Full Answer
What is briwax made of?
. Briwax is a solvent based blend of beeswax and carnauba wax. Briwax has long been recognized by furniture restoration professionals as a premiere, multi-purpose furniture wax. It produces a lustrous patina, not a glossy surface shine.
Can you use briwax on bare wood?
JaLea explained the solvent not only blends the waxes but also serves as a gentle cleaner to remove grime from existing finishes. Briwax Original can be used as a stand-alone, easy-to-repair finish on bare wood or as a protective final coat over another finish.
What is the difference between briwax and sheradale wax?
Sheradale Wax contains a blend of waxes, plus paraffin, which provides higher water resistance and sheen than Briwax Original. It’s a good polishing option for lacquer and other film finishes.
Is there a difference between briwax stain and sealer?
No Briwax is designed for interior use only. What is the difference between using a stain and sealer compared to Briwax? Briwax cleans, stains and polishes all in one easy step. No waiting for stain to dry and then applying several coats of sealer. The beauty of Briwax is a hand rubbed lustre is achieved after 5- 10 minutes.
What does Briwax do?
Known as “The World's Premier Finishing Wax“. BRIWAX is a blend of beeswax and carnauba wax, two of the finest waxes known to man. BRIWAX is designed to protect raw wood and can be applied to virtually any existing finish. Use BRIWAX on all woods, untreated leather, marble, concrete, metal and painted surfaces.
How long does Briwax last?
six to twelve monthsIf this fails a fresh application of Briwax will restore the finish. Q: How long will the shine last? A: Under normal conditions the shine will last for six to twelve months. It will lose its shine more swiftly in high wear areas or areas subjected to moisture.
What type of wax is Briwax?
Briwax is a blend of beeswax and carnauba wax, an all natural product.
What is Briwax made of?
Briwax, Original Wax Polish is a blend of pure beeswax, carnauba wax, and cleaners.
Does Briwax change wood color?
1:293:14Selecting the Right Briwax Color by TRG Products (800)327 ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you can expect lighter color if you put something on first like an oil or or shellac orMoreAnd you can expect lighter color if you put something on first like an oil or or shellac or something like that well that's going to fill up the pores of the wood.
Does Briwax darken wood?
It brings out the grain and slightly darkens the rest of the wood. Right side is done, left is not. Clean the surface first, wipe on and rub into the grain, then buff off with a soft cloth.
Can you use Briwax on kitchen cabinets?
Apply Briwax stain to cabinets. Then using a cloth cover the section of cupboard you are staining. You don't have to use a lot of the product. A little bit goes a long way! I suggest starting in a lower cabinet that isn't the first thing people will see.
How many coats of Briwax should I use?
Apply Briwax Danish Oil liberally with a clean dry rag or brush. On new wood 2 or 3 coats will be necessary.
Can you use Briwax on stained wood?
I love using Briwax to stain and finish wood, especially pine. It leaves a beautiful touchable luster that enhances the natural character of the wood. It provides a lot of control over adding and removing color and is very forgiving of mistakes.
Is Briwax a finishing wax?
Briwax Original is a premium finishing wax that seals the surface of your woodwork while giving it a nice sheen, enhancing its natural appearance. The wax is commonly applied to antique furniture during restoration to revive the wood's original quality.
Can you use Briwax on a kitchen table?
Briwax natural beeswax is the perfect finish for any of our indoor wooden furniture products. With a clear finish it can be applied to any surface quickly and easily to clean, polish and protect your wooden furniture.
How do you remove Briwax?
Insert a white cloth into the bucket of mineral spirits until it is saturated and then wring it out. Rub the wood with the rag to remove any additional traces of Briwax. Rinse the rag in the mineral spirits often, continuing until no more residue comes off on the cloth.
How many coats of Briwax should I use?
Apply Briwax Danish Oil liberally with a clean dry rag or brush. On new wood 2 or 3 coats will be necessary.
Does Briwax seal wood?
It is ideal for sealing the pores of wood. It comes as a 4 pound cut of high quality shellac and can be diluted with denatured alcohol. Used by master finishers to body up prior to French Polishing. It provides a good base under BRIWAX waxes to produce a higher shine.
Is it better to wax or varnish wood?
Generally speaking, If the wood has been prepared correctly and the product has been applied correctly, surface coatings such as paints and varnishes tend to have a longer service life than waxes and oils, potentially lasting many years before requiring attention.
Does Briwax dry hard?
Briwax Hard Wax Oil gives a clear satin finish that is hard wearing, water and stain resistant and will dry to an attractive, durable, natural finish. It is suitable for use on internal woodwork subject to a high degree of wear.
What is briwax wax?
