What is a tail stock on a lathe machine?
In a Lathe Machine, Tail-stock is a sliding part in X-axis and fitted to opposite of the Head stock of the machine. By using tail stock, we can put centre drill, and drilling of different sizes by using drill bits, which will help to pre boring of internal diameter of the job.
What is a tailstock?
A tailstock, also known as a foot stock, is a device often used as part of an engineering lathe, wood-turning lathe, or used in conjunction with a rotary table on a milling machine.
What is a tailstock clamp used for?
A tailstock, also known as a foot stock, is a device often used as part of an engineering lathe, wood-turning lathe, or used in conjunction with a rotary table on a milling machine. It is usually used to apply support to the longitudinal rotary axis of a workpiece being machined. A clamp that restrains a cow by the neck.
What is a tailstock beam used for?
A beam that supports a bell. A tailstock, also known as a foot stock, is a device often used as part of an engineering lathe, wood-turning lathe, or used in conjunction with a rotary table on a milling machine. It is usually used to apply support to the longitudinal rotary axis of a workpiece being machined.
What is tailstock and headstock?
The headstock supports one end of the workpiece and imparts rotational motion to the work. The tailstock merely supports the other end of the workpiece as it rotates.
What is meant by tailstock?
Definition of tailstock : the adjustable or sliding head of a lathe containing the dead center.
What is the part of tail stock?
Dead tailstocks consist of a housing and quill with a mounting taper (Figure 1). The taper is commonly a Morse taper, but Jarno and Brown & Sharpe tapers are found on some machines. Live tailstocks add a rotating spindle with bearings to the assembly (Figure 2).
What are the three major work of tail stock of a lathe machine?
The tailstock can hold tools for drilling, threading, reaming, or cutting tapers. Additionally, it can support the end of the workpiece using a center and can be adjusted to adapt to different workpiece lengths.
What are the two main purpose of a tail stock?
A Tailstock is particularly useful when the workpiece is relatively long and slender. Failing to use a tailstock can cause "chatter," where the workpiece bends excessively while being cut. It is also used on a lathe to hold drilling or reaming tools for machining a hole in the work piece.
What are the parts of lathe tailstock?
Tailstock ComponentsTailstock.Tailstock Spindle.Tailstock Handwheel.Tailstock Spindle Lock.Tailstock Lock.
What are the 5 major parts of a lathe machine?
What are the Main Components of a Lathe?Headstock: The headstock is usually located on the left side of the lathe and is equipped with gears, spindles, chucks, gear speed control levers, and feed controllers.Tailstock: ... Bed: ... Carriage: ... Lead Screw. ... Feed Rod. ... Chip Pan. ... Hand Wheel.
What are the six 6 major parts of a lathe machine?
There are six major parts of a lathe machine. These are the bed, the headstock assembly, the main spindle, the tailstock, the carriage, and overload safety devices.
How do you fix a tailstock?
5:2715:48How To Repair a Lathe Tailstock of a Clausing Lathe | Tail Stock - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere then I'll mill it to thickness. And then we'll cut it off and then I'll mill the back edge ofMoreHere then I'll mill it to thickness. And then we'll cut it off and then I'll mill the back edge of it also. So it's the right height quarter of a quarter inch let me just drop everything.
What is a lathe spindle called?
On a lathe (whether wood lathe or metal lathe), the spindle is the heart of the headstock. In rotating-cutter woodworking machinery, the spindle is the part on which shaped milling cutters are mounted for cutting features (such as rebates, beads, and curves) into mouldings and similar millwork.
What is headstock used for?
Head StockThe main function of headstock is to transmit power to the diferent parts of a lathe. Itcomprises of the headstock casting to accommodate all the parts within it including gear trainarrangement. Themainspindleisadjustedinit,whichpossesseslivecentretowhichthe work can be attached.
What is a live tailstock?
0:022:20How and When to Use a Live Center on a Lathe - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo give a basic description of life centered all it is is a tapered in just like your Chuck whichMoreTo give a basic description of life centered all it is is a tapered in just like your Chuck which goes in your tail stock the other end is a conical shape that is supported by bearings.
What is spindle in lathe machine?
On a lathe (whether wood lathe or metal lathe), the spindle is the heart of the headstock. In rotating-cutter woodworking machinery, the spindle is the part on which shaped milling cutters are mounted for cutting features (such as rebates, beads, and curves) into mouldings and similar millwork.
What is a tailstock quill?
The tailstock quill or extendible portion usually has a Morse taper mount in the end of it to secure the drill or reamer. If the work is heavy the drill may be further secured from turning with a lathe dog as shown in the photo. Headstock. A headstock or peghead is part of a guitar or similar stringed instrument such as a lute, mandolin, banjo, ...
What is a support on a lathe?
support consisting of the movable part of a lathe that slides along the bed in alignment with the headstock and is locked into position to support the free end of the workpiece
What is a headstock on a guitar?
