What is a tigersaw miter saw?
TigerSaw Miter™ is a fully automatic push-feed upcut saw system for cutting miter angles on aluminum, copper, fiberglass, wood, plastics, and more. Quickly and accurately cut miters to a tolerance of +/- .1° with TigerSaw Miter.
What is a tigersaw 1000 optimizing cut off saw?
The TigerStop TigerSaw 1000 Optimizing Cut Off Saw is the perfect fully automated optimizing push feed saw station for fast and accurate cutting of wood and plastic materials. It increases yield, accuracy, and productivity at the best value point in the industry, offering uncompromising quality.
Why choose sawgear by tigerstop?
Quality control starts with SawGear by TigerStop. Keep your operators in the money making zone: cycling your saw, drill, or punch. An unskilled operator can be trained to use a SawGear to position material in under 10 minutes. Raw material costs are rising. Using a SawGear maximizes yields and adds profits to your bottom line.
What can I do with my sawgear?
SawGear may be used with vertical panel saws and double miter saws, ironworkers, drills, chop saws, and more! Add portable tables to your SawGear setup and take accuracy and repeatability from the shop to the job site. For stationary work add TigerStop tables to your SawGear. TigerStop tables are pinch free and designed from cold rolled steel.
What is Tigertouch flooring optimization?
How much can a Tigersaw 1000 push?
How many grades can you scan on a Tigersaw 1000?
What is a cascading cut list?
What is dynamic pack optimization?
What is Dynamic Optimization software?
What is cut list control?
See 2 more
What is an Upcut saw?
Up cut saws are manually operated crosscut saws that contain the circular blade inside the body of the machine. The blades on these machines employ an up cut motion into a top clamp hold down, allowing them to be used on many different materials.
What is a Tiger stop?
0:031:35TigerStop - Automated Material Pusher - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe tiger stop is an automated material pusher which is designed the safety time material.MoreThe tiger stop is an automated material pusher which is designed the safety time material.
How do you set up a Tiger stop?
0:002:52How To Calibrate Your TigerStop - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo for this video I'm going to cut a piece at 5 inches that'll put us within the range of myMoreSo for this video I'm going to cut a piece at 5 inches that'll put us within the range of my calipers. So we'll set the tiger stop to 5 and start we'll but the material up and we'll make our cut.
How Much Does a TigerStop cost?
It adds automation that can be controlled from one side of your saw and has a repeatable accuracy of +/- . 003 inches (. 07mm). Pricing starts at $4,699.00.
How do you calibrate a tiger saw?
0:062:08How To Calibrate Your TigerSaw 1000 & TigerSaw 2000 - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe're going to set it right in front of the pusher foot. And using tiger touch we're going to go toMoreWe're going to set it right in front of the pusher foot. And using tiger touch we're going to go to the move tab off on the top left of the screen. And we're going to send it into a short distance.
How do you calibrate a Sawgear?
0:274:02How to Calibrate and Scale a SawGear - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we're at five point five seven five we're gonna hit the calibrate button and enter in five point.MoreSo we're at five point five seven five we're gonna hit the calibrate button and enter in five point. Five seven five and press start.
Why is Tigersaw Miter so good?
Raw material costs are extremely high. Operators can’t afford to scrap perfectly good material due to inaccuracies and human error. TigerSaw Miter eliminates scrap waste with its fast and accurate positioning and adds dollars back onto your bottom line.
What tolerance is Tigersaw Miter?
Quickly and accurately cut miters to a tolerance of +/- .1° with TigerSaw Miter. Forget manually measuring, marking material, and positioning a miter saw. TigerSaw Miter accurately push feeds material and cuts parts to the desired length every time.
What is the purpose of a front fence?
The front fence ensures material stays flush against the back fence as it is being fed out of the saw. It automatically moves out of the way of the saw blade so there is never any risk of collision.
Can operators cut all straight lengths to size?
Many operators will cut all of their straight lengths to size and then re-handle the same material to cut miter angles. Not anymore.
Can you use a PC with a TigerStop?
