What is a triple square screwdriver?
A type of screw drive with 12 equally spaced tips, each with a 90 degree angle, is Triple square, also known as XZN. Its name derives from overlaying three equal squares with 12 right-angled tips to form such a pattern. What is the difference between Torx and triple Square?
What is a triple square bolt pattern?
Its name derives from overlaying 3 equal squares to form such a pattern with 12 right-angled tips. Common sizes are 6, 8, 10, and 12 mm. Triple square drives are used in high torque applications, such as cylinder head bolts and drive train components.
What is the difference between a triple square and a Torx?
A triple square is just that, overlaid with 3 squares, each point being 90*. A Torx has a profile which is completely different. For VW work, any good set of triple square sockets (bits) will have the sizes you need. Here is a good PDF on the bolt head measurement, although if you have a set, just use what fits.
What is a triple square bit?
When it comes to drive train components and cylinder head bolts, the triple square bit offers a higher allowable torque to remove even the toughest or most seized components. Versatile use. The great thing about triple square bits is that they have a variety of implementations.
What is the difference between triple square and Torx?
0:092:28BIG differences between (triple square) (star) bits and (hex) bits - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's basically just three squares stacked on each other.MoreIt's basically just three squares stacked on each other.
What cars use Triple Square?
Triple Squares are a type of fastener often found on VW and Audi models. Without having the proper tools to remove them you are almost certain to damage the bolts trying to remove and install them. This kit includes most of the common sizes required when working on VW and Audi Models.
Is a triple square a 12 point socket?
10mm 12-point socket fits many fasteners found on VW, Audi & Porsche cars. This special 12-point size is also called Triple-Square or "XZN".
What is a triple square screwdriver?
The triple-square, also known as XZN, is a type of screw drive with 12 equally spaced protrusions, each ending in a 90° internal angle. The name derives from overlaying three equal squares to form such a pattern with 12 right-angled protrusions (a 12-pointed star).
Why do cars use Torx screws?
By design, Torx head screws resist cam-out better than Phillips head or slot head screws. Whereas the tendency of Phillips drivers to cam out under excessive torque has been listed as a feature preventing damage to the screw-head or driver, Torx heads were designed to prevent cam-out.
Where are triple square sockets used?
12-stared XZN/triple square fasteners are often used in high torque automotive applications such as cylinder head bolts and drive train components.
Can you use Torx for Triple square?
1:243:33••hex/allen••triple square••torx/star••poly drive - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe triple square is the correct size for this bolt here it fits in there very nicely. But also aMoreThe triple square is the correct size for this bolt here it fits in there very nicely. But also a Torx. Also fit in there.
Is XZN same as Triple Square?
End of dialog window. Is the XZN socket a special type of Triple Square socket, or are they the same thing? Now you have me wondering because RLers use either to hold the alternator shaft while performing a belt change. Googled....they are the same.
What is a 12 point bit called?
A 12-point end is a double-hexagon (sometimes called “double-hex”)—it has 12 points, or vertices, evenly spaced at 30 degree increments around a circle. This geometry will also fit on a 6-point fastener.
Why are there no Robertson screws in America?
Robertson screws are just about impossible to strip, unlike Phillips-head ones, which become unusable about thirty seconds after you've brandished the screwdriver at them. They'd be popular in the States except that Henry Ford wanted exclusive rights to them, and Robertson (the inventor, a Canadian) refused to sell.
What are tri wing screws used for?
Tri-Wing Screws are the common choice for high volume assembly operations while offering a minimal degree of security. Machine screws & sheet metal screws are offered in a Pan-Head design and Opsit® reverse thread.
What's the difference between Torx and hex?
Unlike hex keys, which usually have a hexagonal cross-section along their entire length, Torx keys frequently have a circular cross-section, with the Torx shape only appearing at the ends of the tool.
Why are cars no longer squared?
In the decades since, cars have just gotten curvier and curvier. Why the big shift? It turns out it was largely due to three interrelated factors: European style trends, a government-mandated push for fuel economy, and new technologies that allowed manufacturers to more easily design and create curved shapes.
What kind of car is square body?
The Square Body Chevy is the third generation of Chevrolet C/K trucks. Named for its iconic box-body design, the Square Body was in production from 1973 until 1987. The 14-year production span makes these trucks popular choices for restorations and restomods.
What are those three wheeled cars called?
Cars with 3 wheels are often called autocycles, three-wheeled cars, or simply three-wheelers. The first model was introduced in 1885, and since then many different models have appeared and disappeared. But it's safe to say that just like trike motorcycles, autocycles have always existed on the market.
What are those box cars called?
A boxcar is the North American (AAR) term for a railroad car that is enclosed and generally used to carry freight. The boxcar, while not the simplest freight car design, is probably the most versatile since it can carry most loads.
What is a Triple Square bit? What is it used for?
Triple Square bit is one of the common drilling bits. Triple Square bit has three square-shaped heads that its name implies. These heads are interlocking squares at all 90 degrees angles.
What is the difference between Torx and Triple Square?
Many people think that Torx bits and Triple Square bits are the same. But these two bits are not the same. They have some differences in their shapes and functions. So, let’s see what the differences between Torx and Triple Square bits are.
Can you use Torx instead of Triple Square?
No, you can’t use Torx instead of Triple Square. Generally, these bits are used based on their head shapes. Generally, Torx bits have a star shape like the traditional screwdrivers. But Triple Square bits have triple-shaped heads.
How many sizes of triple square bits are there?
There are only 9 sizes of triple square bits, and you can get a complete set of triple square bits available for $35. Metalnerd has individual bits available too if you don't want a set.
How many splines does a Torx have?
Torx drivers have 6 "splines" and XZN drivers have 12. Sometimes a torx will work on a triple square bolt (if it is not too tight) but this is not the smart way to work. VW uses XZN bolts all over the place. You should buy the proper tools if you want to remove XZN bolts.
How many points does Torx Plus have?
Then there are Tamper-proof Torx, with a peg in the middle. Then Torx Plus, with rounded edges, but still 6 points, then.... Tamper-proof Torx Plus, which has a peg in the middle, rounded edges, but only five points!
Is there room for the socket part of the triple square close to the fastener?
There are times as pointed out that there isn't room for the socket part of the triple square close to the fastener you are undoing.
Do you need to get a triple square bit seated before torque?
It is vital, though, that you get a triple square bit fully seated before applying torque. All the triple square bolts I have ever seen strip are because the user was either trying to torque the bolt at an angle or didn't have the bit fully seated.
Is triple square interchangeable with torx?
Triple square IS NOT interchangeable with torx!
Is 12 pt square?
I'm not sure of your answer, but I do know a 12 pt is not triple square. It is double hex. The angles on the flats are differnt. It is bad to use a 12 pt to turn a square plug.#N#Edit, I see this has been mentioned.
