What is the purpose of the disks on a tractor?
When pulled behind a tractor, the disks work to till the soil, chopping both weeds and stover (stalks, leaves, etc. left from the previous crop) to prepare the seedbed for planting a new crop. The disks can be perfect circles, serrated, or scalloped.
Where can you buy used tractor disks?
Popular manufacturers of new and used disks available on Tractorhouse.com include Case IH, Industrias America, International, John Deere, Krause, Landoll, LEMKEN, Rome, Sunflower, and others. Some of the most plentiful models on TractorHouse.com are the John Deere 637 and 2623, Case IH 496 and RMX340, and Sunflower 1435 models.
How does a disc mower work?
Generally, there are 2 free-swinging blades bolted to each disc. The discs are driven either by a shaft or gears that are inside the cutter bar. Like with a sickle bar, the cutter bar essentially slides along the ground, which is what controls the cutting height. The advantages of a disc mower are:
What is a disc harrow used for in agriculture?
A disc harrow is an agricultural implement that is used to till the soil where crops will be planted. It can also be used to chop up any unwanted weeds or crop remainders. Throughout your research, you may also hear the term “discer” if you’re interested in discing a field. A discer is an evolved form of a disc harrow.
What is a tractor disk?
What is the most sought after tractor size?
What is the best 100hp tractor brand?
How much diesel does a 100hp tractor use?
What is the best tractor for a large acre?
What is 100 HP tractor?
How much does a Kubota tractor cost?
See 2 more
What is the difference between a harrow and a disc?
What's the difference between a chain harrow vs disc harrow? Chain harrows lift and spread the soil while a disc harrow breaks up large clumps of dirt to prepare it for planting.
Is disking the same as tilling?
Disking is an important tillage practice, even for farmers who manage crop production with reduced tillage. In order to reduce disturbing the soil, the most successful famers reduce the use of various farm machines and equipment.
What's the difference between disc and plow?
Disc plough is used to till the uncultivated land and disc harrow is used to till the disc plow turned land. If the ground has been turned with a dis plow, the disc harrow should be fine. Also if the land is soft light duty disc harrow can used as disc plow to cultivate the land.
What does a 3 point Disc do?
AMCO's three-point discs are built to be just as tough and flexible as our large harrows. They may be compact, but they can handle just about any job—from maintaining turn rows to building food plots and fire lanes, cleaning up cutover, preparing construction sites, and more.
How much does it cost to disc an acre?
Disk/Chisel —————- $19.70 per acre. V-Ripper (deep tillage) — $23.45 per acre. Field Cultivator ———— $16.00 per acre. Tandem Disk ————— $15.40 per acre.
Whats better tiller or disk?
While a disc harrow is used to get to the deeper layers of the soil thanks to its heavier design, a rotary tiller is meant to overturn the upper layers of the soil. Rotary tillers are an excellent option for those who don't have a lot of time and would like to get their soil ready for planting as soon as possible.
Why do farmers use discs?
Discing is an important tillage practice that is used for soil preparation. It's done using a disc harrow, which is a piece of farm machinery utilized to break down soil clods. This allows water to penetrate more easily and that increases soil aeration as well as enhances the activity of the soil flora and fauna.
Why do farmers not plow anymore?
Plowing the soil has been compared to a tornado ripping through a city. While that may be an extreme analogy, plowing does disrupt the living organisms in the soil and exposes more of the soil to the air, which accelerates evaporation and loss of essential soil moisture and nutrients.
Do you disc or plow first?
After plowing, a field needs to be worked with a cutting disk to break up soil chunks. “Most discs have an adjustment for how aggressively you want them to cut by changing the angle of the gangs,” Kuhn says.
How fast should you disc a field?
In most conditions, the optimal operating speed is approximately 4–6 miles per hour. In sandier soils, discs can be operated up to 8 miles per hour. If you are unsure what the right speed is for your soil conditions, make a few test passes at different speeds and measure the furrow depth.
Why do you disc a field?
Disking for wildlife is the process of disturbing soil and existing vegetation in an area by using a disk. Disking disturbs the ground surface and vegetation to prevent an area from going through succession to a woody condition and stimulates establishment of annual plants that provide wildlife food and cover.
What does beating in a disc do?
It makes the disc more understable, which is to say it increases the turn and reduces the fade typically. In general discs will lose both turn and fade. However, not all discs beat in the same way.
What does disking mean in farming?
1:025:59DISCING a Field: 5 Things You Should Know - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo here are the top things you need to know about disking a field number one a discaro is anMoreSo here are the top things you need to know about disking a field number one a discaro is an agricultural implement that is used to till the soil where crops will be planted. It can also be used to
Is harrowing primary tillage?