Briwax manufactures six different silicone-free wax products to suit a broad range of woodworking and other applications. Here’s a brief introduction to each of them: Briwax Original is a blend of beeswax and carnauba, with an emulsifying solvent, formulated as a soft paste. JaLea explained the solvent not only blends the waxes ...
What is Sheradale wax?
Sheradale Wax contains a blend of waxes, plus paraffin, which provides higher water resistance and sheen than Briwax Original. It’s a good polishing option for lacquer and other film finishes. Liming Wax creates a pickling effect when used on open-pored woods such as mahogany, ash or oak.
What is Staynwax water based?
The company’s Staynwax is a water-based sealer that comes in 16 oz. bottles in the consistency of thinned paint. It can be ragged, sprayed or brushed onto wood, then buffed to impart a smooth, velvety texture quickly and easily.
What is marble wax?
Marble Wax, a blend with a higher concentration of carnauba, is formulated to provide a water-resistant finish for marble and stone countertops and sinks as well as terra cotta or quarry tile. It buffs to a lower sheen but with more durability than softer wax offerings.
Where did Jack Bollom make his nail polish?
The two set out to manufacture women’s fingernail polish in England, but while the dyes and pigments were available, the country was fresh out of acetone. So much for fingernail polish. Instead, they bought linseed oil, set up shop in an old barn and started churning out a line of brightly colored house paints. The paint turned out to provide such a visual, emotional lift during the reconstruction of England that the Bollom Group flourished. As time passed, the company branched out into coatings for the film and textile industries, as well as fire-retardant paints.
What are citrus hand wipes?
A first in the finishing industry, according to JaLea, these citrus-based hand wipes should help to make our cleanup tasks easier. They’re intended to remove dye or pigment stains from skin, as well as latex paint, oil and other petroleum-based finishes. The wipes will be available in 35-count dispensers.
How to contact Briwax?
Although the Briwax family of products is currently sold primarily through distributors, you can learn more about them and place an order by calling the company directly at 800-527-4929. And, within the next three to six months, their website ( www.briwax.com) will be expanded to offer easy, online ordering as well.
How do I care for briwax wood?
How do I care for my piece done in Briwax? Once a Briwax finish has been applied, it should be maintained only with Briwax. Do not use household cleaners or spray polishes on a Briwax finish. For routine dusting, a clean dry cloth will be sufficient. For stubborn stains, scuffs or other problem areas, Briwax can be re-applied. As with any wood piece water is your worst enemy. I don't recommend using water. If you feel you must wipe a piece with water use a slightly dampened cloth and then use a lint free cloth to ensure the water is gone. By wiping a piece often with a dampened cloth you will find that it will loose its shine and will need a fresh coat of Briwax to bring back a shine. Sometimes I find that if a piece is starting to loose its luster you can bring back a bit of luster by using a lint free cloth to buff the surface.
What is the best wax for wood?
BRIWAX - Known as "The World's Premier Finishing Wax" is available at BLOOMFIELD TREASURES. BRIWAX is a blend of beeswax and carnauba wax, two of the finest waxes known to man. BRIWAX is designed to protect raw wood and can be applied to virtually any existing finish. Use BRIWAX on all woods and works amazingly to restore antique furniture. BRIWAX cleans, stains and polishes all in one product.
What is Briwax wax?
What is Briwax? Briwax is known as "The World's Premier Finishing Wax" is available at BLOOMFIELD TREASURES. BRIWAX is a blend of beeswax and carnauba wax, two of the finest waxes known to man . BRIWAX is designed to protect raw wood and can be applied to virtually any existing finish. Use BRIWAX on all woods and works amazingly to restore antique furniture. BRIWAX cleans, stains and polishes all in one product.
What to use to apply briwax?
What do I use to apply Briwax? A cotton cloth works well to apply Briwax. You can also use 0000 steel wool if your piece is rough or has a lot of grooves. Apply Briwax is the direction of the wood grain. Heat from friction is the secret ingredient to the rich, deep luster of a Briwax finish.
How much briwax do I use?
How much Briwax do I use? A can of Briwax will go along ways. Several large furniture pieces can be restored with just one can. Remember you don't need much! Less is Best! A little bit of wax goes a long way. Finished wood has very little exposed grain for the wax to adhere to, therefore, a very small amount of Briwax is all that is necessary {ex: a tableshpoon of wax is sufficient for and entire 4' x 6' farmhouse table}
What is a green plastic cover?
What is the green plastic cover for? The green cover is used for transporting purposes. You can discard it if you like when you open your can. Just ensure the metal cover is closed tightly. {Briwax has two covers - green for shipping and metal cover}
Do you have to clean wax before using Briwax?
