How to reset a whirlpool washing machine Cabrio?
Whirlpool Cabrio Washer “Option-1” Reset
- To clear the error code, tap any key on the display pad or, if possible, the Pause/Cancel key.
- To begin, select a new cycle and press the “Start” key.
- If the issue occurs again, turn off the power.
- Restore power after 15 to 30 seconds.
- Select a new cycle and click the START button.
Why is my Whirlpool Cabrio washer not draining?
Why is my Cabrio washer not draining? Check the washer's discharge hose if the water fails to drain from the washtub. Look for any kinks in the Cabrio washer's discharge hose that could stop the water from draining. Straightening the hose ensures proper draining. Test the drain pump to ensure it has not failed if the washer still will not drain.
How to replace heating element on Whirlpool Cabrio?
Things You Will Need
- Unplug the power cord. ...
- Remove the screws holding the rear access panel in place. ...
- Remove the screw at the top of the heating element assembly. ...
- Unplug the wires from the heating element with the needle-nose pliers.
- Remove the heating element assembly out of the Whirlpool Cabrio dryer cabinet.
- Remove the retaining screw at the base of the assembly. ...
How to fix a whirlpool Cabrio?
- Disconnect the power to the washer.
- Disconnect the water hoses and move the washer to a suitable location.
- At the rear of the washer, locate three screws on the bottom of the control panel, and remove them.
- Tilt the control panel up and push it forward.
How many cu.ft. is a washer?
Can you wash soccer jerseys in the washer?
About this website
:max_bytes(150000):strip_icc()/whirlpool-cabrio-588cffae3df78caebcd17af8.jpg)
What is a Whirlpool Cabrio?
Whirlpool brand's industry-first washing machines featuring the 2 in 1 Removable Agitator give you the flexibility of both an agitator and an impeller washer. You can easily add the 2 in 1 Removable Agitator to your load or just as quickly remove it and have extra room to wash bulky items.
How does Whirlpool Cabrio work?
4:536:32Whirlpool Cabrio 5000 - Wash Cycle Process - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd may not effectively reach all soils and stains in a high-efficiency washer the detergent isMoreAnd may not effectively reach all soils and stains in a high-efficiency washer the detergent is mixed with a small amount of water and is delivered directly to the soils and stains.
Are Whirlpool Cabrio washers discontinued?
Whirlpool Cabrio WTW5700XW has been discontinued. See all Whirlpool Top Loading Washing Machines.
What is the life expectancy of a Whirlpool Cabrio washer?
Top loaders typically have a longer life than front load washing machines. This model should last about 14 years.
Does the Whirlpool Cabrio washer have an agitator?
A: Hi Mikey, Cabrio has a washplate. The non cabrio which is usually called traditional washer has a agitator.
Does the Whirlpool Cabrio have an agitator?
The Whirlpool Cabrio come in two basic flavors, one with an agitator and the other with an impeller. The impeller or agitator is directly attached to the motor rotor by a short drive shaft that is embedded with a bearing through the bottom of the outer tub.
What is the capacity of a Whirlpool Cabrio washer?
Misc. SpecsAppliance Fit Width (in.)28Steam OptionYesTotal Capacity (cu. ft.)5.3Smart Home WifiNoType of WasherTop Load22 more rows
How large is Whirlpool Cabrio washer?
Large 4.8 cu. ft. capacity. Do more laundry in fewer loads.
What are the most common problems on a Whirlpool washing machine?
Here are seven of the most common problems on a Whirlpool washing machine and potential fixes for them.Washer Making Unusual Noises. ... Washer Won't Start. ... Washer Lid Won't Lock. ... LD Error Code Appears. ... Washer Leaves Deposits on Dark Clothes. ... Washer Has a Burned Plastic Odor. ... Rust Spots Appear on Washer Lid.
Is it worth repairing a 7 year old washing machine?
As a general rule, if it costs less than 50% of the price of a new washing machine to repair your old one, you should choose the repair option. But, you should also consider whether or not there is a warranty coverage on your washer and think about economic realities.
Which is the most reliable washing machine brand?