TigerSet. The TigerSet software upgrade opens up a communication port on your TigerStop so you can use a PC, PLC or Barcode Scanner to control your TigerStop systems. You can also create your own code using TigerStopSDK, TigerStop's open source software development kit, if you have TigerSet.
What is dynamic optimization software?
Dynamic Optimization software gives you the best yield by determining the optimal cutting order from your parts list. Improved material yield saves money on raw material and reduces scrap waste. Pair Dynamic Optimization with a laser scanning and defecting pusher foot for even greater throughput.
What tolerance is Tigersaw MiterXL?
Quickly and accurately cut miters to a tolerance of +/- .1° with TigerSaw MiterXL. Forget manually measuring, marking material, and positioning a miter saw. TigerSaw MiterXL accurately push feeds material and cuts parts to the desired length every time.
What is an extended pusher foot?
The extended pusher foot is a flat pushing attachment for the TigerStop. The pushing...
What is Tigersaw MiterXL?
TigerSaw MiterXL’s Dynamic Optimization software will ensure that material waste is reduced to a minimum, by optimizing for length and cut efficiency. TigerSaw MiterXL offers complete reporting of material yields and saw run-time efficiencies, as well as job simulation software, allowing customers to determine accurate job costing before cutting any material.
What size labels does Tigerstop print?
TigerStop's label printer prints custom part information on to 4" labels for each piece...
What is cut list control?
This allows the operator to value items in a cut list individually. This will provide complete control over what’s produced first in a cut list even if the most “valuable” pieces are shorter in length.
How does Tigersaw 2000 work?
Every time a piece of material is run through the TigerSaw 2000, material information is stored, including material length and defects detected. This allows the operator to create an order and run the previously run material against the order off-line. The operator will now know his yields before ever running a stick of material. This greatly assists in job costing.
How does Tigersaw 2000 work?
If you are running the TigerSaw 2000 at maximum throughput you should consider adding the Auto Loader. The Auto Loader is an automatic infeed station that will increase machine efficiency and operator productivity. It aids throughput without adding additional labor costs. The operator loads stock, either single pieces or packs/bundles onto the Auto Loader. Auto Loader automatically indexes material into the saw, freeing the operator to perform additional value-add tasks such as sorting finished parts. This can allow you to run the saw at maximum capacity with a single operator.
How much weight can a TigerTurbo handle?
It can be configured to handle large pack loads with the TigerTurbo or up to 2,100 lbs. with the optional HeavyDuty 2.
What size blades can Tigersaw 2000 accept?
TigerSaw 2000 can be adjusted to accept 350 mm., 450 mm. and 500 mm. saw blades.
What is Tigersaw 2000?
TigerSaw 2000 is the perfect automated saw station for cutting non-ferrous metals like aluminum faster and more accurately than manual approaches. It will increase yields, accuracy and productivity at the best value point in the industry.
What printer does Tigersaw 2000 use?
TigerSaw 2000 can be equipped with an inkjet printer that will print customized part information on each finished piece. This will allow you to batch jobs of the same profile and easily sort the parts on the back end. Label printing is also available.
How does Tigersaw 2000 save labor?
The TigerSaw 2000 is fully automated, which increases productivity and saves on labor. No more setting stops manually, simply enter your cut list and place material on the infeed. TigerSaw 2000 will scan the length of the material and automatically push it through the saw. This saves time and greatly reduces operator errors with its repeatable accuracy of +/- .012 inch (.3 mm).
What is the standard angle of a Tigersaw 2000 table?
The available table configurations for TigerSaw 2000 are flat or back tilted to the industry standard of 10 degrees.
Full line CNC router and storage system double production and decrease lead times
Cuisi-n-art, of Gatineau, Quebec, with an eye to the future, undertook a large construction project to double the size of their manufacturing facility and increase their production capacity. The centrepiece of their manufacturing plant expansion was implementing two Anderson Stratos Pro Full-Line CNC Routers and Schelling material storage system.
CNC Series: Vacuum, when design and efficiency mean everything
When it comes to vacuum, hold down a bigger pump is not necessarily the answer. More important is the design of the vacuum table and how efficient it is at holding small parts during machining operations.