Do I have to clean the piece first before using Briwax? No, but I do suggest dusting the piece first though to remove any large pieces of dirt and webs. Inherent cleaning agents in Briwax allow dirt, oil and old wax to be dissolved and lifted away, leaving a durable, lustrous hand -rubbed finish.
Customers who viewed this item also viewed
Briwax (Antique Mahogany) Furniture Wax Polish, Cleans, stains, and polishes.
Special offers and product promotions
Create your FREE Amazon Business account to save up to 10% with Business-only prices and free shipping. Register today
Have a question?
There was a problem completing your request. Please try your search again later.
Product Description
Briwax is a solvent based blend of beeswax and carnauba wax. Briwax has long been recognized by furniture restoration professionals as a premiere, multi-purpose furniture wax. It produces a lustrous patina, not a glossy surface shine.
Details
Briwax is a solvent based blend of beeswax and carnauba wax. Briwax has long been recognized by furniture restoration professionals as a premiere, multi-purpose furniture wax. It produces a lustrous patina, not a glossy surface shine.
Decorative Coat Rack from Found Objects
Just about everyone needs a coat rack in the foyer, by the mudroom, or in the workshop. Get creative and have some fun making your own! Finding and repurposing interesting old doorknobs, plumbing fixtures or tools is just part of the fun.
Make Mother a Gift to Remember with Help from Woodcraft
Give the mothers in your life a unique gift this year – one you handcraft with assistance from Woodcraft.
What is Briwax wax?
Product Description. BRIWAX is a solvent-based blend of beeswax and carnauba wax, two of of the finest wood-finishing waxes known to humankind. Most of the waxes found on the shelves today contain the solvents turpentine or mineral spirits. Briwax uses a much hotter solvent, toluene, that allows it to emulsify more durable waxes like carnauba ...
What is the best solvent for wax?
Briwax uses a much hotter solvent, toluene, that allows it to emulsify more durable waxes like carnauba to give better protection to your finished surfaces. The use of a hotter solvent results in the wax setting much more quickly, allowing a higher luster finish faster.
Can you use briwax on painted furniture?
Best Answer: Unfortunately, this is a difficult question to answer without all of the specifics. Briwax can enhance the visual appeal of patterns on painted furniture. How much depends on if you are using the original clear, or choose to use one the colored waxes.
What is briwax used for?
I love using Briwax to stain and finish wood , especially pine. It leaves a beautiful touchable luster that enhances the natural character of the wood. It provides a lot of control over adding and removing color and is very forgiving of mistakes. With Briwax it is easy to layer colors and create depth and dimension that would be difficult to achieve with other stains.
How long does it take for wax to dry on wood?
Be careful not to remove the already applied darker wax. Allow to dry until the wax sets up and gets hazey. Usually 10-15 minutes.
How to remove sawdust from wood?
After sanding wipe with tack cloth or mineral spirits soaked rag to remove sawdust. Make sure that any excess glue or other resist material has been thoroughly removed as it will not take the color and will leave light marks.
How to stain wood with briwax?
How to Stain Wood: Step 2 Apply wax. Apply the Briwax with a soft cloth making sure that your skin is protected with chemical resistant gloves . The solvents in Briwax are aggressive and will eat through regular latex gloves quickly! My favorite method of Briwax application is to have the Wood and Briwax in the sun so that the wood and wax are warm.
Can you use Briwax to stain wood?
How to stain wood using Briwax for a fast, easy, foolproof finish. We used Briwax to enhance and accentuate the natural character and beauty of the two nightstand DIY tables. We built these tables out of pine which has a tendency to take stain unevenly which makes for a blotchy, streaky, cheap looking finish. Not at all what we had in mind for these gorgeous tables. We chose to stain our wood using Briwax for an all in one stain, seal, and protect finish that is fast, easy to apply, and gives you an old world hand rubbed finish.
Can you fill knot holes with wood putty?
Larger voids and knot holes can be filled with wood putty and sanded during prep (use a dark wood filler to accentuate these areas). Or, like on these tables, I used black caulk after they were finished. I didn’t want to change the character of the knots so much as just stabilize them.
Can you paint with briwax?
With Briwax it is easy to layer colors and create depth and dimension that would be difficult to achieve with other stains. However it does have drawbacks: Cannot be painted. If you ever want to refinish and paint a piece, the Briwax would need to be stripped.
Latest News
We have added another colour to our popular range of Briwax Original Wax - Silver Grey. Now with 15 shades including clear Briwax Original is formulated with fast drying, stronger solvents...
Briwax Original - Now available in Silver Grey
We have added another colour to our popular range of Briwax Original Wax - Silver Grey. Now with 15 shades including clear Briwax Original is formulated with fast drying, stronger solvents...