What is the apron of a building?
The apron of a building is a slab of material — commonly concrete or asphalt — that is placed in front of the garage door and may extend around the perimeter of the structure. It is a common term in construction.
What is a concrete garage apron?
The apron is between 2 to 6 feet wide and runs the entire width of the driveway and the garage door. At times it may run around the entire perimeter of the garage. Provide a visual demarcation between the garage and the driveway. This is why often it will have a different color. Sometimes the concrete garage apron may even have a stamping on it.
What are the characteristics of apron slabs?
The apron slab should have a raised edge, therefore, and a slope that ensures water is directed to the lowest point at the edge of the slab. Here it is collected by a drainage channel (or pipe) that can carry the water away to a safe disposal point. Raised edge to the apron slab
How do you use apron slabs for drainage?
Draining spilt water. The apron slab is designed to collect spilt water and rainwater. This water needs to be carried away from the slab and not run off onto surrounding soil. The apron slab should have a raised edge, therefore, and a slope that ensures water is directed to the lowest point at the edge of the slab.
What is an apron in concrete?
A concrete apron, also known as "an approach," is a section of concrete inserted in one of three places: In front of a garage. Around the perimeter of a building. The entrance to a parking lot or driveway.
What is the apron of a concrete slab?
What Is a Concrete Apron? If your asking yourself what a concrete apron is, it would be the first 2-6 feet of concrete between your garage floor and the driveway. This area is often asphalt and is sunk well below the garage floor.
What is the meaning of apron in construction?
An apron is a raised section of ornamental stonework below a window ledge, stone tablet, or monument.
What is the apron on a house?
The apron, also known as the approach, is the part of the driveway closest to the road and usually made from the same material as the rest of the driveway.
Is a concrete apron necessary?
A concrete apron is important because it provides a necessary transition between the driveway level and the garage floor. The driveway is not always level with the garage floor. Concrete garage aprons are poured in a gradual slope from the driveway to the garage floor.
How thick should concrete apron be?
1026.04 DRIVEWAY APRON MATERIAL AND THICKNESS. All driveway aprons from the pavement to the sidewalk line shall be constructed of concrete paving not less than six inches thick.
What is called apron?
Definition of apron 1 : a garment usually of cloth, plastic, or leather usually tied around the waist and used to protect clothing or adorn a costume. 2 : something that suggests or resembles an apron in shape, position, or use: such as.
What is a apron wall?
[′ā·prən ‚wȯl] (building construction) In an exterior wall, a panel which extends downward from a windowsill to the top of a window below.
What is apron cladding?
Apron Flashings are located at the low end of a curb or penetration. This type of flashing makes a water tight junction, basically forming a right angle which starts up behind the cladding, comes down and out and over the roof.
How do you make a house apron?
0:173:30How to Build a Driveway Apron | This Old House - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo make the cut use a concrete saw fitted with a diamond blade on the first pass make a shallow. CutMoreTo make the cut use a concrete saw fitted with a diamond blade on the first pass make a shallow. Cut then attach a garden hose to the saw.
How do you pour a concrete apron?
4:5321:57How To Form And Pour A Concrete Driveway Apron With A Tench Drain.YouTubeStart of suggested clipEnd of suggested clipDown where we're going to begin and then where the trench strains connect together the seams we'llMoreDown where we're going to begin and then where the trench strains connect together the seams we'll put another pad. Down and then we'll set the trench drain right in the wet. Concrete.
What is paved apron?
Driveway Apron means that portion of any driveway, parking lot, or other hard surfaces, whether paved, poured, laid, or otherwise constituted, which extends from private property onto the travelled portion of the Highway.
What is an apron in a driveway?
The driveway apron is that portion of the driveway within the public right-of-way, generally from the curb section of the roadway to the front edge of the sidewalk, or to the property line. Driveway aprons are for the sole purpose of providing ingress and egress between private property and the public right-of-way.
How do you pour a concrete apron?
