What is the water cycle?
The water cycle is the path that all water follows as it moves around Earth in different states. Liquid water is found in oceans, rivers, lakes—and even underground.
What are the different watering cycles on the Rain Bird ESP series?
Each program on the Rain Bird ESP series timer can run in one of four watering cycles: CUSTOM waters on the day of the week you select. ODD waters only on odd-numbered day of the month.
How do I set the watering cycle for my ESP timer?
Rain Bird ESP Timer Set Watering Cycle. 1 CUSTOM waters on the day of the week you select. 2 ODD waters only on odd-numbered day of the month. 3 EVEN waters only on even-numbered days of the month. 4 CYCLIC water on a selected daily interval. For example: every other day, every second day, or every third day.
Should I use a cyclic or drip irrigation system?
If lawn care people come on a certain day every week, it is easy to program around the lawn mowing using the custom cycle. Cyclic is a nice feature to use with drip irrigation because it often doesn’t require the frequency that lawn watering does.
How do I turn off cyclic days on Rainbird?
2:334:10ESP-TM2 Controller: Advanced Programming - YouTubeYouTubeStart of suggested clipEnd of suggested clipProgram press. And hold program select press the minus button to set the selected day as a permanentMoreProgram press. And hold program select press the minus button to set the selected day as a permanent day off or press the + button to leave the day. On.
What does day cycle on Rain Bird mean?
DAY CYCLE: The number of days before the cycle repeats, i.e., 7-day cycle: one week long: 3-day cy- cle: once every three days. WATERING DAYS: set weekdays ON or OFF as watering days (7-day cycle). Set "Today's" number within the cycle (1 through 6-day cycles).
How do I set my Rainbird to water everyday?
1:152:06Rain Bird ESP-ME3 Basic Programming - YouTubeYouTubeStart of suggested clipEnd of suggested clipProgram press the minus or plus buttons to set the selected day as either on or off and toMoreProgram press the minus or plus buttons to set the selected day as either on or off and to automatically move to the next day.
What is cycle and soak on Rain Bird?
Cycle+Soak is an exclusive feature in Rain Bird Central Control software that allows users to precisely schedule and apply water to be consistent with the infiltration rate of the soil in each specific area around the golf course.
How long should you run a sprinkler?
How Long Should I Water at a Time? A watering session should be long enough to soak the area sufficiently so all the roots receive a beneficial drink. Sprinklers should be set to run for about 30 to 35 minutes at a time twice a week. Your goal is at least 1″ of water a week for your lawn.
Why does my Rain Bird Sprinkler System run twice?
A common reason why a program is repeating is that you have a second start time set. The start times control the exact time your ESP-Me timer will begin to water and they also control how many times a day your timer will water. The ESP-Me allows you to set up to 6 start times per program.
How often should I water my lawn?
Most lawns need 1 to 1.5 inches of water per week—either from rain or watering—to soak the soil that deeply. That amount of water can either be applied during a single watering or divided into two waterings during the week. Just be sure not to overwater your lawn.
How do you set multiple watering times on a Rainbird?
0:091:15Rain Bird® ESP-Me International: Set Watering Start Times - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn the dial to the set watering start times dial position the default start time to set anMoreTurn the dial to the set watering start times dial position the default start time to set an additional start time use the arrow to choose the additional start time use the plus and minus keys. To set
How do I turn on my Rain Bird Sprinkler System after winter?
How Do I Turn Our Rainbird Back on if I Had it Winterized?Turn on the main water supply for the sprinkler system. ... Open the ball or gate valve all the way once you hear the water rushing through the pipe.Press the "Manual" start button on the Rainbird controller.More items...
Should I enable cycle and soak?
The best way to water your lawn is to use the “cycle and soak” method. This method breaks up your watering time into smaller cycles, allowing the water to soak into the soil. If an area is watered too fast for too long, many soils can't absorb it, resulting in runoff.
How long should I cycle and soak?
30 minutesAs a general rule, 30 minutes is all you need to wait between cycles. Cycle and soak not only eliminates runoff, it provides more water to the roots. The first cycle will break the surface tension of the soil and allow the water to penetrate.
How should I soak my lawn for cycling?
