What is an inline blower motor?
An inline blower, sometimes called an inline blower motor, inline fan, or a remote blower, is a type of remote blower that is not in the hood itself but positioned inside your ductwork, between the range hood and the end of your ducting. These blowers are less expensive than local blowers.
Why are inline blowers important for your home?
They are especially important in bathrooms and kitchens where moisture and humidity levels are very high and accumulate quickly. A very efficient, healthy and flexible option when it comes to ventilation is inline blowers. They exhaust all the moisture, steam and bad odors and keep your house healthy and aerated.
What is an inline blower on a range hood?
An inline blower is a type of remote blower, meaning it is separate from the range hood. What is a local blower? A local blower is a blower directly inside your range hood; it is also called an internal blower.
What is an internal blower?
An internal blower is located in the hood itself. The unit is fully self contained. You will have the hood, blower motor, filters, fan controls and lighting all in one box. Noise is always a concern with buying an internal blower. Internal is noisier than the other types, especially the higher CFM units.
What is the difference between external and internal blower?
An internal blower is located inside the vent hood, it's like an internal organ. An external blower is located outside the house, either on the roof or on an outside wall. Because they are located outside of the vent hood, both inline and external blowers give you a quieter exhaust hood.
What is an external blower for a range hood?
An external blower is a box containing a ventilator, filter and a motor for ventilating air from a cooking stove. It can be placed outside the house and connected to the range hood with ducts that run through the wall. Alternatively, it can be placed in the house, deep into the walls.
Can you use an inline fan for a range hood?
Most inline blowers can simply be wired to the existing hood, and you don't need to change the control buttons. However, other range hoods have separate controls that you will have to mount to the existing range hood.
What is a blower in a vent hood?
0:442:10Remote Blower Vs. Local Blower - Different Blower Types - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first is a local blower that means the blower is installed right here. Inside your hood now theMoreThe first is a local blower that means the blower is installed right here. Inside your hood now the second type of blower is a remote blower. Now those can be located either in line with your ductwork
Do I need a blower for my range hood?
A blower, or exhaust fan, is a very important part of a fume hood system. It is the component that moves air through the fume hood. Many people are under the impression that all fume hoods come with a built-in (or integral) blower. A built-in blower is mounted right above the fume hood.
Do range hoods have to be vented outside?
Do range hoods have to be vented outside? No; range hoods without a duct, or ductless range hoods, can recirculate air back into your kitchen. However, to clean your kitchen air most efficiently, purchase a ducted range hood. Rather than relocate the cooking exhaust, it will evacuate it from your home entirely.
Do All kitchens need extractor fans?
In short – yes, you do need an extractor hood. Since April 2006, building regulations state that extract ventilation must be fitted in a kitchen which has been built from that date onwards. A kitchen will meet these regulations if the unclean air is extracted externally.
How do you install an inline kitchen exhaust fan?
3:546:51How To Install a Vex Air In-Line Blower - ProLine Range HoodsYouTubeStart of suggested clipEnd of suggested clipRight here in the line of the ventilation. So in order to mount it take your fork grab our screws.MoreRight here in the line of the ventilation. So in order to mount it take your fork grab our screws. You have your four holes in the bracket. I'm simply going to want to screw them in mount like.
How can I make my inline fan quieter?
0:225:17Tips for fan noise | most quiet duct fan sound grow room indoor - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what are the easiest things that you can do to quiet your band is to put it in a box. So we'reMoreSo what are the easiest things that you can do to quiet your band is to put it in a box. So we're going to show you just using a very simple cardboard box this principle. In action.
What is a Magic Lung blower?
The powerful Magic Lung® blower traps all cooking contaminants, liquefies grease vapor, and removes heat-polluted air. The Magic Lung® blower combines sufficient air pressure and constant speed with centrifugal filtration.
How do you install a hood blower?
1:484:41How to Install a Range Hood | The Home Depot with @This Old HouseYouTubeStart of suggested clipEnd of suggested clipInsert it through the wall from the outside. And screw the metal hood into the mounting. Block.MoreInsert it through the wall from the outside. And screw the metal hood into the mounting. Block. These self-tapping screws go right through the metal hood and into the block.
How do you clean a vent hood?
