What is an ejector pit in a sewer line?
An ejector pit collects inside water from below grade bathrooms, laundry, floor drains, humidifiers and HVAC condensation drains. There is an ejector pump inside that is supposed to pump that waster material into the raw sewerage.
What is the difference between an ejector pit and pump?
An ejector pit collects inside water from below grade bathrooms, laundry, floor drains, humidifiers and HVAC condensation drains. There is an ejector pump inside that is supposed to pump that waster material into the raw sewerage. Are the pumps the same? No, they are different.
What is pit (perineural injection therapy)?
Perineural Injection Therapy (PIT or Lyftogt Technique) The number of injections that are given depend on various factors such as the number of different nerves inflamed, how much of the nerve is inflamed, and how long the nerve has been inflamed. For instance, in a patient that has had a total knee replacement,...
What is a PoE injector?
PoE injector excels in sending data while providing PoE to standard-based PoE, PoE+, and PoE++ compliant devices. In a practical application scenario, a PoE injector functions as an intermediary to connect non-PoE switch and PoE compliant devices. The devices like IP cameras or wireless access points will be powered by the PoE injector.
What is PIT therapy?
What is a PIT?
How long does it take for pain to go away after a syringe?
How many small injections are needed for superficial nerves?
Does Pit help with pain?
Does dextrose help with nerve pain?
Can you continue PIT therapy?
See 2 more
What is a PIT?
Perineural Injection Therapy (PIT) is a proven safe, effective treatment for patients who may not be candidates for joint replacement surgery or biologic options such as stem cell injections or PRP. Perineural injection therapy treats inflamed and injured nerves. Chronic nerve pain is often due to trauma, arthritis, sports, overuse, occupational, ...
What is the role of nerve endings in tendons?
Nerves endings that become entangled in scar tissue that develops in tendons such as the achilles or patellar tendons become chronically inflamed and are thought to play a major role in pain that develops from those overuse injuries.
How long does it take for a perineural injection to work?
Most patients will require 4-6 Perineural Injection Therapy treatments spaced anywhere for 7-10 days to 2-4 weeks apart depending on their condition. No pain meds or local anesthetics are required. After the first Perineural Injection Therapy treatment, the pain relief only lasts a few hours and the pain returns.
What nerves are inflamed when you have surgery?
The end of the nerve that terminates in the skin and tissue immediately beneath it easily becomes inflamed. A nerve such as the saphenous nerve can also become inflamed as a result of surgery in the knee when part of the hamstring is used to create a graft for ACL repair.
What happens when a nerve branch moves back and forth?
When a nerve branches it came become inflamed. When it moves back and forth over the surface of a bone, it can become irritated and inflamed such as in ITB friction syndrome, which produces knee pain in runners and cyclists.
What happens when a nerve is injured?
If the nerve is injured for whatever reason, this mechanism is disrupted. The nerve cell signals the brain that things aren’t working right by producing substances that cause pain and these slip out of the cell and let the brain know something is amiss. Biologically these substances are known as Nerve Growth Factor (NGF), ...
Where are the nerves located in the back of the pelvic bone?
These nerves are located in the back of the pelvic bone above the gluteal muscles, at the waist and are a frequent source of low back pain.
What is the difference between a sump pit and an ejector pit?
A sump pit collects outside/ground water that may enter the basement through cracks or gaps in the floor or wall. There is a sump pump inside the pit that is supposed to pump that water to the exterior of the house or into a storm sewer. An ejector pit collects inside water from below grade bathrooms, laundry, floor drains, humidifiers and HVAC condensation drains. There is an ejector pump inside that is supposed to pump that waster material into the raw sewerage.
Can an ejector pump discharge any solid?
No, it is important that only fecal matter and toilet paper get flushed down toilets that utilize the ejector pump. Items that may be common to flush down most toilets such as cottons, nylons, dead animals and other materials that I just don’t feel comfortable mentioning here may damage these pump and should not be flushed down these toilets.
Does every home need a sump pump?
Not necessarily. Every home is different. Water seeks it own level. There is water beneath the entire Chicagoland area. Depending how deep your basement/crawlspace is and how well the area around your home drains away rainwater you may not need one at all. But me, I am one of those better safe than sorry guys. I do believe that every home should have a sump pump. I should also confess, that when I do inspections in older homes that do not have sump pits, AND I don’t see any signs of water entry, it is hard for me to justify someone spending close to $3,000.00 ($10,000 for the larger companies that you see their advertising) for a water control system. We recently gutted and rebuilt our home. Our basement only received water one time and I swear it rained so hard, I was looking for Noah’s ark. We did install a perimeter drain tile and a sump pit. That thing went 9 months without a pump in it during construction. It is still bone dry. I honestly don’t think is will ever be needed again, but it is there should the great tidal wave come.