CNC Series: Weight, where bigger is better
Producing with optimum cut quality, increased production, and superior cutter performance. Choosing the right solution for your shop involves research and understanding which match your production expectations and future goals.
When will Tiger Saw be released?
“Wet & Unlucky” also features harmonies from Dead Gowns’ Geneviève Beaudoin, and will be released on Epifo Music on July 4, 2021.
Where was Tiger Saw formed?
Tiger Saw formed in 1999 in Newburyport, MA. The “classic” lineup consisted of Dylan Metrano and JR Gallagher on guitars, Juliet Nelson on cello, Matt Kulik on drums, and Jake Trussell on bass.
Who were the members of the 2010 Nightingales?
2010 saw a new lineup: Dylan Metrano, Evan Orfanos, Christopher Holt, Glenn Forsythe, Emily Forsythe, and Guy Capecelatro III. They recorded a new album, “Nightingales” which also featured a string quartet and harkened back to the classic slowcore sound.
Who was Tiger Saw's band?
In 2008, Tiger Saw toured as a trio with Dylan Metrano, Anna Vogelzang, and Joseph Arnold. Then Metrano did a solo tour with the rapper Cathy Cathodic. The full band performed a live score to the silent film “The Adventures of Prince Achmed” and played shows with Wye Oak, Dirty Projectors, and many others.
Porter-Cable PC85TRSOK Tiger Saw Features
The Tiger Saw came in a fitted rectangular cardboard box that had a cutout in the top so that it could be carried by the flip up handle on the hard case. Inside, the hard plastic case contained the TigerSaw, a 6-inch wood blade and instruction manual.
Porter-Cable PC85TRSOK Tiger Saw Testing
One of the first things we noticed about the Porter Cable PC85TRSOK 8.5 Amp Orbital Reciprocating Tiger Saw is that, for a orbital action saw, it is pretty light at 7.4 lbs. This definitely helps to make it feel well-balanced. The 1-1/8″ stroke with up to 3200 SPM and the orbital mode made for a winning combination when doing demolition work.
Conclusion
The Porter Cable PC85TRSOK 8.5 Amp Orbital Reciprocating Tiger Saw is designed to cut through just about anything since it has a orbital and regular reciprocating modes. When set to orbital mode, it was ready to do some serious demolition work.
What is Tigertouch flooring optimization?
The Flooring Optimization software upgrade for TigerTouch is perfect for manufacturers of flooring who need to ship finished products in very specific pallet sizes. Use with the Defect Scanning Pusher Foot to cut random lengths around defect marks. Flooring Optimization software replaces the need to purchase custom flooring packaging machines by allowing you to pre-define package lengths.
How much can a Tigersaw 1000 push?
TigerSaw 1000’s adjustable cutting envelope can accommodate pack sizes from 6in x 6in to 1in x 16in envelopes and the HeavyDuty 2 can push loads up to 2,100 lbs.
How many grades can you scan on a Tigersaw 1000?
TigerSaw 1000 with a Defect Scanning Pusher Foot allows you to process up to 3 different grades of material at the same time. Drawing either 2, 3, or 4 lines with a UV Crayon tells your TigerSaw 1000 which grade list to process. Drawing a single crayon line indicates the beginning of a knot.
What is a cascading cut list?
Cascading Cut Lists, runs pattern, push feed, or set point cut lists sequentially, or in a cascading effect, until the entire job is finished. It can be used for processing metal, wood, composites, or plastic.
What is dynamic pack optimization?
Dynamic Pack Optimization gives you the best yield by determining the optimal cutting order from your parts list. Improved material yield saves money on raw material and reduces scrap waste. It allows operators to optimize perfectly, because TigerSaw is doing the math.
What is Dynamic Optimization software?
Dynamic Optimization™ software comes standard and automatically determines the best yield from your cut list. Improved material yield saves money and reduces waste. It allows operators to optimize perfectly, because TigerSaw 1000 is doing the math.
What is cut list control?
This allows the operator to value items in a cut list individually. This will provide complete control over what’s produced first in a cut list even if the most “valuable” pieces are shorter in length.