Different types of implements like cultivators, harrows, planks and rollers are used for secondary tillage.
What is harrowing in tillage?
It is used after ploughing for breaking up and smoothing out the surface of the soil. The purpose of harrowing is to break up clods and to provide a soil structure, called tilth, that is suitable for planting seeds. Coarser harrowing may also be used to remove weeds and to cover seed after sowing.
What is the alternative to tilling soil?
Rotted leaves, aged manure, compost or straw are all good options. Ideally, a mix of several of these options is even better. While you could stop here, I add one more layer of shredded wood chips. It adds some bulk and weight and will ultimately break down to improve the soil even more.
Compare Frontier Disks
When it’s time to work your land, Frontier™ Disks are built to handle a variety of unpredictable soil conditions.
Compare Frontier Heavy Offset Disks
Break up hard, fallow ground with a Frontier™ Heavy Offset Disk. Large, heavy-duty blades on rugged, reinforced frames provide ground-breaking force, penetration, and High load absorption to withstand punishing tillage jobs.
Compare Frontier Tandem Disks
Large producers and commercial operators want to cover a lot of ground in a hurry, and they can do just that with a Tandem Disk from Frontier™ Equipment. Large blades, deep penetration, and heavy-duty frames make even the largest projects manageable.
Compare Frontier Vertical Tillage
The Frontier™ VT17 Series Vertical Tillage tools provide speed, versatility, and residue management performance for growers.
Technology & Tips
Enjoy all the benefits of a connected machine with a 4G JDLink MTG (modem), standard. Just activate the JDLink wireless service within your John Deere Operations Center account to start streaming machine and crop data to your account free of charge.
What is a tractor disk?
A tractor disk is a harrow that is used to till the soil where crops are to be planted. Its cutting edge is made up of a row of concave metal discs which may be scalloped or set at an oblique angle.
What is the most sought after tractor size?
100hp tractor is regarded as the most sought out after size. This is why most brands have a 100hp tractor size.
What is the best 100hp tractor brand?
The Kubota brand of tractor has built a reputation of producing one of the best 100hp tractors in the world.
How much diesel does a 100hp tractor use?
A 100hp tractor operating at full load uses 7.69gal/hr. On the same light, a gasoline tractor of a 100hp capacity uses 9.0/11.1gal/hr. and an LP gas tractor uses 7.5 or 13.3 gal/hr.
What is the best tractor for a large acre?
If you have a large acre of land, a 100hp tractor is the best for you. Forget the fact that it is slightly expensive.
What is 100 HP tractor?
100hp tractors are used for multitudes of farm applications , unlike other types. Their capability to carry loads with front loaders gives them an added advantage over the remaining sizes of tractors.
How much does a Kubota tractor cost?
For the above Kubota brand, you can get it between $90,000 to $100,000. In other brands, you can get a 100 hp tractor of $50,000 to $75,000. So it all depends on your choice.
2009 KRAUSE 7400-46WR
Used 2009 Krause 7400-46WR Disk - 45 Foot, 21 Inch Front Blades, and 22 Inch Rear Blades. For more information contact Michael at your local Western Equipment at or shiller@ For more information...See More Details
2021 KUHN KRAUSE INTERCEPTOR 8050
25' Model.. CALL TODAY.. Cat IV Power Pin Articulating Hitch, Adjustable Level-Lift Tongue, Single Point Hydraulic Depth Control, Excalibur CT Blades - 22" Diam. 5mm, 32Flute, Heavy Duty Center Ti...See More Details
2016 GREAT PLAINS SD2600
Great For Leveling Ruts & Burying Corn Fodder. 26Ft Working Width, 2 Section Folding W/ Tandem, Hydraulic Leveling, Has 4 Rows of Spikes On Rear Attachment.
2015 CASE IH TRUE TANDEM 345
28' working width. Single point depth adjustment. Hydraulic fore/aft leveling. 1 owner. Worked great this fall just don't need it any more. Switching to strip till only reason for selling.
How are discs driven?
The discs are driven either by a shaft or gears that are inside the cutter bar. Like with a sickle bar, the cutter bar essentially slides along the ground, which is what controls the cutting height.
What is tractor tools direct?
At Tractor Tools Direct we pride ourselves in not only selling top-quality small farm equipment but also in providing the information our customers need to make wise purchases. Having already covered the pro and cons of drum and sickle bar mowers in our two previous newsletters, we will conclude our discussion of mower choices with disc mowers.
How many blades are in a disc mower?
