What does Feather Finish do?
ARDEX FEATHER FINISH® is an underlayment formulated from a blend of Portland cement and other hydraulic cements that provides a smooth, permanent finish for a variety of substrates prior to the installation of today's demanding floor coverings, including sheet vinyl and VCT (vinyl composition tile).
How long does ARDEX FEATHER FINISH take to dry?
Allow thorough drying to a clear, thin film (min. 3 hours, max. 24 hours). NON-POROUS SUBSTRATES: ARDEX FEATHER FINISH will bond to some non-porous substrates, such as burnished concrete, terrazzo, and ceramic and quarry tile, without the use of a primer.
What does feathering a floor mean?
English translation: applying material to concrete floor to even it before putting in other flooring.
What is ardex used for?
ARDEX CD™ is a concrete resurfacing compound modified with high-performance polymers for exceptional bond strength. ARDEX CD can be used over the surface of existing concrete to produce a new wear layer as well as to fill in small surface defects, such as spalls and gouges.
How thick can ardex feather finish be applied?
ARDEX FEATHER FINISH can be easily applied with a steel trowel, and used at a true feather edge, or up to 3mm in thickness. For thicknesses of 3mm, and not exceeding 12mm, it is recommended to build up in thin applications or alternatively consult the ARDEX ARDURAPID A 45 datasheet.
Can you use ardex feather finish on plywood?
0:001:13Quickly Smooth Plywood Floors In 15 mins with ARDEX Feather FinishYouTubeStart of suggested clipEnd of suggested clipArdex feather finish is ideal for filling in nail holes or smoothing out joints between your plywoodMoreArdex feather finish is ideal for filling in nail holes or smoothing out joints between your plywood. It also helps you create a perfect finish for your soft vinyl floor coverings. Or. Lvts perfect
How do you do ARDEX FEATHER FINISH?
0:111:16ARDEX FEATHER FINISH® Self-Drying, Cement ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipSince its introduction in 1993 ardex feather finish mixes with water only to an ultra smoothMoreSince its introduction in 1993 ardex feather finish mixes with water only to an ultra smooth consistency. No additives are required.
How do you feather floor leveler?
1:276:01Self Leveling Floor Tips for Beginners - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen add two parts feather finish to the water so two parts feather finish one part water then use aMoreThen add two parts feather finish to the water so two parts feather finish one part water then use a standard drill. And a mixing paddle to mix the feather finish up to the right consistency.
Is Henry feather finish the same as ardex?
The Henry Feather Finish is the same stuff as is in this Ardex bag. They are made by the exact same company -just different packaging.
How strong is ardex?
High compressive strength, over 7,800 psi. Exceptional bond strength. Smooth existing concrete prior to installing vinyl and other floor coverings in critical areas. Easy to mix and apply.
How do you apply ardex?
4:099:13ARDEX CD™ Concrete Dressing - Demonstration - YouTubeYouTubeStart of suggested clipEnd of suggested clipMask off all expansion joints with duct tapes to prevent the mix from filling the joints.MoreMask off all expansion joints with duct tapes to prevent the mix from filling the joints.
How long does it take for ardex to set up?
Highly Absorbent Substrates Allow the scratch coat to cure 8 hours for wall tiles and/or 24 hours for floor tiles before proceeding with the tile installation. Prime (interior, dry applications only) Prime with ARDEX P 51™ Primer diluted 1:3 with water, and allow this course to dry thoroughly (min. 3 hours, max.
How long does it take for a concrete countertop to cure?
Curing: Proper curing increases the strength an durability of concrete. Curing should be started as soon as possible and should continue for a period of 48-72 hours. Countertop Mix should be moist cured by covering with plastic sheeting.
Can ardex be painted over?
All oil, grease, wax, dirt, chemicals, asphalt, latex and gypsum compounds, dust, paint, or any contaminant which might act as a bond breaker must be completely removed before installing an ARDEX underlayment or topping.
Can I use ardex feather finish on walls?
ARDEX PANDOMO® W1 is a self-drying, trowel applied finishing compound for walls and ceilings. ARDEX PANDOMO W1 has excellent adhesion over a wide variety of porous surfaces, including concrete, gypsum plaster, drywall and all types of masonry surfaces.
Is Henry feather finish the same as ardex?
The Henry Feather Finish is the same stuff as is in this Ardex bag. They are made by the exact same company -just different packaging.
Concrete Countertops: All you Need to Know About Ardex Feather Finish
Ardex Feather finish aka Concrete Countertops. Have you heard about them? Have you been intrigued to give them a try? I’ve had these Ardex Countertops in my kitchen for the last four years, so I want to break down what they are, how they look, how they hold up, and all questions I get about them.
All you Want to Know About Ardex Feather Finish Countertops
Click, here and you’ve got the best shopping experience for purchasing Ardex. I’ve ordered multiple bags over the years…which I’ll get to in a second.