0:102:55Cleaning Vent-A-Hood Ventilation | #QuickTips from ShowplaceYouTubeStart of suggested clipEnd of suggested clipThe blower housing snaps off a little buckle on both sides of the housing. You kind of tilt it down.MoreThe blower housing snaps off a little buckle on both sides of the housing. You kind of tilt it down. And toward you as you pull it out of the liner. You can wipe the grease out of the housing.
Why are inline blowers important?
They are especially important in bathrooms and kitchens where moisture and humidity levels are very high and accumulate quickly. A very efficient, healthy and flexible option when it comes to ventilation is inline blowers. They exhaust all the moisture, steam and bad odors and keep your house healthy and aerated.
What is Vortex fan?
Vortex Fans – which offer fans, motors for DIY aficionados, accessories and all sorts of kits. While most fans are electric, some of their fans run on fuel. Some other brands are: Elicent, an Italian one, NuTone, which sell a great bathroom upgrade kit, Suncourt, Broan, HVAC Quick, Hydrofarm and Lowes.
What does it mean when a fan has a combination of cold air and high air density?
The combination of hot air and low air density means that less air mass will be transported through the fan; The combination cold air and high air density means more mass ; Equal speed and dimensions means that the volume of the flow will remain constant.
What is a cross flow fan?
Cross-flow fans, through which the air flows inwardly and then outwardly, in a radial direction. Ducted fans, which are used for aircrafts, such as planes and jets. They are electric in operation and have a higher thrust-to-weight ratio by design.
Can you put a fan in a leaf blower?
It will help reduce the unwanted heat, keep the moisture and steam away and allow you to have perfect control over the temperatures in there at all times. Fans can also be installed into leaf blowers, as a duct booster fan to the machine’s capacity.
Can you use a 6 in fan instead of a 4 in fan?
So instead of a 4in fan you could go with a 6in one, because the sound, which is now completely in your control via the speedster, will be much more toned down. Use a duct silencer. If you use it between the carbon filter and the fan itself you will indeed notice how the sound will reduce significantly.
Where is the internal blower located?
Internal Blowers. An internal blower is located in the hood itself. The unit is fully self contained. You will have the hood, blower motor, filters, fan controls and lighting all in one box. Noise is always a concern with buying an internal blower. Internal is noisier than the other types, especially the higher CFM units.
Where to place in line blower?
It must be placed inside the house but somewhere in the run of ducting. You need to place the blower in either a basement or attic.
How much CFM does an external blower blow?
Since the blower is further away they are somewhat quieter although you do hear the exhausted air. External will be the most powerful option, up to 1,500 CFM. External blowers, however, are relatively large. Placing one on the outside or roof presents challenges.
What is venting correctly?
First, venting correctly is about a good plan using the right hood, duct and a powerful enough motor. I personally like the internal blower, because it is easy to maintain and service. All three, internal, in-line and external will work with the right plan.
Where do I put a blower?
You need to place the blower in either a basement or attic. They cannot be fully enclosed and need to be accessible if you ever need to service them. In-line blowers can be pretty powerful, they usually range from 600 to 1,100 CFM. The real downside of in-line is its relative newness.
Can you service a blower motor in bad weather?
If you need to service the unit for any reason, especially in bad weather, it can be difficult. You will also need to find a way to enclose the blower. These motors, as pictured, are relatively large and have an unfinished aluminum look to them, so you should place them out of sight lines.
Why do inline fans work?
Because inline fans work with your ducting, they’re a much better option for connecting the extraction point to the outlet if these two points are far away from one another. For example, if you need to connect the fan from your bathroom to your roof vent, but the distance is quite far, a standard booster fan won’t be the best choice.
How do booster fans work?
Booster fans help circulate the air through the ductwork. They boost the airflow in a room, which increases how much warm and cold air makes it into a room. The inline duct fans do not rest on the ceiling. They are attached to the ductwork inside the ceiling or attack and are located further away from the room.
Do inline fans make noise?
But with inline duct fans, noise is no longer an issue. Because they are located within the ducting inside the attic space, they aren’t close to the room that they are being used for. This significantly decreases the noise level of the fan. For those with well-insulated roofs, the noise will almost become non-existent.
Do you need an electrician for inline duct fans?
Because of this, in some instances, an electrician may be required for installation.
remote vs. in-line blowers on kitchen vents
Does anyone know if remote blowers are quieter than in-line blowers on kitchen vents. Is this an automatic thing or will it still depend on the make and design?
Comments (15)
I'd think an inline blower is low cost. I got one. I built all the rest around it.