Generally, there are 2 free-swinging blades bolted to each disc. The discs are driven either by a shaft or gears that are inside the cutter bar. Like with a sickle bar, the cutter bar essentially slides along the ground, which is what controls the cutting height.
Can you lift a tractor bar vertically?
If your tractor does not have hydraulics, you won’t be able to lift the cutter bar vertically to get through gates and other narrow areas. Weight. You have the horsepower and the hydraulics, but your tractor is lightweight. This can be a safety hazard because of the much heavier cutter bar compared to a sickle bar mower.
Can a disc mower clog hay?
No clogging. Disc mowers handle thick and lodged hay with ease.
Can a disc mower tip over?
When the mower is in the vertical transport position it can tip the whole tractor over unexpectedly. Expense of repair. If you frequently mow in places where you might hit something solid like a boulder, old fence post, etc. Disc mowers, when damaged, can be extremely expensive to repair.
What is discing in tillage?
by Erika. Have you ever heard of the practice of discing a field? Discing is an important tillage practice that is used for soil preparation. It’s done using a disc harrow, which is a piece of farm machinery used to break down soil clods.
When to disc a field?
For optimal results, you should disc your field in late winter to early spring.
What are the advantages of discing a field?
These are the top five advantages of discing a field. They all relate to easier soil management. Closing the furrow made after plowing which helps to preserve the soil’s benefits. Breaking down large chunks of compacted soil. Provoking weed growth and destroying newly emerged ones. Cutting, crushing, and mixing soil.
What is a disc harrow?
A disc harrow is an agricultural implement that is used to till the soil where crops will be planted. It can also be used to chop up any unwanted weeds or crop remainders. Throughout your research, you may also hear the term “discer” if you’re interested in discing a field. A discer is an evolved form of a disc harrow.
What is fallow discing?
Fallow discing is when you disc an area after the first freeze and before the last freeze of winter. It gets its name from “fallow” which is an agricultural term for land that has been but is not currently in crop production. Fallow land may also be referred to as “laid out” or “idle.”.
Where should fallow discing be performed?
Fallow discing should be performed in areas in close proximity to available cover. These are locations where wildlife can readily escape from predators or other disturbances. When selecting a site, consider terrain, drainage areas, and location of soils suitable for discing a field.
Why do we use discing?
It helps to establish food strips, create field borders, install fire lines, and simply set back older vegetation and renew succession. Discing may be used in larger areas where burning may not be feasible or will not provide the desired results.
How much disc can a 40HP tractor handle?
For a disc/chisel/plow, you're looking at engine HP. Also weight and traction. A 40HP tractor can handle anything from a heavy 5' 3pt disc to a lightweight 10' drag disc harrow depending upon conditions.#N#In general.............a 40hp 2wd tractor mated to a 6-7' mounted tandem disc is pretty safe. You probably won't know for sure until you get your tractor and a disc out there on the place and try to do what you want to do with them to know for sure.
Is a tractor a dozer?
Tractors ain't dozers, so front blades tend to be hazardous to some FELs if used as dozers.
Can tractors take a front blade?
Another consideration, also partially hp related, is using a blade. Some tractors can take a front blade; all can take a rear blade on the 3-point. My terrain is nearly level but also somewhat hummocky, and will be more so after I pull some trees. How do rear blades, box scrapers, and front blades compare for light-duty grading? Seems like a rear blade would be harder to use. Is a box scraper of equal (or greater?) utility for grading? Thanks, NE
What is a tractor disk?
A tractor disk is a harrow that is used to till the soil where crops are to be planted. Its cutting edge is made up of a row of concave metal discs which may be scalloped or set at an oblique angle.
What is the most sought after tractor size?
100hp tractor is regarded as the most sought out after size. This is why most brands have a 100hp tractor size.
What is the best 100hp tractor brand?
The Kubota brand of tractor has built a reputation of producing one of the best 100hp tractors in the world.
How much diesel does a 100hp tractor use?
A 100hp tractor operating at full load uses 7.69gal/hr. On the same light, a gasoline tractor of a 100hp capacity uses 9.0/11.1gal/hr. and an LP gas tractor uses 7.5 or 13.3 gal/hr.
What is the best tractor for a large acre?
If you have a large acre of land, a 100hp tractor is the best for you. Forget the fact that it is slightly expensive.
What is 100 HP tractor?
100hp tractors are used for multitudes of farm applications , unlike other types. Their capability to carry loads with front loaders gives them an added advantage over the remaining sizes of tractors.
How much does a Kubota tractor cost?
For the above Kubota brand, you can get it between $90,000 to $100,000. In other brands, you can get a 100 hp tractor of $50,000 to $75,000. So it all depends on your choice.