Cedar Wash is designed to remove surface resin oils and high concentrations of water-soluble wood extractives in addition to dirt, grease, grime, pollen, and surface stains without harming the wood. We highly recommended Cedar Wash as a cleaner for Southern Pine, Douglas Fir, Spruce
Spruce
A spruce is a tree of the genus Picea, a genus of about 35 species of coniferous evergreen trees in the family Pinaceae, found in the northern temperate and boreal regions of the Earth. Spruces are large trees, from about 20–60 m tall when mature, and have whorled branches and co…
Full Answer
How do you use Cedar Wash?
Wash Safe Cedar Wash is a concentrate. See Coverage Area to the right to determine how many gallons of solution you'll need. Add 1/2 a cup powder per gallon of warm-to-hot water. Double the strength to remove tough stains. Mix well and consistently for 15 minutes to activate the solution. You must stir consistently to get best results prior to use.
What is Cedar Wash premium wood cleaner?
Cedar Wash Premium Wood Cleaner is what professional power washing contractors use to safely and effectively clean without the use of harsh chemicals or bleach.
Does Cedar Wash contain bleach?
Once those products soak into the cedar and the sun beats down the almost "bake" in the sun, it causes extreme drying, making the shingles or shakes dry, thin and brittle. With Cedar Wash, cedar siding and roofing shingles come out uniformly clean. Our Cedar cleaning product does not contain bleach nor does it require bleach to be added.
Does redihan Cedar Wash really work?
- Redihan's Cedar Wash ― Thoroughly cleans, brightens and restores cedar back to its original beauty without the use of harsh chemicals or bleach (which can strip the wood and make it dry and crack like a brittle nail). Make cedar like new again.
How do you use cedar wash?
Apply the Cedar Wash solution starting at the bottom of the wall and work your way up. Work only an area big enough so that the Cedar Wash is on the wall for about 10 to 15 minutes. Gently scrub the wall with a soft bristled brush to remove stubborn stains and heavily soiled areas.
What do you wash cedar with?
The Cedar Bureau recommends using a solution no stronger than one-part bleach to three parts water. Apply it with a pump sprayer and let it sit for about 15 minutes before rinsing it off with a garden hose. Be sure to keep the hose pointed downward to avoid forcing water up behind the shingles.
How do you pressure wash cedar?
Power washing can be used to clean cedar as long as the sprayer is set at a low pressure to prevent damaging the wood's soft surface. Once cleaned and allowed to dry, the wood can then be painted using a urethane-acrylic house paint.
Can you clean cedar with hydrogen peroxide?
Wash Safe in the News & Reviews: John Redihan, the company's owner, said that Wash Safe, which uses foam produced by hydrogen peroxide to lift the mold and mildew out of the wood, is nontoxic, will not harm plants or lawns and biodegrades in about six hours.
Can I use Dawn dish soap to wash my deck?
Liquid dish soap (ammonia-free) is safe for use on cleaning your deck when mixed with a little warm water.
Can I use Dawn powerwash on wood?
2:435:11Dawn Powerwash | 11 Amazing Uses Besides the Dishes to Make Your ...YouTubeStart of suggested clipEnd of suggested clipYou know how outdoor furniture seems to be dirty all the time. So you don't even ever want to use itMoreYou know how outdoor furniture seems to be dirty all the time. So you don't even ever want to use it dawn power wash can help you out there too just spray a few sprays on your outdoor furniture.
Is it OK to pressure wash cedar?
Can pressure washers be used on cedar siding? As long as the sprayer is set to a low pressure, pressure washing can be used to clean cedar. It is important to avoid damaging the wood's soft surface, so using a low pressure and not working too closely to the siding is necessary.
Why does cedar turn black?
The iron found in galvanized fasteners, as well as some window screens and flashings, can cause blue or black stains on cedar. These stains don't respond to oxygen bleach. Instead, use a wood bleach containing a 5 percent oxalic acid solution to remove the stains.
How do you keep cedar from turning GREY?
How to Prevent a Cedar Fence From GrayingClear Weeds and Plants. Clear away any weeds along the fence line, and tie back any plants growing in front of the fence. ... Mix Cleaning Solution. ... Scrub Fence with Cleaning Solution. ... Wash Debris from Fence. ... Let Fence Dry. ... Apply Cedar Fence Stain. ... Reapply Stain as Necessary.
Can you use OxiClean to clean cedar siding?
Can You Use OxiClean to Clean Cedar Siding? Absolutely! The official OxiClean website gives step-by-step instructions on removing stubborn stains from decks, patios, deck furniture, and more. Since these surfaces are made from wood, it is perfectly acceptable to clean cedar siding with the product.
Can you use bleach on cedar wood?
The best woods for bleaching include oak, beach, ash, and gum. Varieties like poplar and pine are already so light that removing further natural wood color might render them bland and lifeless. Others, like cedar, redwood, rosewood, and cherry don't take bleach well.
Can you mix dawn and OxiClean?
probably at least a cup of the Oxy Clean and Biz, ½ - ¾ cup of Cascade and ⅓ cup of Dawn. if you are using a larger container, use more soap. then, mix it all up. let all the soap crystals dissolve in the warm water.
Surface Prep Cleaner for Cedar
Cedar Wash is a Ready-to-Use cleaner specifically formulated for preparing the bare wood surface of wood species that contain high levels of wood extractives and resin oils.
Project Spotlight
Do you have an old stain that doesn't really show the warmth and beauty your home deserves? Ready to restore it to its natural look? It's easy to start by stripping old finishes using StripIt or S-100. Check Out This Video...
What pH strip should I use for wood?
We always recommend using pH strips to make sure that the surface of the wood has been sufficiently rinsed, preferably to a pH of between 6.5 and 7.5. PH Strips are available at most pool supply dealers, aquarium supply shops, and Perma-Chink Systems, Inc. They are not expensive, are very easy to use, and a great tool to ensure adequate rinsing.
How many square feet does 5 gallons of cedar wash clean?
Five gallons of Cedar Wash Ready-to-Use cleaning solution will clean approximately 1000 square feet of wood surface area. Each gallon of Cedar Wash, as applied, will clean approximately 175 to 225 square feet of wood surface depending on the wood porosity.
What is the most important step in finishing wood?
The most important step in finishing wood - whether it is a log wall, a piece of log siding, or even a piece of wood furniture - is the surface preparation prior to applying a finish system to the wood surface. This important message has been communicated by Perma-Chink Systems for many years. The reason this topic is so important is that this step, or process, has an impact on the longevity and durability of the system. More specifically, an unclean wood surface and the presence of foreign substances interfere with the direct surface contact of the coating with the wood substrate; furthermore, it will impact the adhesion properties of the finish in a negative manner as well as present a good possibility that wood discoloration will be a topic to deal with in the future.
Can you freeze cedar wash?
Store Cedar Wash out of direct sunlight and protect from freezing. Although Cedar Wash is freeze-thaw stable, if the product is accidentally frozen, allow to thaw and check for suitability of use before applying.
Can you use cedar wash in a pressure washer?
Cedar Wash is most easily applied using a pump-up garden type sprayer although a mop and bucket works, too. If you are going to use a pressure washer ( not recommended), adding Cedar Wash directly to the pressure washer does not give the cleaner enough contact time with the wood to be very effective.
Special offers and product promotions
Amazon Business : Discover discounts and FREE shipping on work supplies. Register a free business account
From the manufacturer
Use Wash Safe Cedar Wash to clean old cedar shake roofs, cedar shingle siding, cedar fencing or any other cedar used outdoors. Use on old cedar to remove the outer layer then reveal new, clean looking cedar. Use as the ultimate specialty surface prep before sealing, staining or painting cedar.
Product Description
This hydrogen peroxide based formulation continues to receive compliment after compliment for its wood brightening properties.
The reason why you should not use a pressure washer
I know pressure washers come extremely handy when cleaning dirty items but trust me, you wouldn’t want to use a pressure washer on bare wood. Not only cedar wood but any wood.
Things that you will need
Scrubbing brush: If you are cleaning a cedar deck then you will want to pick a stiff-bristle brush that comes with the stick so that you won’t have to bend down to scrub the deck. Pick hand brush otherwise.
Step by Step Process
Pour a little amount of liquid dishwashing soap into the bucket you have picked. The liquid amount should be double the amount you would have used to clean the sink that is filled with all the dishes.
Some Advanced Tips
Even after washing the wood with water if you see any dirt part on the wood, then scrub that area with soapy water again to get that cleaned.
How to kill mold and mildew on wood siding?
Always use OxiClean powder to kill off mold and mildew before pressure washing. Use a detergent that is suitable for wood siding. Make sure your pressure washer is set to the lowest setting. Be aware of fixtures that can easily be broken from power washing. Keep calm and take your time.
What is Oxiclean used for?
OxiClean uses the power of oxygen and bleach derivatives to break down the barrier shells of algae, mold, and mildew from cedar siding. Brilliantly, this product is perfect for uncovering wood's natural beauty, which makes it a prime candidate for cleaning up grimy cedar siding.
What detergent should I use on cedar siding?
Using a black tip on your pressure washer, cover your cedar siding with the sudsy detergent.
How far away should you keep a power washing wand from siding?
You should keep the power washing wand at least two feet away from the siding and keep it angled a smooch as you can to prevent buckling. Be aware. Make sure to avoid directly spraying gutters, light fixtures, and other ornamentals during the pressure washing procedure.
How long does it take for wood siding to get dirt?
However, after a few months, you notice the dirt begins to accumulate, and after a year or two, your siding starts to lackluster.
How much does pressure washing cost?
Here is what Homeguide had to say about it, "Pressure washing prices range from $173 to $311 on average with most homeowners spending around $211 to hire a professional. Power washing a house costs $173 to $358, while pressure washing a deck or driveway ranges from $108 to $262.
How long does it take for Oxyclean to soak in wood?
All the OxiClean to soak into the wood for around fifteen minutes. Once the time is up, you can use a soft-bristled scrub brush to remove the debris, followed by a rinse-off with the garden hose.
