What is an spec specimen bottle?
specimen bottle- a bottle for holding urine specimens bottle- a glass or plastic vessel used for storing drinks or other liquids; typically cylindrical without handles and with a narrow neck that can be plugged or capped Based on WordNet 3.0, Farlex clipart collection. © 2003-2012 Princeton University, Farlex Inc.
How are the specimens labeled in the lab?
The specimens are clearly labeled with their chronological sequence (1 of 6, 2 of 6, or time drawn) and with the patient's name, other unique identifier, and date of collection.
What are the bottles used for in a blood test?
The bottles can be used for other non-blood fluids too, for example, pleural aspirates, ascitic taps and CSF samples obtained by lumbar puncture. The tests each bottle is used for are the same: the purple one is for cell count, the yellow one is for electrolytes, albumin and LDH, the grey one is for glucose,...
What information should be included in a specimen collection?
Prior to each collection, review the appropriate test description, including the specimen type indicated, the volume, the procedure, the collection materials, patient preparation, and storage and handling instructions. Preparing the Patient.
What are specimen bottle used for?
Specimen bottle means the bottle that, after being sealed and labeled according to the procedures in this policy, is used to hold the urine specimen during transportation to the laboratory.
What does a specimen jar mean?
Meaning. A specimen jar is used to hold organisms for study.
What is a specimen container?
Specimen collection containers consist of any number, shape and size of container for collecting urine, stool, mucus or other type of bodily fluids. Fluids are typically collected for testing at in-house or outside facilities such as a third-party hospital test site or a sterile testing room.
What are sampling bottles?
[′sam·pliŋ ‚bäd·əl] (engineering) A cylindrical container, usually closed at a chosen depth, to trap a water sample and transport it to the surface without introducing contamination.
How do you make a wet specimen jar?
1:548:14Making Wet Specimens - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd pull out your needle and syringe fill the syringe with formalin. And begin injecting in theMoreAnd pull out your needle and syringe fill the syringe with formalin. And begin injecting in the major areas but ensure you're not injecting. Air it's most important to get Lots in the abdomen.
How do you store specimens?
All specimens should be transported in the relevant fixative. All specimen pots should be tightly sealed and transported using specimen bags, where appropriate. The request card should be placed in the pocket of the specimen bag, and the pot inside the sealed bag to ensure the safety of all staff.
How do you collect a specimen?
There are four steps involved in obtaining a good quality specimen for testing: (1) preparation of the patient, (2) collection of the specimen, (3) processing the specimen, and (4) storing and/or transporting the specimen.
What are the types of specimens?
Other names for (or types of) Type specimen include:Holotype.Lectotype.Neotype.Onomatophore.Paratype.Plesiotype.Syntype.Type.More items...
What are sample bottles made of?
The most common sample bottles are high-density polyethylene (HDPE) or polyethylene terephthalate (PET).
What is the best container for samples?
Paperboard tubes and jars present an eco-friendly packaging choice for samples and travel size products. Paperboard tubes and paperboard jars can provide packaging for sample size cosmetics, lip balm, travel size sunscreen, and more.
What type of containers are used for sampling?
The most commonly used sample containers are plastic or metal containers, glass bottles, metal canisters and plastic bags or boxes (see Table 2). The design of sample containers may vary in different Member States.
What is sterile EDTA?
Sterile, contains EDTA (Ethylene Diamine Tetra Acetate) as the anticoagulant. *MIX WELL!*. Primarily for collection of hematology studies, blood bank procedures and certain chemistries. Sterile, contains sodium citrate (0.109M, 3.2%) solution as the anticoagulant.
Is lithium heparin sterile or sterile?
Sterile, contains lithium heparin as the anticoagulant. *MIX WELL!*. For collection of other miscellaneous studies. Electrolytes, glucose, BUN can be performed more quickly than from a red top; especially useful for patients in DKA. Sterile, contains sodium heparin as the anticoagulant.
