Full Answer
What is a fillet in a handrail?
Fillet is decorative wood strips used to fill the plow between balusters in plowed handrail and shoerail.
What is a shoe railing?
Shoe rail is used for mounting balusters especially on the rake of a knee wall. This product is available in unplowed, 1 3/4″, 1 1/4″ or 1″ plow to accommodate all balusters. Shoe rail is simple and easy to install and use.
What is a stair railing fillet?
Fillets are the long wood strips to fill the handrail or shoerail plows.
What is a plowed shoe rail?
Plowed Shoerail Shoerail is used to secure the bottom of your balusters to the floor or rake of the stairs. A shoerail may need a plow if it is accommodating square-based wood balusters, so that the baluster can sit down into the shoerail itself.
What is a shoe plate on stairs?
Shoe plates, also called shoe rails or landing tread, are the horizontal piece that sits on the floor into which the balusters and posts are attached. They are often the linear continuation of the false tread caps running up the sides of a staircase.
What is a shoe glass?
Glass Shoe — also known as Glass Railing Base Shoe or Glass Shoe Moulding — is the primary structural element of a glass railing system. When properly installed and specified, a glass base shoe will hold the structural glass in place allowing a great view yet providing a safe guard.
How far apart are spindles supposed to be?
4-inchU.S. building codes mandate that balusters have no more than a 4-inch gap between them. This relatively tight amount of spacing still allows for visibility between spindles, but also stands as a safety measure to prevent small children from becoming stuck between spindles or from slipping through the balusters.
How do you attach handrails to balusters?
3:024:28Installing Stair Rails - Menards - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen in the hand rail drill a pilot hole for the bolt. And a larger hole for the nut. Apply glue andMoreThen in the hand rail drill a pilot hole for the bolt. And a larger hole for the nut. Apply glue and slide the rail onto the bolt. And tighten the nut attach the handrail at the top with finishing.
How do you fit a spindle on a banister?
0:265:34Stair Baluster Installation with Wooden Spindles - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis spindle installation uses shoe rail on the bottom of the spindles. And a handrail with aMoreThis spindle installation uses shoe rail on the bottom of the spindles. And a handrail with a channel underneath. The spindles are spaced apart with Filat strips that fill the gap in the shoe rail.
What is the groove for on a handrail?
The grooved handrail eliminates the need for any metal brackets to connect the glass panels to the handrail.
What type of handrail is made with a channel removed from the bottom?
Plowed HandrailWhat is a plowed handrail? This is a frequently asked question regarding stair parts and stair installation. The answer is simple; many wood handrails are manufactured with a channel removed on the bottom side.
How do you attach balusters to floor?
Cut the balusters 1/2-inch longer than the length of the baluster as above. Next, push the top of the baluster up into the hole in the bottom of the rail. Then place glue in the hole in the tread and pull the baluster down, placing the dowel on the bottom of the baluster firmly into the hole.
Do balusters need shoes?
Square Baluster Installation Tips This requires drilling a round hole and using a shoe to hide the left over gaps. It has the easiest difficulty, saves the most time and when time is considered is the most cost effective option.
How do you attach iron balusters to shoes?
Installing iron shoes is simple: apply glue to the base of your iron balusters, slide the iron shoes onto the baluster, and then press shoes into place.
Finishing Information
Select the same species and finish as the rest of your stair components in order to achieve a cohesive look. Select the same Finish to receive Fillets treated with a Pre-catalyzed Lacquer to protect it against the natural oils from skin.
Wood Grain & Color Variation
At StairSupplies™ we believe that natural wood colors and visual textures add character to our products. With that in mind, we strive to match the grain and color of all of our wood products as closely as possible.
Interior Use Only
This product may contain glue joints and is designed for interior use only.
