So, what exactly does the number w12x26 mean? For example, the dimensions W12x26 indicate that the depth of the beam is roughly 12 inches and that the beam weights 12 pounds per lineal foot. In the same vein, what does w10x22 mean? Example: A “W10x22” beam has a depth of roughly 10 in (25 cm) and weights 22 lb/ft (33 kg/m.)
Full Answer
What does W12 mean on a beam?
Wide flange beams are designated by the letter W followed by the nominal depth in inches and the weight in pounds per foot. Thus W12 × 19 designates a wide flange beam with a depth of 12 inches and a nominal weight of 19 pounds per foot. Wide Flange Beam Sizes, Dimensions and Section Properties Chart. Desig-. nation.
What is ASTM A36 wide channel H Beam?
ASTM A36 Wide Channel H Beam is one of the most widely used carbon steels in industry. A36 steel it is weldable, formable, and machinable. Galvanizing the steel increases its corrosion-resistance. The following chart table gives cross section engineering data for ASTM Structural Steel Wide Channel I Beam as follows:
What is the weight of a 20 foot beam?
Wide Flange Beam, 6″ Depth, 4″ Width, . 280″ Thick, 12 lbsWeight Per Foot, 20 ft Length. What size steel beam do I need to span 16 feet?
What are the properties of A36 steel wide flange I beam?
Structural A36 Steel Wide Flange I Beam Section Properties Table in × lb/ft Area (in 2) d (in) bf (in) tw (in) W12x210 61.8 14.71 12.79 1.18 W12x190 55.8 14.38 12.67 1.06 W12x170 50 14.03 12.57 0.96 W12x152 44.7 13.71 12.48 0.87 42 more rows ...
What size is a W12x26 beam?
Wide Flange Beam Specifications ChartSIZELBS/FTDEPTHW12x262612.22W12x303012.34W12x353512.5W12x404011.9494 more rows
What does W12x26 mean?
W12x26, for example means that d (depth) is approximately 12 inches and the beam weighs 12 pounds per lineal foot.
What size is a W8x18 beam?
Structural A36 Steel Wide Flange I Beam Section Properties Tablein × lb/ftArea (in2)d (in)W8x247.087.93W8x216.168.28W8x185.268.14W8x154.448.1155 more rows
What is a W12 beam?
Wide flange beams are designated by the letter W followed by the nminal depth in inches and the weight in pounds per foot. Thus W12 × 19 designates a wide flange beam with a depth of 12 inches and a nominal weight of 19 pounds per foot.
What size is a W12 beam?
Wide Flange Beams - Misc ShapesSize & Weight Per FootA Depth In InchesW12 x 1611.99W12 x 1912.16W12 x 2212.31W12 x 2612.2293 more rows
What does W mean in steel beams?
wide flangesW-beams. The W in its name refers to “wide flanges.” The main difference between W beams is that the inner and outer flange surfaces are parallel. Furthermore, the overall beam must have a depth that is at least equal to the flange width. Usually, its depth is significantly greater than its width.
What does W10x22 mean?
In the United States, steel I-beams are commonly specified using the depth and weight of the beam. For example, a "W10x22" beam is approximately 10 in (254 mm) in depth (nominal height of the I-beam from the outer face of one flange to the outer face of the other flange) and weighs 22 lb/ft (33 kg/m).
What is a W21x44 beam?
W21x44 Weight Wide flange beams are designated by their depth x weight. The W21x44 designation indicates that the beam weighs 44 pounds per foot. A 10-foot section of W21x44 would weigh 440 pounds and a 50-foot section of W21x44 would weigh 2,200 pounds.
What does W6x9 mean?
7 will be about 4" tall and weigh 7.7 lbs/foot while W6x9 will be about 6" tall and weight 9 lbs/foot.
What is a W4 beam?
The “W” designates that it is a wide flange beam. The number that follows the “W” (4 to 44) is the nominal depth of the beam in inches. The next number is the weight of the beam per one foot in length. Thus, a W4 x 13 would have a nominal depth of four inches and a weight of 13 lbs. per foot.
What size beam do I need to span 30 feet?
What size lvl beam for a 30 foot span:- as per general thumb rule, for a 30 foot span, size of LVL beam or GLULAM should be 16-18 inches deep and 4 inches wide, thus you need something like a 16-18″ GLULAM or LVL to span upto 30 feet used for residential building or projects.
How wide is a W24 beam?
W Beam DimensionsSection numberWt. Per foot (lbs)DimensionsDW2110121 3/8W245523 5/86823 3/467 more rows
What size is a W16x26?
ASTM Steel Wide Channel H Beam Section Properties various sizes ranging W14 - W25in × lb/ftArea (in2)d (in)W16x3610.615.86W16x319.1215.88W16x267.6815.69W14x66519621.6455 more rows
How do you read steel beam sizes?
The number that follows the letter is called the section number and is the “height” of the I. The second number is the pounds per lineal foot, or how much each foot of the beam weighs. Sometimes, there will be a third number that represents the length of the beam (in feet).
What is a W18 beam?
W-beams, also known as wide flange beams, are structural steel beams used for a variety of foundation applications. Eiffel Trading's wide flange beam inventory includes w-beams with flange dimensions ranging from W8 to W36. W18 beams specifically have a flange-to-flange dimension of 18".
What are WF beams?
A wide flange steel beam is a structural product made of rolled steel. Known for its sturdiness and ability to hold up large and heavy buildings, the wide flange beam is preferable in construction projects. The H design allows even distribution of weight without affecting the structural properties.