Are we missing a good definition for specimen bottle? Don't keep it to yourself..
The ASL fingerspelling provided here is most commonly used for proper names of people and places; it is also used in some languages for concepts for which no sign is available at that moment.
Definitions & Translations
Get instant definitions for any word that hits you anywhere on the web!
What is sequential specimen?
All sequential specimens are from the same patient and are sent to the laboratory at the same time. The specimens are clearly labeled with their chronological sequence (1 of 6, 2 of 6, or time drawn) and with the patient's name, other unique identifier, and date of collection.
How to obtain a good quality specimen for testing?
There are four steps involved in obtaining a good quality specimen for testing: (1) preparation of the patient, (2) collection of the specimen, (3) processing the specimen, and (4) storing and/or transporting the specimen. Since information related to any of these areas may change as clinical laboratory technology changes, ...
What is a timed blood specimen?
There are two types of timed blood specimens: One is for a single blood specimen ordered to be drawn at a specific time. The other is for a test that may require multiple blood specimens to be collected at several specific times.
How many identifiers are needed for a patient's slides?
Verify the patient's identification. Proper identification of specimens is extremely important. All primary specimen containers must be labeled with at least two identifiers at the time of collection. Submitted slides may be labeled with a single identifier, but two identifiers are preferred.
What is the importance of laboratory tests?
Laboratory tests contribute vital information about a patient's health. Correct diagnostic and therapeutic decisions rely, in part, on the accuracy of test results. Adequate patient preparation, specimen collection, and specimen handling are essential prerequisites for accurate test results. The accuracy of test results is dependent on the integrity of specimens.
How long should a gel tube stand before centrifugation?
The gel-barrier tube is an additive tube and should be inverted five to six times after collection. Allow the tube to stand for 30 to 60 minutes for complete clotting to occur prior to centrifugation. Vacuum Tubes Without Anticoagulants.
What are some examples of acceptable identifiers?
Examples of acceptable identifiers include (but are not limited to): patient's name (patient's first and last name exactly as they appear on the test request form), date of birth, hospital number, test request form number, accession number, or unique random number.
What is a blood culture bottle?
Blood culture bottles contain a culture medium to encourage the growth of any bacteria in the blood sample. There are different bottles available with culture media for aerobic ( blue lid) and anaerobic ( purple lid) organisms, alongside a variety of others, including one with a black lid for mycobacterial cultures.
How much blood should be in a blood culture bottle?
They should also be taken before any antibiotics are started. The blood culture bottle should always be the first one you fill, and ideally needs 8-10ml of blood to ensure a good chance of catching any organisms (if using an anaerobic and aerobic bottle, the aerobic bottle should be filled first).
How many times should a grey bottle be inverted?
Tips for use. The grey bottle needs to be inverted about 8 times to mix the sample with the fluoride and oxalate. Only a tiny amount of blood is required for a glucose test, but to assess lactate levels the bottle should ideally contain at least 1ml of blood.
How many times to mix a yellow bottle?
The yellow bottle needs to be inverted about 5 times to mix the sample with the silica and separator. Don’t panic if the blood starts to clot or separate in the bottle, it’s supposed to! The amount of blood required will depend on how many tests you’re doing, but at least 1ml is ideal.
What is a grey bottle used for?
The grey bottle is only used for two tests, so compared to the yellow one it’s fairly easy to remember! It is used for biochemistry tests requiring whole blood for analysis.
What is the purpose of the yellow bottle?
The use of this bottle varies greatly, some hospitals use it for many sensitive tests, including hormones , toxicology, drug levels, bacterial and viral serology and antibodies, whereas others seem to only use it for a few very specific purposes and use the yellow bottle for most things.
Do hospitals have stickers for bottles?
Even though most hospitals now have printable stickers for bottles which tell you which ones to use, it is still vital to have a basic understanding of which bottles are used and why to prevent embarrassing mistakes and/or awkward phone calls from the lab.