32mm small-bore pipework, vertically up to 5 metres or horizontally up to 50 metres or a lesser combination of both.
How far can a saniflo pump?
The unit pumps the effluent upward to 15 feet and/or 150 feet horizontally (with gravity fall).
How do you empty a saniflo?
Firstly, switch off the Saniflo. For now, you may need to remove some of the waste by hand, especially if the waste threatens to overflow. Next, take some hot towels and place them along the length of your waste pipe. This should loosen up the frozen blockage and allow you to flush out the waste.
Can you poop in a Saniflo toilet?
The simple answer is that yes you can poop in a Saniflo toilet. As with normal toilet systems you can put any organic waste into the toilet bowl and use the flush mechanism to remove it—which includes toilet paper—although like a standard toilet too much toilet paper can lead to blockages occurring.
What is the lifespan of a Saniflo?
10 to 15 yearsThe lifetime of a Saniflo depends mainly on proper installation and proper use. However, devices typically have a lifetime of 10 to 15 years with minimal maintenance, i.e. cleaning-descaling annually, and, depending on the quality of the water in your region, the replacement of the pressure switch membrane.
How much does a Saniflo service cost?
We charge a fixed price of £107.50+vat for a standard Saniflo repair. Our standard fixed price repair will cure noisy units, free any jams and blockages within the unit, fix minor electrical faults or leaks & overflows.
Can you run a washing machine through a Saniflo?
If your Saniflo system is connected to a washing machine or dishwasher, steer clear of using the 90 degree hot wash cycle. This can cause the motor to overheat and cut out mid-cycle while emptying. Once it has cooled down, the motor will restart. However, it's best to avoid using hot wash cycles where possible.
Why does my Saniflo toilet smell?
Why does my Saniflo smell? Bad smells can be due to a build-up of limescale and human waste in the 2-3 inches of water that's always left in the Saniflo. To see if it's your Sanilfo that's emitting the bad smell, flush your toilet or fill your basin with water and then unplug it.
How does a GREY water pump work?
When the water level in the tank rises, the pump automatically turns on by way of the vertical float switch. It pumps the water out via the discharge outlet in the tank wall to wherever you want the grey water to go, such as the septic system, rhelm drain, or sewage line (even if that point is uphill from the tank).
How do you install a Saniswift pump?
3:2210:15How to install a Saniflo - YouTubeYouTubeStart of suggested clipEnd of suggested clipAlways run any horizontal discharge pipe on a minimum. 1 in 100. Fall. This may involve taking upMoreAlways run any horizontal discharge pipe on a minimum. 1 in 100. Fall. This may involve taking up floorboards and notching into the joists or fixing the pipe on a fall along the joist.
Where is the microswitch on a saniflo?
This micro switch is located in the pressure chamber inside your macerator unit.
Can you run a washing machine through a saniflo?
If your Saniflo system is connected to a washing machine or dishwasher, steer clear of using the 90 degree hot wash cycle. This can cause the motor to overheat and cut out mid-cycle while emptying. Once it has cooled down, the motor will restart. However, it's best to avoid using hot wash cycles where possible.
What is a Saniflo toilet?
Saniflo is an innovative, inexpensive and painless method to make installing a bathroom as easy as pie. The Saniflo upflush system is unlike other traditional systems on the market. Instead of laying pipework under the floor, attaching it to the main drain line – the Saniflo upflush pump does all the work for you.
What is a Sanivite drain pump?
The Sanivite model was designed to sustain the toughest applications meant for drain pumps. Its pumping capabilities and unique design are the reason why these range of pumps are preferred for heavy duty applications.
How does a Sanivite motor work?
When the water enters the Sanivite, it activates a micro switch in the pressure chamber, which in turn starts the motor. The motor is sealed for life in an oil filled enclosure. A spindle/shaft drives the impeller and therefore the moving parts are kept to an absolute minimum.
Can a Sanivite washer take gray water?
The Sanivite can also accept gray water from a washing machine through an indirect connection such as a laundry sink.
Can a Sanivite drain pump be connected to a GFI?
It is also highly recommended for the drain pump to be connected to a Ground Fault Interrupter (GFI) circuit. The Sanivite is small enough to fit comfortably inside a kitchen cabinet or vanity or inside the overhang of a whirlpool. The Sanivite has been certified to American and Canadian Standards.
Why switch off sanivites?
If you have multiple Sanivites sharing the outflow pipework then switch them off as well to prevent them pumping water back down the pipe to the unit you're working on.
What is a sanishower?
The Sanishower is a differently-arranged and smaller unit with only two inlets, but has some parts in common with the Sanivite and so this page may help. If you are only trying to deal with a smell or noise, or just want to thoroughly clean a Sanivite 3, then start with the section "And in future...". below.
How to undo Jubilee clips?
Now undo the Jubilee clips (28, 30, 30c) and / or plastic clips (30a, 30b) on the various connections. The plastic clips (if yours has that sort) can be released by pushing the two ends apart sideways with pliers, etc. If these break you can replace them with the same size in Jubilee clips - available at most hardware stores.
Does YouTube cover Sanivite?
YouTube only seemed to cover installation of the Sanivite when I last looked, but this guide to the "Haushaltspumpe" does include a cut-away view of the Sanivite at the start.
What is a Sanivite drain pump?
The Sanivite model was designed to sustain the toughest applications meant for drain pumps. Its pumping capabilities and unique design are the reason why these range of pumps are preferred for heavy duty applications.
How does a Sanivite motor work?
When the water enters the Sanivite, it activates a micro switch in the pressure chamber, which in turn starts the motor. The motor is sealed for life in an oil filled enclosure. A spindle/shaft drives the impeller and therefore the moving parts are kept to an absolute minimum.
Can a Sanivite washer take gray water?
The Sanivite can also accept gray water from a washing machine through an indirect connection such as a laundry sink.
Can a Sanivite drain pump be connected to a GFI?
It is also highly recommended for the drain pump to be connected to a Ground Fault Interrupter (GFI) circuit. The Sanivite is small enough to fit comfortably inside a kitchen cabinet or vanity or inside the overhang of a whirlpool. The Sanivite has been certified to American and Canadian Standards.