1:072:45Cycle and soak watering method - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe apply the water at 7 minutes you wait about an hour for that water to soak in and then againMoreWe apply the water at 7 minutes you wait about an hour for that water to soak in and then again start the next.
How do you adjust a water schedule?
0:232:31How to adjust the watering schedule on the Hunter Pro C Sprinkler ...YouTubeStart of suggested clipEnd of suggested clipWe turn our dial from the run position down to set days to water that'll. Bring you to the displayMoreWe turn our dial from the run position down to set days to water that'll. Bring you to the display that shows you the days of the week that we have it set up for watering.
How do I schedule my sprinkler system?
7:299:12How to Set a Sprinkler Schedule - YouTubeYouTubeStart of suggested clipEnd of suggested clipWatch for changing weather conditions. And adjust your watering schedule to match. When in doubtMoreWatch for changing weather conditions. And adjust your watering schedule to match. When in doubt about watering. Let the soil be your guide. If the soil is wet. Hold off on the watering.
How long should I run my Rain Bird Sprinkler System?
Keep It Balanced. Put measuring cups in various places around your lawn and run the sprinklers for 15 minutes. This will give you an idea of how much water the grass is getting and where.
How do I change my schedule on Rainbird?
0:232:04Rain Bird ESP-RZX - Setting Zone Watering Times - YouTubeYouTubeStart of suggested clipEnd of suggested clipBegin by pressing the schedule. Button. Then press the plus or minus buttons to select the zone youMoreBegin by pressing the schedule. Button. Then press the plus or minus buttons to select the zone you want a program and press the next button to continue enter.
How does soaking and cycle work?
Soak and Cycle mimics Mother Nature’s natural rainfall cycle by soaking the soil and then allowing the soil to slightly dry. This combination develops a soil condition that encourages strong roots for a more drought tolerant and disease free lawn.
How to cycle sprinklers?
But it really only requires you to do three simple steps: Step 1 – Determine the flow rate of your sprinkler heads. Step 2 – Re-program your timer clock to Soak and Cycle the zones, based on that zones flow rate. Remember, the same zone will be watered several times on the same day.
How to water lawn during summer?
Knowing how to water your lawn during the stressful summer conditions is difficult for just about everyone. Soak and Cycle takes the guesswork out of lawn watering, and ends the debate over light-and-frequent versus deep-and-infrequent watering. Soak and Cycle mimics Mother Nature’s natural rainfall cycle by soaking the soil and then allowing the soil to slightly dry. This combination develops a soil condition that encourages strong roots for a more drought tolerant and disease free lawn.
How to determine the flow rate of a sprinkler system?
To determine the flow rate of your sprinkler system, set several rain gauges or empty straight sided cans (tuna cans are ideal) in each sprinkler zone so they are within the spray pattern of the sprinkler heads. Then, run the system for a set amount of time — we recommend 30 minutes.
How much water does a lawn lose in Kansas City?
In the hot Kansas City summer, lawns lose about one-third of an inch of water each day.
Why do you do it again for each and every zone in your sprinkler system?
Congratulations! Now do it again for each and every zone in your sprinkler system, because chances are each zone has different kinds of sprinkler heads that put out different amounts of water.
What does "cycle" mean in lawn?
Cycle. Cycle means to switch to a different zone in your lawn and water it for the correct amount of time determined in your empty can test. This allows the water applied to the previous section to soak into the soil.
Why Do We Care About the Water Cycle?
We care about the water cycle because water is necessary for all living things. NASA satellites orbiting Earth right now are helping us to understand what is happening with water on our planet.
What is the process of water falling from the sky called?
This process is called condensation . When a cloud becomes full of liquid water, it falls from the sky as rain or snow—also known as precipitation. Rain and snow then fill lakes and streams, and the process starts all over again.
What is the process of water vapor turning into liquid water?
As the water vapor rises higher and higher, the cool air of the atmosphere causes the water vapor to turn back into liquid water, creating clouds. This process is called condensation .
Why do we need water?
Humans need water to drink, and to water the plants that grow our food. NASA has a satellite called SMAP —short for Soil Moisture Active Passive —that measures how much water is in the top 2 inches (5 cm) of Earth’s soil. This can help us understand the relationship between water in the soil and severe weather conditions, such as droughts.
What causes water to evaporate?