What brand of washing machine is most reliable? Whirlpool, LG, and Samsung are the most reliable brands of washers. Yale Appliance found that less than 7% of the sales of these units required servicing. J.D. Power also ranks Samsung and LG as the highest-ranking manufacturers in customer satisfaction.
What washing machine do repairmen recommend?
The top recommended brands overall: Whirlpool, Maytag and KitchenAid, in that order. Shopping for new laundry appliances? The Puls technicians surveyed rated Whirlpool the highest, followed by LG and Samsung.
What are the most common problems on a Whirlpool washing machine?
Here are seven of the most common problems on a Whirlpool washing machine and potential fixes for them.Washer Making Unusual Noises. ... Washer Won't Start. ... Washer Lid Won't Lock. ... LD Error Code Appears. ... Washer Leaves Deposits on Dark Clothes. ... Washer Has a Burned Plastic Odor. ... Rust Spots Appear on Washer Lid.
Where do you put the detergent in a Whirlpool Cabrio?
0:000:54Whirlpool washers - Detergent and softener - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf your washer doesn't you have the dispenser drawer and you're going to use liquid detergent add aMoreIf your washer doesn't you have the dispenser drawer and you're going to use liquid detergent add a detergent at the bottom of the basket.
How do I reset my Whirlpool Cabrio Top load washer?
How To Reset Whirlpool Cabrio Washer:Turn the washer off.Set the mode selector dial to NORMAL.Turn the dial counter clockwise ONE click (LEFT), clockwise THREE clicks (RIGHT), counter clockwise ONE click (LEFT) then clockwise ONE click (RIGHT).Now press the start button.More items...•
Why won't my Cabrio washer fill with water?
If you find your Whirlpool Cabrio washer not filling with water, the inlet hoses and screens may be at fault. The hoses connect the main water supply to your machine. Metal screens attached to both ends of the inlet hoses protect the water inlet valve from sediment and debris.
How to clean the filter on the Whirlpool Cabrio washer?
If your Whirlpool Cabrio has a filter, you must clean the filter regularly. Otherwise, the overall efficiency of the filter and washer will be hampered. So, you can follow a step-by-step process to clean the filter. Let’s see how you can clean the filter on the Whirlpool Cabrio washer.
Where is the filter on my Whirlpool Cabrio washing machine?
If you are new to using the Whirlpool Cabrio washing machine, you might don’t know where the filter is fitted to the machine. But knowing the location of the filter is necessary if you want to clean the filter.
What happens if you don’t clean the washing machine filter?
If you don’t clean the washing machine filter, you can face some problems using the washing machine. Let’s see what will happen if you don’t clean the washing machine filter.
Do all top load and front load washers have a filter?
Generally, most top load and front load washers have a filter. You might find some washers that don’t have a filter. But most new washers have a filter that will automatically clean the washer.
Does Whirlpool Cabrio washer have a filter?
The Whirlpool Cabrio washer has a filter with it. Generally, the main function of a filter is to keep the washer clean from anything from lint to loose hairs. So, this filter helps the washer to function well and from being clogged. You have to keep the filter clean so that it can work well.
What does it mean when a Cabrio washer doesn't spin?
If your washer does not spin or agitates, it means your drive belt is broken or loose on your Cabrio washer’s pulleys. Replacing this belt will restore functionality to your machine.
How to take a break on a Cabrio washer?
When it’s time for your Cabrio washer to take a break, put the machine in standby mode. You can do this by plugging it in with all indicators off, or by turning on only the clothes clean or done indicator. Once the machine is ready to rest, choose any button except POWER, START, or STOP. Then follow the step-by-step instructions below.
Why is my washer not draining?
However, if it’s not working properly, your washing machine may not drain. A defective lid switch can keep the washer from functioning properly.
Why does my washer lid not fill?
When your washer lid unlocks, it could throw off the calibration, which may cause your machine to overfill or not fill enough. These problems can throw off the wash time and cycle, leaving you with a load of laundry that’s not as clean as you expected, or worse, another load of laundry to do after the first one.
What to do when Whirlpool Cabrio is whining?
The first step is to find a repair manual or diagram of the internal workings of the washer on the Whirlpool site.
Why does my washing machine make a rumbling noise?
