A soil pipe cutter is a tool used to cut through concrete or clay-based pipelines, usually in preparation for laying new utility lines or lateral piping. They are used by plumbers and other professionals who work with pipes. They can be used during underground pipe installation on new construction to carry sewage and wastewater.
Full Answer
How to cut soil pipe?
Cutting Soil Pipe with a Reciprocating Saw. A reciprocating saw with a diamond blade can get the job done with a clean cut, but don’t schedule an early tee time. Reciprocating saws cut slowly, and these blades are expensive. More recently, advances in carbide tooth manufacturing methods have yielded some excellent products. They typically don ...
How to use a pipe cutter?
How to Use PVC Pipe Cutter
- Purchase and Install PVC Pipes and Accessories. To ensure the success of your project, you should purchase the appropriate PVC piping before starting.
- Measuring and Marking Lengths. Make sure all sections of your PVC pipe project fit together properly by measuring and building in segments.
- Cutting PVC Pipe. ...
- Attach the Segments to the Pipe. ...
What do you use to cut PVC pipe?
- Tie metal rings onto both ends of the cotton string.
- Wrap the cotton string halfway around your PVC pipe, and teeter-totter the ends back and forth in a sawing motion.
- You can also loop a piece of butcher's twine, or kite string, all the way around the PVC pipe.
- Pull the string back and forth like a seesaw.
How to cut a PVC pipe?
- Mark your cutting lines.
- Lubricate the lines.
- Place the pipe in the miter box or on a stable surface.
- Slowly mark the cutting line with the saw.
- Saw back and forth until you’ve cut through the pipe.
What are soil pipe cutters used for?
Designed to cut soil pipes quickly and easily, the RIDGID 32900 Soil Pipe Cutter has a large chain ideal for heavy-duty jobs. The versatile chain pipe cutter cuts cast-iron soil pipe as well as concrete and clay pipe.
What are the two types of pipe cutters?
There are two types of pipe cutters. Plastic tubing cutters, which really look much like a pair of pruning shears, may be used for thinner pipes and tubes, such as sprinkler pipe. For use on thicker pipes, there is a pipecutter with a sharp wheel and adjustable jaw grips.
What is the difference between a pipe cutter and a tubing cutter?
Tube cutters are typically designed for soft materials like PVC. Pipe cutters, on the other hand, are designed for hard materials like copper, iron and steel. Tube cutters also use a different method of operation than pipe cutters.
What do you mean by pipe cutter?
Definition of pipe cutter : a tool or machine for cutting pipe specifically : a hand tool comprising a grasping device and three sharp-edged wheels forced inward by screw pressure that cut into the pipe as the tool is rotated.
What does a pipe cutter look like?
A wheeled pipe cutter (also called tubing cutter) looks similar to the letter “C” with a handle or knob extending from the side. Wheeled pipe cutters are used to cut pipes made from copper, brass, plastic and thin-walled electrical metal tubing (EMT).
How do pipe cutters work?
A pipe cutter works using a sharp cutting wheel to slowly penetrate through the metal and sever it. As the pipe cutter is rotated around the pipe in a 360°circle, the cutting wheel cuts through the pipe. With each rotation, the wheel penetrates through more of the pipe.
Will a pipe cutter cut PVC?
Using a PVC pipe cutter (such as this Ridgid ratcheting PVC cutter available on Amazon, good for up to 1⅝-inch pipe)—which looks like a pair of pliers with a very sharp, thick blade fitted on one side—is by far the quickest, most convenient way to cleanly cut PVC pipe.
When a pipe cutter is used instead of a hacksaw for cutting pipes?
Question 6 of 6: When should you use a pipe cutter instead of a hacksaw? Use a pipe cutter when you need a smooth surface. The pipe cutter leaves behind a smooth, mostly burr-free cut.
Will a pipe cutter cut steel?
Pipe cutters are a simple hand-held tool that easily cuts through steel, copper, bronze and aluminium tube sections.
What are safety precautions in using pipe cutter?
Always wear suitable eye protection when using the Pipe Cutter to prevent sewage, chemicals or dust from irritating your eyes. Always wear suitable ear protection when using the Pipe Cutter to prevent any hearing loss. Always wear suitable cut-resistant gloves when using the Pipe Cutter to pre- vent any hand injuries.
When was the pipe cutter invented?
February 19, 1918.
What are pipe cutter blades made of?
What are pipe cutter wheels made of? Pipe cutters have a single wheel blade that cuts the metal piping when the cutter is turned. The wheel is usually made from hardened steel.
What are the different types of pipe cutters?
Pipe and Tube Cutter Type:Chain / Soil Pipe Cutter.Close Quarters Cutter.Cutting Wheel.Enclosed Feed Cutter.Ratchet Cutter.
Which types of pipes can be cut easily by pipe cutter?
DIY plumbing projects can be made much easier by using the correct pipe cutter....While these tools are known as copper tubing cutters, they can work for a variety of pipe materials:Rigid copper plumbing pipe.Flexible copper tubing.PVC plastic.ABS plastic.CPVC plastic.EMT (Electrical Metal Tubing)
What is copper pipe cutter?
Copper pipe cutters make the job of cutting different diameters of pipe as simple as possible. Cutters are designed to help plumbers deal with new work or repair leaking pipes that need to be cut with precision, or bent into being workable.
What is pipe reamer?
Pipe Reamers are used to deburr steel pipe before threading. The pipe reaming cone is made from tool steel and hardened for maximum life. Unique cutting edge makes this spiral pipe reamer self-feeding and easy to start and operate.
What materials can a pipe cutter cut?
Pipe cutters are specialized in cutting many different pipe materials. These materials include:
What are the different types of pipe cutters?
Pipe cutters can be classified into 4 main groups and are designed to cut different types of plumbing pipes:
What are the advantages of using a pipe cutter?
Pipe cutters have some advantages to them. The main advantage is that that they can provide a cleaner cut to a pipe than a hacksaw would. This advantage means less deburring is required, thus minimizing the overall effort needed to complete a project.
What is a pipe cutter?
Pipe cutters are used for cutting pipes to ensure the correct pipe length for an installation. They are also used in situations where damaged sections of a pipe need to be removed and replaced.
How do pipe cutters work?
How does a pipe cutter work? 1 Wheel pipe cutters are cutters are round, and contain a wheel that acts as a blade. As the pipe cutter rotates around the pipe, the wheel begins to cut the pipe. 2 Ratcheting pipe cutters have a ratcheting function that allows you to adjust the width between the blades. This function allows you to cut pipes of various sizes. Simply squeeze the handles of the pipe cutter for the pipe to be cut. 3 Inside pipe cutters attach to a power drill and allow you to cut pipes from the inside. Simply power on the power drill to begin cutting the pipe.
Can you cut stainless steel pipes?
Yes, stainless steel pipes can be cut by pipe cutter s. You will need to get a pipe cutter specialized in cutting stainless steel, such as the Ridgid 65S or the Ridgid 35S. Both of these pipe cutters utilize stainless steel cutter wheels, which makes cutting stainless steel pipes relatively easy.