Headstock. A headstock or peghead is part of a guitar or similar stringed instrument such as a lute, mandolin, banjo, ukulele and others of the lute lineage. The main function of a headstock is to house the pegs or mechanism that holds the strings at the "head" of the instrument.
What is a headframe?
A headframe. Headstock (noun) A part of a machine (such as a lathe or drill) that supports a rotating part. Headstock (noun) A beam that supports a bell. Headstock (noun) A clamp that restrains a cow by the neck. Headstock (noun)
What is the tailstock on a lathe?
The tailstock sits opposite to the chuck and helps hold the work piece firmly and parallel. If you are turning a short piece of material, you won’t need the tailstock. Also if you are boring or drilling on a lathe you can’t use the tailstock.
Why do tailstocks slide along?
Tailstock slides along to accommodate different lengths of workpiece being worked out.
What is the spindle on a lathe?
On a lathe, the spindle will usually hold a chuck (which holds and rotates the work piece). The tailstock sits opposite to the chuck and helps hold the work piece firmly and parallel. If you are turning a short piece of material, you won’t need the tailstock.
What is a hollow cylindrical shaft?
Hollow cylindrical shaft. The main spindle is hollow in order for long bars to extend through to the work area. It is supported by precision bearings and is fitted with chucks or faceplates to hold workpieces. A taper is often included at the end of the spindle.
What side is the headstock on?
Headstock : It's on the left hand side and it has the live centre (means it rotates, just in case, rotation is needed). It has gears, spindle, pulleys. Headstock spindle is hollow cylindrical shaft that provides a drive from motor to work the holding device. . .
Why use magnetic chuck?
If the workpiece is ferrous thin type then we use magnetic chuck for ease of operation.
What is a lathe?
Continue Reading. A lathe is a machine tool primarily used for shaping pieces of metal and sometimes wood or other materials. Lathes operate by spinning the block of material to perform various tasks such as cutting, sanding, or drilling with tools that are applied to the work piece.
Where is the tailstock located on a lathe?
The tailstock is situated on the inner lathe at the right end of the bed. The tailstock is used to assist the other end of the work as it is machined between centers. It carries a tool for carrying out operations such as drilling, tapping and reaming, etc.
What is tail stock in lathe?
In a Lathe Machine, Tail-stock is a sliding part in X-axis and fitted to opposite of the Head stock of the machine. By using tail stock, we can put centre drill, and drilling of different sizes by using drill bits, which will help to pre boring of internal diameter of the job. With the support of tail stock by using revolving centre, and job having centre drill, can turn long shafts, shafts of taper with limited taper.
What is a barrel in a tailstock?
barrel is a type of cylindrical rod in body of tailstock having some threaded portion to accommodate the threaded spindle in it at one end and other end is used to support the workpiece .
Why do tailstocks slide along?
Tailstock slides along to accommodate different lengths of workpiece being worked out.
What is the purpose of a lathe?
The purpose of a lathe centre is to support a long job at its other end so that the job becomes a simply supported beam instead of a cantilever. So the job deflection is less and machining quality is better. In normal lathes, there is a dead centre at the tailstock that supports the job.a dead centre is stationary. When a job is supported by a dead centre, job revolves but centre is stationary. So there is a lot of heat produced due to friction. For small rotation speed of the job, there is no problem. But when machining at high speed, frictional heat can melt a job or centre.
What is a headstock spindle?
Headstock spindle is hollow cylindrical shaft that provides a drive from motor to work the holding device. .
What is bull gear?
On machines built during the 1950s, the spindle was directly driven by a flat belt pulley. The bull gear is used to lower spindle speed. Modern lathes use gear boxes. Suitable speeds are selected through the gearbox.
Why use tailstock on lathe?
It is also used on a lathe to hold drilling or reaming tools for machining a hole in the work piece.
What is a tailstock used for?
Tailstock used for drilling. A tailstock, also known as a foot stock, is a device often used as part of an engineering lathe, wood-turning lathe, or used in conjunction with a rotary table on a milling machine . It is usually used to apply support to the longitudinal rotary axis of a workpiece being machined.
How to move tailstock?
There, it is locked in place and the tool mounted to it is moved with a leadscrew to the exact position where it is needed. When a cutting tool such as a drill bit or reamer is used, the feed is done with this leadscrew. The tailstock quill or extendible portion usually has a Morse taper mount in the end of it to secure the drill or reamer. If the work is heavy the drill may be further secured from turning with a lathe dog as shown in the photo.
What is the taper mount on a tailstock?
The tailstock quill or extendible portion usually has a Morse taper mount in the end of it to secure the drill or reamer. If the work is heavy the drill may be further secured from turning with a lathe dog as shown in the photo.
When to use taper turning?
Generally, when the angle of taper is very small this taper turning methods in lathe machine will be employed. The workpiece be placed in the live center. Now, the tailstock will be moved in a crosswise, that is perpendicular to the lathe axis by turning the set over method. This process is known as tailstock set over method .