There are a number of reasons why this might occur. The washer can emit a rumbling sound while agitating while draining or spinning. Causes might include misalignment of the impeller, imbalance of load, or build-up of lint in the drain pump.
What is the purpose of a spin cycle in a washing machine?
The main function of the cycle is to take the laundry from being soapy and wet, and throw it around in a circle to get it clean. The Cabrio has an excellent spin cycle that can take even the most soaked items and get them clean and dry in no time.
Why does my Whirlpool Cabrio washer stop spinning?
The nut that holds the drive pulley in place can become loose over time. When this occurs it can cause your Whirlpool Cabrio washer to stop spinning. You’ll have to locate the drive pulley and tighten the nut.
Why won't my Whirlpool Cabrio spin?
If your Whirlpool Cabrio washer will fill with water but won’t spin, the lid lock switch is probably bad.
How to remove a washer motor?
If the nut on the direct drive motor becomes loose the OL error code can appear. To check this part, follow these steps: 1 Disconnect the power cord from the wall. 2 Turn off the water supply and disconnect water inlet hoses from the rear of the machine. 3 Pull the washer away from the wall to allow you room to work. 4 Loosen the screws on the access panel so you can remove it. 5 Locate the drive motor and belt. 6 Use an adjustable wrench to secure the motor’s mounting nut. Begin by turning it counterclockwise to loosen the nut. 7 Hold the motor in place firmly and tighten the motor nut by turning your wrench clockwise. 8 Keep one finger on the belt, when the belt can only be depressed about a half inch you have the right amount of tension. This may require 2 people. 9 Reassemble the machine, restore the power, and reconnect hoses.
Why won't my Cabrio spin?
If your Cabrio won’t spin and is displaying error codes such as F7 or E1 you may have a shift actuator malfunction.
What is the most popular model of Whirlpool washing machine?
Whirlpool is a big name in appliances. One of the most popular models of their washing machines is the Cabrio. While this model has fewer problems than most, there are still some common fixes they require sometimes. Today we’ll take a look at all the common problems with Cabrio washers and the related fixes.
What happens if a washer doesn't run with the lid closed?
If the washer runs while you do this, but won’t run with the lid closed – the switch is bad. When you do this test and don’t get a result it may be necessary to check for continuity using a multimeter.
What to do if washer doesn't drain?
If your washer still doesn’t drain, remove the hose that runs from the pump to the drain. Make sure this hose is free from debris and blockages. If your pump is getting power, and no clogs are found it’s best to replace the drain pump motor. You can also use a multimeter to check for continuity inside the drain pump.
What does HE stand for in Whirlpool Cabrio?
Whirlpool Cabrio is an HE washer, and therefore needs HE detergent. HE stands for “High Efficiency .”. Detergents that are graded as HE are capable of delivering cleanliness without causing residue. They also tend to be more environmentally-friendly, making it a doubly awesome detergent choice.
What are the problems with Cabrio washers?
The most common include a washer that doesn’t spin, a washer that doesn’t fill correctly, bearing problems, as well as specific error messages on the computer board.
What does the back of a laundry detergent bottle say?
On the back of the laundry detergent bottle, it always states that the “suggested” dose is a capful. Think rationally. If the detergent keeps getting increasingly concentrated but the doses remain the same, you’re going to eventually add too much detergent. This is an intentional act from detergent companies.
Is Whirlpool washer energy efficient?
Whirlpool washers are good, but they are made to be energy-efficient. This means that their rinse cycles are not always going to have enough water to rinse off excess detergent by default. If you recently changed washing machines and started to notice this issue, then that’s why.
Can you use fabric softener in a Whirlpool washer?
If you want to learn more about using fabric softener with your Whirlpool, refer to How To Add Fabric Softener To Whirlpool Washer Without An Agitator. Doing your laundry right is something that you should learn as soon as possible. It helps you avoid issues with your clothing and can even prevent acne from detergents.
Does Cabrio laundry detergent have an AFfresh cycle?
The Cabrio also has an “Affresh” cycle that works wonders for this issue. To prevent this from happening again, you should use the *real* amount of laundry detergent that is right for you. Unfortunately, chances are high that you’ve been misled about the real amount of laundry detergent each load needs.
Why is my Whirlpool Cabrio washer so loud?