How do underground sewers work?
The two methods are underground sewers and overhead sewers. Underground sewers work by gravity. If your home has the main drains going down into the floors, you have underground gravity sewers. If your drains go out through the wall of the foundation, then you will most likely have overhead sewers. Post navigation.
What is below grade in Chicago?
Most of the homes in the Chicagoland area have below grade areas such as basements and crawlspaces. Since these areas are below grade, any water that gets to these areas needs to be pumped out of the area and properly disposed. Sometimes it is easier to answer a few of the more common questions I get during a home inspection.
Do sump pumps have a screen?
No, they are different. Since only rain water is supposed to go into a sump pit, the sump pump will have a screen/strainer on the bottom to prevent debris from getting into the pump and damaging the impellers. Ejector pumps are designed to take solid waste like fecal matter and toilet paper, grind it up and pump it out.
How does PIT stop chronic pain?
The inflammatory agents can cause the surrounding nerves to become hypersensitized and chronically irritated. Treating the nerve with a calming solution allows the painful nerve to reset and the cycle of pain to stop.
What is the science behind the process?
Hypersensitivity of C nerve fibers cause chronic pain responsible for aches, burns, tingling, and sharp pain. This creates a pain cycle due to production of damaging proteins even after the initial injury heals. PIT injections stop the cycle of pain by turning off nerve sensitivity and release of damaging proteins. This reset allows the body to restore proper balance and communication between the nerves and brain.
What to expect?
The painful area and responsible nerve (s) are identified and marked. The skin surface is cleansed. Near nerve injections are performed with the goal of immediate reduction in pain. A standard course of perineural subcutaneous injections is 4-6 sessions spaced 1-3 weeks apart.
What is in the PIT solution?
The most common natural agents include dextrose, mannitol, or glycerin.
What happens when a sump pump fails?
If a sump pump fails or is overwhelmed, the basement will flood; they typically have battery back-up pump systems alongside.
What is a sump pump?
Sump pumps and ejector pumps are both important parts of a home’s water management system and a malfunction of either can create a destructive mess.
How many inlets are there in a sump pump?
Typically, there will be two inlets in a sump basin that connect to either end of a drain tile system, either interior or exterior. Water collected by the drain tile flows to the sump basin and accumulates there until the level rises high enough to trigger the sump pump’s float switch.
Where does the ejector pump collect water?
Rather than collecting ground water from drain tile, the ejector pump’s basin will accumulate water from floor drains, “ grey water ” from a washing machine and/or “slop sink” or, when the home has a below-grade bathroom, waste water.
Where is the second sump pump located?
In many homes, though, particularly in those with finished basements, there is often what appears to be a second sump pump, often located near the washer and dryer. It is often identical, or at least very similar, to the other sump pump and some homeowners are perplexed as to why it’s there and what it does. In fact, this second pump is usually an ...
Do you need a basement waterproofing contractor?
So, no matter if your home has one or two pumps in the basement, a professional basement waterproofing contractor should be your “go-to” for installation, maintenance or repair. At U.S. Waterproofing, we’ve installed thousands of high-quality sump pumps since our founding in 1957 so why not ask for our free advice?
Do you need a sump pump in a basement?
In most parts of the country, homeowners are used to having a sump pump in the basement. They’ve been around a while (as many homes with the old pedestal-style pump will prove) and they play an important role in keeping a basement dry. In many homes, though, particularly in those with finished basements, there is often what appears ...
What is sewage ejector pump?
The principle of a sewage ejector pump is similar to how a groundwater sump pump operates, but instead of rainwater seepage being pumped out of the home, it is waste/sewage being lifted up and out into the main sewer lines or septic field.
How big is the outlet pipe for a sump pump?
The outlet pipe leaving the sewage ejector pump is usually 2 inches in diameter, connecting to the 3-inch main sewer line. Between the pump outlet point and the junction with the main sewer line, there is always a check valve to make sure that nothing drains back into the sump basin after the wastewater is pumped out.
What is a sewage pump?