4:5321:57How To Form And Pour A Concrete Driveway Apron With A Tench Drain.YouTubeStart of suggested clipEnd of suggested clipDown where we're going to begin and then where the trench strains connect together the seams we'llMoreDown where we're going to begin and then where the trench strains connect together the seams we'll put another pad. Down and then we'll set the trench drain right in the wet. Concrete.
What is a well apron?
A.) A drainage apron is most often a reinforced concrete slab 1 to 2 meters wide which surrounds a well and, because of its slight slope, channels surface water away from the well.
What is apron wall?
[′ā·prən ‚wȯl] (building construction) In an exterior wall, a panel which extends downward from a windowsill to the top of a window below.
Learn the facts about replacing the approach to your driveway so you can conform to community regulations while getting the great-looking curb your home deserves
Most folks don’t give their home’s driveway apron a second thought unless they’re installing a new driveway or repairing an existing one. The apron, also known as the approach, is the part of the driveway closest to the road and usually made from the same material as the rest of the driveway.
Sizing Up Driveway Apron Sizes
Driveway aprons vary in length from about eight to 15 feet (starting at the street and measuring toward the house). Since the apron is a part of the driveway, its width (side to side) is identical to the width of the rest of the driveway—most of the time you can’t tell where the apron starts and the driveway stops.
Understanding Building Codes
Local building codes determine what type of driveway apron can be installed. In most communities, sidewalks, curbs, gutters, and driveway aprons are all regulated by local codes. These areas are considered either public access (sidewalks and aprons) or a part of the community’s storm drainage system (curbs and gutters).
Considering the Curb Cut
A curb cut is where the existing curb is cut away to allow vehicles to enter the driveway. While communities are picky about driveway aprons, they’re even pickier about curb cuts because a system of curbs and gutters is a part of a larger drainage system.
Who Pays?
Some communities will pay a portion of driveway apron installation costs while others require the homeowner to pay the entire amount. Homeowners may be surprised to find they don’t own the apron portion of their driveway yet are responsible for maintaining it.
Evaluating Materials and Costs
Some communities specify the material used in a driveway apron, and this information is available from your local building authority. The cost to build the apron varies, depending on the going rate of labor in your area and whether you can do the work yourself.
DIY Installation Tips
In the majority of cases, it’s best to leave driveway apron construction to the pros, but if you live in a community that permits homeowner construction, the following tips will help you get off on the right foot. Whether you’re doing a poured concrete or paver driveway, you should have a working knowledge of the material you’re installing.
What is a Concrete Garage Apron?
The concrete garage apron is the concrete slab in front of the garage door and is used to transition the concrete or asphalt driveway onto the garage concrete floor. This is necessary as the two surfaces are on two different grades.
Why do you Need a Concrete Garage Apron?
The concrete garage apron is necessary to provide a transition between the driveway level and the garage floor. The driveway is not always level with the garage floor.
How do I make a Concrete Garage Apron?
Preparing the grade and pouring concrete for a garage apron is not much different from pouring a “slab on grade”. Of course there are a few differences. Here is what you need to do.
Bottom Line
The bottom line is that the concrete garage apron is an important link between your garage and your driveway. Specifically it
Flight line
The US military typically refers to the apron area as the flight line.
Tarmac
Some in the general public and news media refer to the apron at airports as the tarmac even though most of these areas are paved with concrete, not tarmac. Specific materials used include asphalt concrete (which itself is often inexactly called "tarmac," adding to the confusion), porous friction course, and Portland cement concrete.
Ramp
In the United States, the word ramp is an older term for an area where pre-flight activities were done; an apron was any area for parking and maintenance. Passenger gates are the main feature of a terminal ramp.
Definition of a Furniture Apron
An apron, as it applies to furniture, is a wooden panel that connects the surface and legs of a table, desk, or sideboard that sits on legs. Some wooden side chairs could have aprons, although most chair legs are attached to the seat.
How to Size an Apron
If you're building a piece of furniture that requires an apron, like a table or desk, you must first decide how wide it should be, from the bottom of the apron to the surface where it is attached.