Truth be told there could be many reasons for why your Whirlpool Cabrio washer is making so much noise. The best way to avoid washer noise is to buy one of the quietest washing machines to begin with. Whirlpool Cabrio washers are popular but they have some common problems.
What specific noises does a Whirlpool Cabrio washer make and what does it mean?
A worn out clutch assembly is the most common cause of banging noises. If your Whirlpool Cabrio washer is making this sound, then you should check out the clutch assembly. Replacing the clutch assembly is advised.
Are Cabrio Washers Loud?
They're probably no louder than most other washers but they can make some loud noises when one of their components begin to fail. You can make your Cabrio washer quieter though if you identify the part that is making the noise.
What is the LCD panel on a Whirlpool Cabrio washer?
The LCD panel on Whirlpool Cabrio washers displays the stages of a cleaning cycle. The panel also lights up like a Christmas tree when there is a problem. Sometimes it is a series of letters and numbers; sometimes there are flashing lights accompanied by cryptic beeping sounds.
What does UL mean on a washer?
uL is displayed when the machine/motor control detects an off-balance load and remains on while the washer runs a mini-cycle to rebalance the load.
Why is my washing machine basket not engaging?
This may signify excessive detergent usage, the basket cannot engage during drain step, or mechanical friction on drive mechanism not allowing the basket to engage.
How to clear the display on a washing machine?
Open the lid to clear the display, remove excess laundry, then restart the cycle.
Can you put your hands on a washer manual?
You can consult your owner's manual for a clear explanation of the display. Can you put your hands on your manual? Probably not . You can get a new manual or simply follow this chart to see what the codes mean and some items to check that may help you get the washer running again.
How Do You Use The Whirlpool Cabrio Reset Function?
If the idea of spinning around a dial like a super spy doesn’t appeal to you, then there’s another method that you can use to properly reset your Whirlpool Cabrio. Most washers in the Whirlpool Cabrio line will respond to a built-in reset function. To do it, follow these instructions below:
Why does my Whirlpool Cabrio keep glitching out?
There are plenty of reasons why you might want to reset your Whirlpool Cabrio washer. The most common reason is because you keep getting an error message or because your washer is glitching out.
When Should You Reset Your Whirlpool Cabrio?
Of course, if there’s anything going on with your washer that you can’t quite pinpoint, a reset will be a smart move for you to do.
What Problems Will Resetting Your Washing Machine Fix?
When you reset a machine, you’re able to get rid of data-related or electrical-related issues. That’s why a lot of problems involving error messages “magically” go away when you reset a machine.
Why is my washing machine leaking water?
The washing machine or dryer was damaged by inclement weather or another insurance-backed reason. If you have a dryer that is insured, call a repairman and take photos to make sure that you can get your repairs paid for. Water is pooling around your machine. This is indicative of a leak.
How to clear error code on Cabrio?
Go to your display pad and touch any button you see there. This sends a signal to your Cabrio to clear the error code. You can also press “PAUSE/CANCEL” if you feel more comfortable doing that.
Is the Cabrio a good product?
The Cabrio is deemed to be one of the highest-rated products when it comes to garment care and ease of use. If you are a fan of excellent energy-efficiency and reliability, then you’ll find the Cabrio to be a great pick.
The Importance of Cleaning Your Washer
The buildup of sticky, detergent residues, bacteria, and molds from your clothes will begin to occur when you wash your clothes many times a week. You need to clean your washer for a variety of reasons, and I’ve highlighted three of the most important ones below.
How Do I Reset My Whirlpool Washing Machine?
Resetting your Whirlpool washing machine is as simple as following these steps:
Washer Leaves Deposits on Dark Clothes
No matter what detergent you use, your washer leaves white deposits on your clothes.
How many cu.ft. is a washer?
With washers from 4.8–5.3 Cu. Ft. and dryers at 7.4 Cu. Ft., these models are roomy enough for your bulkiest loads. You can wash and dry the entire family’s towels in a single load.
Can you wash soccer jerseys in the washer?
Now you can pre-wash clothes, like post-game soccer jerseys and those pants that took a PB&J smear, right in the washer. The built-in water faucet’s instant water stream lets you remove soils with less hassle and pretreat stains before they set in.