Heat from the Sun causes water to evaporate from oceans, lakes and streams. Evaporation occurs when liquid water on Earth’s surface turns into water vapor in our atmosphere. Water from plants and trees also enters the atmosphere. This is called transpiration. Warm water vapor rises up through Earth’s atmosphere.
Where can you find water on Earth?
Credit: NASA/JPL-Caltech Data source: NASA's Earth Observatory. On Earth, you can find water in all three states of matter: solid, liquid and gas. Liquid water is found in Earth’s oceans, rivers, lakes, streams—and even in the soil and underground. Solid ice is found in glaciers, snow, and at the North and South Poles.
Where is water vapor found?
Water vapor—a gas—is found in Earth’s atmosphere. Water can be found all over Earth in the ocean, on land and in the atmosphere. The water cycle is the path that all water follows as it moves around our planet. Credit: NASA/JPL-Caltech Data source: NASA's Earth Observatory.
Features
The Rain Bird® CYCLIK™ wireless control system is battery operated for economical automation of an irrigation system, without AC power and without control wires.
Specs
There are two models of field transmitters for different irrigation applications:
What Does Cyclic Loading Mean?
Cyclic loading is defined as the continuous and repeated application of a load (fluctuating stresses, strains, forces, tensions, etc.) on a material or on a structural component that causes degradation of the material and ultimately leads to fatigue. Cyclic loading causes materials to deteriorate due to fatigue, often at lower loads and after a shorter time than normally expected.
What is fatigue in biology?
Fatigue is appropriately defined as the progressive and localized damage of a material’s molecular structure, which occurs when the material is subject to cyclic loading, eventually weakening the material.
What is low volume watering?
A low volume watering method that delivers water slowly and directly to the plant roots for maximum efficiency.
Why does water gather in one spot?
Can be caused by low-head drainage, over-irrigation, or slow soil infiltration.
Why do sprinklers overlap?
The practice of placing sprinklers so that water from one sprinkler overlaps all the way to the next sprinkler head. This helps to increase overall system efficiency and prevents dry spots in the landscape.
What is a sprinkler area?
The area of landscape watered by a sprinkler or grouping of sprinklers.
What is irrigation system review?
A detailed review of an irrigation system, including tests to determine overall system efficiency, identify problems areas that need correction, and determine an ideal watering schedule.
What is a part circle sprinkler?
The area a part-circle sprinkler irrigates, expressed in degrees of a circle. For example, a 90 degree arc provides quarter-circle coverage, while an 180 degree arc provides half-circle coverage.
Is drinking water considered domestic?
Potable or drinking water. It can be used as a source of irrigation water, but once water enters an irrigation system it is no longer considered domestic or potable.
What is a cyclic timer?
Cyclic Timer is a product that can be used to periodically turn ON and OFF the motor for stipulated time intervals.
How long does a cyclic timer run?
The motor has run for 15 mins and then there is a power cut. Whenever the power resumes, the cyclic timer will continue to run for the remaining time (15 mins in this case) and then enter the OFF Cycle. What if the OFF time is set for a long time interval and there is a power cut when running in OFF cycle for a huge time.
What is the OFF time in Naren Cyclic Timer?
OFF time is the time for which the motor will remain OFF before switching ON. In other words, it is the waiting time. For example, if the OFF time is set for 60 Mins, The motor will wait for 60 mins and then enter the ON Cycle.
What is the Maximum ON time and OFF time that can be set on Naren Cyclic Timer?
In minutes mode, the maximum OFF time that can be set is from 01 minute to 999 minutes (upto 16 hours).
Can Naren Cyclic Timers be used with the starter we already have?
Yes, Naren Cyclic Timers are designed in a way that they are available for all types of existing motor starters. You need to let us know the starter you are using and we will suggest you the suitable model for you.
How long does it take for a borewell to dry?
Various domestic borewells are getting dried now a days. The situation is so worse that in some conditions are motors are able pump water for only 2 mins and getting dried. We can make use of these motors to constantly pump water by setting on time to be 1 min and OFF time to be 1 hour.
How long does it take to turn off Naren Cyclic Timers?
The whole process can be automated by setting ON time for 20 mins and OFF time for 3 hours on Naren Cyclic Timers.