A sewage ejector pump, also called a pump-up ejector system, is used when a bathroom, laundry room or any other type of plumbing fixture is located below the level of the main sewer or septic line flowing from the house. The flow of drain-wastewater depends on gravity, so any plumbing systems in which fixtures are located below the level ...
Why do you need a vent in a sump pit?
A vent is required for a sewage ejector pump installation to equalize pressure during pumping and to provide an outlet for sewer gasses. The vent comes out of the sump pit and is either connected to an existing vent (soil) stack or runs up and through the roof.
How many gals does an ejector pump need?
For the average residential installation, a standard pump kit with a 1/2 to 3/4 horsepower motor and 30- or 40-gallon is usually enough, but you can compare prices, specifications, and features to make sure you pick the system appropriate for your project.
Where are ejector pumps found?
Ejector pumps are also very common in septic drain-field systems, such as are found in rural locations where the septic drainage field or holding tank may be considerably higher than basement plumbing fixtures.
Does sewer wastewater need a pump?
The flow of drain-wastewater depends on gravity, so any plumbing systems in which fixtures are located below the level of the main sewer line all require a pump or some means of elevating the wastewater so it can flow down and out properly.
What Is a PoE Injector?
A PoE injector, also called midspan or PoE adapter, can be implemented to make a non-PoE compatible switch work with PoE devices by powering compliant devices over a single Ethernet cable.
What type of Ethernet cable is used to connect to a PoE device?
Normally, Ethernet cables like Cat5, Cat5e, Cat6, etc. are all available to connect between the injector and the PoE devices/network switches.
What are the benefits of PoE?
PoE adapter benefits are presented as follows: 1 Ease of installation: simply connect the PoE injector to the PoE endpoint and to an Ethernet switch to provide data and power. 2 Flexible to network expansion: PoE injectors add PoE capability to non-PoE Ethernet switches, which extends the network connection distance and provides combined power and data over Ethernet cable to end devices for a better connection. 3 Minimal investment budget: Utilizing the existing Ethernet equipment and cabling infrastructure, the relevant costs will be minimized in a PoE injector solution.
How to connect IP camera to PoE injector?
Make all video and network configurations before mounting the IP camera. 2. Plug the Ethernet cable into the PoE injector's Power or PoE port and into the IP camera's PoE port. 3.
How many volts are in a PoE injector?
PoE injectors can mainly be divided into 12V, 24V, and 48V according to the output power voltage they can provide. When purchasing a PoE injector, you need to consider the voltage of it with the voltage standard of the PoE device which needs to be powered.
How many volts does a security camera use?
Power supply voltage: Make sure your PoE injector's voltage is compliant with your powered devices. For example, most of the security PoE cameras use 12 or 24 volts. Always check the specification of your PoE injector power supply to match the ones in your cameras to avoid overloads or operating issues.
What voltage is a passive PoE?
Passive PoE devices usually run on 18 to 48 volt s DC. If the wrong voltage is connected, it may cause permanent electrical damage to the device.
What is PIT therapy?
Areas typically treated include the nerves in the arms, legs, back and face. Additionally, the therapy may assist healing of common musculoskeletal conditions such as tennis elbow , golfer’s elbow, ...
What is a PIT?
Perineural injection therapy (PIT) is a treatment for inflamed nerves. It uses a weak solution of dextrose to calm down inflamed or injured nerves. It is used on chronic and acute injuries to promote healing.
How long does it take for pain to go away after a syringe?
Many people report partial or full immediate relief of pain within 15-30 min following the procedure. However, this is not the case in all patients and occasionally one will experience increased soreness for 1-2 days following the procedure.
How many small injections are needed for superficial nerves?
Several points along the nerve are treated and a typical treatment session may consist of only a few or as many as 20-30 very small injections.
Does Pit help with pain?
Most pain conditions will be at least partially relieved by PIT. However there are some patients that do not respond to this therapy. If there is no response by the 3rd treatment, an alternative therapy will be suggested. Patients have reported that PIT has relieved pain in both acute and chronic injuries, including aborting migraine headaches.
Does dextrose help with nerve pain?
Low concentrations of dextrose act directly on the nerve membranes to immediately calm down nerve inflammation. This not only relieves pain, but allows the nerve to function better and heal underlying injuries. All injuries, whether related to nerves, muscles, tendons or joints have some component of nerve dysfunction.
Can you continue PIT therapy?
If doing PIT as a solo therapy, you may continue all your usual medications . If PIT is in addition to other therapies, please refer to those therapies specifically for medication restrictions.
