The anti-tip bracket is a device used to prevent the stove from tipping over. It attaches to the back of the stove and to the floor. If you don't know how to install anti tip bracket for stove properly, it could be very dangerous.
What is an anti tip bracket on a range?
An anti-tip bracket is a small metal bracket that is attached to the rear of a range to prevent it from tipping over. Anti-tip brackets became a requirement to be sold with new ranges in 1991 due to injuries resulting from ranges tipping over and causing significant injury and death.
How do I know if my anti tip bracket is installed correctly?
HOW TO DETERMINE IF THE ANTI-TIP BRACKET IS INSTALLED CORRECTLY: There are two methods to check the anti-tip bracket. This method can be used on 30" Electric Ranges with removable drawers. It does not apply to gas ranges, drop-in ranges or electric ranges with double ovens or warming drawers. Remove the drawer and shine a flashlight into the space.
Do all home inspections include an anti-tip bracket?
However, this bracket is not found on roughly 90% of all home inspections where a range is present. An anti-tip bracket is a small metal bracket that is attached to the rear of a range to prevent it from tipping over.
How much does it cost to get an anti-tip bracket?
We will ship you the bracket for your range at no charge. We will also need to mail, email or fax a copy of the installation instructions for the anti-tip bracket. HOW TO DETERMINE IF THE ANTI-TIP BRACKET IS INSTALLED CORRECTLY:
Is anti-tip bracket necessary for stove?
Anti-tip brackets have been required since 1991; however, concerns have been raised that, despite the brackets being made available, they require special installation procedures which homeowners and/or installers may disregard.
How do you install an anti-tip bracket on a stove?
3:165:06Electric Range Installation with Anti Tip Bracket - YouTubeYouTubeStart of suggested clipEnd of suggested clipBracket slot place the outside of your foot against the bottom front of the oven. Door to keep theMoreBracket slot place the outside of your foot against the bottom front of the oven. Door to keep the range from moving and grasp the right or left side of the control panel attempt to tilt the range.
How do you move an oven with an anti-tip bracket?
1:115:38How To: Frigidaire/Electrolux Anti-tip Bracket Kit 316112005 - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere's an adjustable leg on each side of the back of the range. That you can adjust to raise.MoreThere's an adjustable leg on each side of the back of the range. That you can adjust to raise.
Do GE ranges come with anti-tip bracket?
All of our freestanding, slide-in and drop-in ranges manufactured since the Fall of 1988 include an anti-tip device. This bracket is essential to the safe operation of the range.
What is an anti tip bracket?
Anti-tip brackets are safety devices that prevent freestanding stoves from tipping. These devices attach the stove to the wall and are included in every installation kit. Believe it or not, tipping stoves used to be a big problem. Incidents usually resulted in death or serious injury.
How to tell if a stove has an anti-tip?
To determine if your stove has an anti-tip bracket installed, use a flashlight to look behind the stove. A wall-mounted bracket may be visible depending on the model. On some models, the anti-tip bracket may be more difficult to see. If the anti-tip bracket is not visible, firmly grasp the top of the stove and attempt to tip the unit.
Can you install an anti-tip bracket on a stove?
If your stove does not have an anti-tip bracket installed, it is recommended that one be installed. Anti-tip brackets can be purchased from hardware stores or the manufacturer. Some manufacturers, like General Electric, will send their customers an anti-tip bracket for free. If playback doesn't begin shortly, try restarting your device.
Can a falling stove scald?
A falling stove can easily crush, scald, or burn anyone caught beneath. Of the people killed or injured by tipping stoves, most of those victims were children. In 1991, regulations were introduced by UL and ANSI requiring anti-tip brackets to be included in every installation kit.
How to check for anti tip bracket?
There are two methods to check the anti-tip bracket. Visual Method. This method can be used on 30" Electric Ranges with removable drawers. It does not apply to gas ranges, drop-in ranges or electric ranges with double ovens or warming drawers. Remove the drawer and shine a flashlight into the space.
How to contact GE Appliances for anti-tip?
There will be a charge for service. If you would like to install the bracket yourself, but you do not have the part please call 1-800-626- 8774. We will send the anti-tip bracket at no charge.
What is the phone number for a slide in range?
If missing, we will furnish anti-tip devices with all of our freestanding, slide-in and drop-in ranges at no charge. Please call 1-800-626-8774 if you do not have a bracket for your range. We will ship you the bracket for your range at no charge.
How to contact a dealer for an anti-tip bracket?
For dealers/builders/contractors who are missing brackets, please call 1-800-626-8774. We will send the anti-tip bracket at no charge.
What is the WB2X7909?
The Range Anti-Tip Kit (part # WB2X7909) can be used on range models manufactured prior to the Fall of 1988 if an anti-tip device is not listed in the parts list. It can be ordered by calling GE Appliances Parts at 1-877-959-8688.
When did anti-tip devices become a UL requirement?
Anti-tip devices became a UL requirement June 3, 1991. Our installation instructions require that ranges so equipped must be installed with the anti-tip device that is supplied with the range, and there is a warning label on the edge of the open oven door.
Do we really need these?
Anti-tip brackets are safety devices that started showing up in the late 1980s and became required by appliance manufacturers in 1991. According to the Consumer Product Safety Commission, there were 38 fatalities associated with ranges tipping over between 1980 and 2008.
So back to question: are these required?
As I mentioned earlier, anti-tip brackets are required by manufacturers, but does this mean that they’re required by the building code? Indirectly, yes. If we turn to chapter 3 of the Minnesota Mechanical Code, we can find the following text under section 304.1:
What is a Range Anti-Tip Device and Why is it so Important?
Also called a range safety clip, these devices secure fee-standing ranges to the floor or back wall, preventing them from tipping when the oven door is open and/or an oven rack with weight on it is pulled out. Think of these situations:
What is a Range Anti-Tip Device and Why is it so Important?
Also called a range safety clip, these devices secure fee-standing ranges to the floor or back wall, preventing them from tipping when the oven door is open and/or an oven rack with weight on it is pulled out. Think of these situations:
