Knowledge Builders

what is checked in va state inspection

by Mr. Jaylen Cormier Published 3 years ago Updated 2 years ago
image

Vehicle Hood and Engine: During your Virginia state inspection, we will inspect the hood to make sure that it opens and closes properly as well as the shape of your engine belts and your vehicles’ fluids. Take a moment ahead of time to check the level of fluids in your Burke, VA vehicle and make sure that everything is topped off.

Full Answer

What is included in a Virginia state inspection?

Each inspection consists of the following items, as approved by the Virginia State Police Superintendent, for further details consult the Official Annual Motor Vehicle Inspection Manual: 1. Remove Old Inspection Sticker. a rejection sticker).

What to do if you question the integrity of a safety inspection?

If you question the integrity of a safety inspection performed on your vehicle, you should contact the nearest State Police Safety Division Office . An investigation will be conducted to determine if proper inspection procedures were followed. How can I research Virginia laws?

Do you have to pass a state inspection every year?

If you drive a car, then you’re required to pass a state inspection every year. In Virginia specifically, the standards are high when it comes to vehicle safety and emissions. Although this yearly chore can seem like an inconvenience, it’s keeping our roads and families safer.

What do you look for in a light inspection?

Inspect Other Lights for: Approved type, proper bulbs, and condition of lenses, wiring and switch. Aim of fog and driving lamps. Illumination of all lamps and proper color of lenses.

image

What do they check on a Virginia state inspection?

Once you have visually examined these areas on your car, here are all the things you can expect us to inspect during your Virginia State Safety Inspection:Brakes.Parking brake.Vehicle lights.Signal devices.Steering & suspension.Tires, wheels & rims.Mirrors.Horn.More items...•

What will fail an inspection in VA?

It all revolves around safety. One factor to take into serious consideration is your tire tread depth. The tread on most new tires is anywhere from 10/32 of an inch to 11/32 of an inch. You will fail your Virginia vehicle inspection when your tread depth is below 2/32 of an inch.

What will fail a car inspection?

One or more worn, damaged, or fouled sparkplugs are present. Catalytic converter is clogged, missing, or ineffective * Malfunctioning oxygen sensor. Internal engine parts may be malfunctioning or damaged.

What do I need to get my car inspected in VA?

What items are inspected?Service brakes, emergency, parking or holding brakes, trailer brakes.Batteries.Steering and suspension.Frame, engine mounts, coupling devices and emergency chains.Tires, wheels, and rims.Headlamps, rear lamp, tail lamp, license plate lamp and rear lamp combinations.More items...

Will tire pressure light fail inspection in VA?

In some states, vehicle inspection regulations require operating tire pressure monitoring sensors (TPMS) on every vehicle that came with TPMS as Original Equipment....StateDoes TPMS have to be functional in order to pass inspection?West VirginiaYes. TPMS needs to be functioning properly in order to pass inspection.17 more rows

Can you drive a car with a rejected inspection sticker in Virginia?

1. The rejection sticker is valid for 15 days in addition to the date of inspection. 2. The rejection sticker places no travel restriction on the operation of the vehicle and is issued in lieu of an approval sticker.

Will a cracked windshield pass inspection in Virginia?

To pass the state inspection in Virginia, no chip, pit, or star-shaped crack can be more than one inch in diameter — that is, if it's located above the three-inch line at the bottom of the windshield. Cracks cannot move in relation to one another, thus weakening the structure of the whole.

When you do a vehicle check what do you not need to keep an eye on?

You don't need to keep an eye on the cleanliness of windows and mirrors in cars, as this can be achieved at every facility.

What is safety inspection?

A safety inspection is a documented or formalized procedure that is often carried out by a safety specialist to identify potential hazards. There are many types of safety inspections.

How much does a VA state inspection cost?

What is the cost of a safety inspection? The cost is $51 for the inspection of a commercial motor vehicle. The cost is $12 for a motorcycle or autocycle. The cost is $20 for any other vehicle, including trailers and motor homes.

Does VA state inspection include emissions?

Having a valid vehicle inspection sticker is required for all Virginia drivers. This includes passing an emissions inspection. Burke VA drivers should know what to expect.

How do I pass emissions in VA?

Helping Springfield, VA Motorists Pass the Emissions TestA Visible “Check Engine” Light Will Not Pass an Emissions Test. ... Get an Oil Change if it Has Been a Few Months. ... Change the Air Filter. ... Install New Spark Plugs. ... Check Your Gas Cap. ... Use Premium Fuel. ... Add Dry Gas or Another Gas Additive. ... Check Tires For Full Air Pressure.More items...

How strict is a VA home inspection?

VA appraisal guidelines can be strict and can eliminate fixer-uppers from contention. Many of the guidelines can be frustrating for military buyers who are considering older homes in need of renovation. If a home fails to meet the MPRs the buyer will have to decide how they want to proceed.

What happens if you fail emissions in Virginia?

What happens if I fail my inspection? If your vehicle fails inspection, the inspector will provide you with a Vehicle Emissions Inspection Report and an Emissions Repair Data Form detailing the required repairs. You will have 14 calendar days to repair any problems and get the vehicle retested.

How do I pass emissions in VA?

Helping Springfield, VA Motorists Pass the Emissions TestA Visible “Check Engine” Light Will Not Pass an Emissions Test. ... Get an Oil Change if it Has Been a Few Months. ... Change the Air Filter. ... Install New Spark Plugs. ... Check Your Gas Cap. ... Use Premium Fuel. ... Add Dry Gas or Another Gas Additive. ... Check Tires For Full Air Pressure.More items...

How old does a car have to be to not need inspection in VA?

25 years or olderNearly Every Vehicle Needs an Inspection Each Year Antique vehicles that are 25 years or older and registered as an antique with the DMV do not have to be safety inspected, unless you drive the vehicle regularly. New automobiles purchased in Virginia are also exempt from safety inspections for one year.

Required Official Inspection Procedure

Each inspection consists of the following items, as approved by the Virginia State Police Superintendent, for further details consult the Official Annual Motor Vehicle Inspection Manual:

Have additional questions?

NOTE: If you have a specific question with regard to motor vehicle safety inspection or inspection requirements, please refer to the Official Annual Motor Vehicle Inspection Manual, which is available through Virginia’s Legislative Information System.

What is the tread depth of a tire in Virginia?

One factor to take into serious consideration is your tire tread depth. The tread on most new tires is anywhere from 10/32 of an inch to 11/32 of an inch. You will fail your Virginia vehicle inspection when your tread depth is below 2/32 of an inch. The experts at Virginia Tire & Auto recommend replacement at 4/32 ...

Does Virginia Tire and Auto have extended hours?

At Virginia Tire & Auto, we offer extended hours to work with your schedule. It’s our priority to ensure that all equipment is functioning properly, so you get back on the road safely.

Do you have to pass a state inspection every year?

If you drive a car, then you’re required to pass a state inspection every year . In Virginia specifically, the standards are high when it comes to vehicle safety and emissions. Although this yearly chore can seem like an inconvenience, it’s keeping our roads and families safer.

Can a dashboard light cause a failed inspection?

Letting one of those signals go undiagnosed is a surefire way to fail inspection. An illuminated check engine light won’t cause you to fail inspection , but it is often a signal of issues going on under the hood that could result in a failed inspection. To be on the safe side, get any dashboard lights diagnosed before your inspection so you know what’s going on.

image

1.Virginia Vehicle Inspection Checklist | Virginia Tire & Auto

Url:https://vatire.com/car-maintenance-tips/virginia-vehicle-inspection-check-list/

2 hours ago  · Virginia Vehicle Inspection Checklist 1. Check the tread depth. You can use a penny as a measurement—if you can see Lincoln’s head, your tires are too low on tread and will most likely fail. Also, check for tire wear on the outside and inside of the tire. If you see wear on only one side, your car is probably out of alignment. 2. Check your lights

2.Vehicle Safety Inspection - Virginia State Police

Url:https://vsp.virginia.gov/safety-and-enforcement/vehicle-safety-inspection/

26 hours ago Inspect Steering & Suspension for: (Jack up front end as shown in “Official Motor Vehicle Safety Inspection Manual”.) Wear in bushings, kingpins, ball joints, wheel bearings and tie rod ends. Looseness of gear box on frame, condition of drag link and steering arm.

3.Videos of What Is Checked In VA State Inspection

Url:/videos/search?q=what+is+checked+in+va+state+inspection&qpvt=what+is+checked+in+va+state+inspection&FORM=VDRE

7 hours ago What is required for Virginia state inspection? A Virginia safety inspector must examine a vehicle’s brakes, parking brakes, headlights, other lights, signal devices, steering and suspension, tires, mirrors, horn, windshield and other glass, windshield wipers and defroster, exhaust system, license tags, under the hood, fuel system and air pollution control system.

4.Vehicle Inspection FAQs - Virginia State Police

Url:https://vsp.virginia.gov/safety-and-enforcement/safety-division/vehicle-inspection-faqs/

26 hours ago What will fail a Virginia state inspection? You will fail your Virginia vehicle inspection when your tread depth is below 2/32 of an inch. The experts at Virginia Tire & Auto recommend replacement at 4/32 of an inch — at this point, your tires will have trouble evacuating water and can negatively affect stopping distance.

5.What Will Fail a Virginia State Inspection? | Virginia Tire

Url:https://vatire.com/car-maintenance-tips/what-will-fail-a-virginia-state-inspection-what-you-need-to-know/

14 hours ago  · When we take our vehicles for inspection in the State of Virginia, several areas are checked. The following parts are checked to make sure they are in proper working order, and that they meet Virginia’s requirements. • Brakes (including parking brake) • Headlights • Other lights • Turn Signals • Steering and Suspension

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9