Samsung Washer DC Error Code – How To Fix It?
- Balance the Load. Most often, the DC error code can be resolved by redistributing the weight of existing items in the washing machine.
- Level the Washing Machine. If weight redistribution doesn’t correct the DC error code, it might be the case that the washing machine itself is not level.
- Check the Suspension Rods. ...
- Contact a Professional. ...
How to troubleshoot a Samsung washing machine?
Samsung Washing Machine Shakes During Spin Cycle
- Turn off your water and power supply to avoid electrocution and water spills.
- Tilt the machine back a bit and wedge something like a block of wood (or anything similar) under the washer.
- Get the wrench that came with your washing machine.
- Look for the loose leg and tighten it with the wrench.
How to fix de error on Samsung washing machine?
- The machine will be displaying the error DE.
- Check the door is shutting correctly.
- Strip down the machine to get access to the door interlock.
- Check wiring harness for signs of burnt connections or broken wires.
- Replace door lock is faulty.
- Reassemble the washing machine test the machine and make sure it starts. If all is ok problem is fixed
Why is my Samsung washing machine not starting?
Washing Machine Will Not Start – What To Check – How To Fix
- Power breaker off, washer not plugged in.
- Lid switch faulty, door switch faulty.
- Start switch and or timer faulty.
- Washer motor faulty.
- Main control board faulty or shorted. Be sure the washer is plugged into the electrical outlet in the wall. ...
How to clean your Samsung washing machine?
Unplug the machine before removing these parts:
- Consult your owner's manual to see how to remove the washing machine filter.
- For agitator models, you can use a socket wrench to remove the bolt holding the agitator. ...
- Place the agitator and filter into a bucket of hot, soapy water. ...
- Use a soft bristle scrub brush to scrub down the removed parts.
- Rinse thoroughly, then dry them with a microfiber cloth.
How do I fix DC error on my Samsung washing machine?
A DC code error on a Samsung washing machine indicates that the washer is unable to spin due to a load imbalance. Correcting a DC error is as simple as redistributing the weight of an existing load, removing items to reduce the overall weight in the washer, or changing suspension rods (or shock absorbers).
Why does my Samsung washer show DC?
The UE or DC error code indicates unbalanced load.
How do you rebalance a Samsung washer?
1 Turn the washing machine off and then on again.2 Hold down the Temp and Delay End + buttons for 3 seconds until a CB code appears on-screen. ... 3 Press Start/Pause to run the Calibration cycle.4 The drum will rotate clockwise and anticlockwise for up to 3 minutes.More items...
How do I get my Samsung washer to spin?
How to spin only Samsung washer?...To run a Spin Only cycle on a model that does not have this option on the cycle selector dial, perform the following:Power the unit on.Press and hold the spin key for approximately 3 seconds. A chime will sound.Select the spin level, if desired.Press the Start/Pause button.
What does DC3 mean on Samsung washer?
DC3. The Add Door lock/unlock is not working properly. • Turn the machine off, and restart the cycle.
How do I fix my Samsung DC3 washing machine?
DC3 - The Add Door lock/unlock is not working properly. When you get a DC3 error, you should simply turn off the washing machine, and restart the cycle. If the error persists, you should reach out to 1800 40 7267864 for further assistance.
Why is my Samsung washing machine still showing a DC error code?
If your washing machine is still displaying a DC error code, the next possible cause is faulty suspension rods. Samsung washing machines have suspension rods that help to absorb shocks/movements when the washer is operating. Over time they can get worn out or damaged and will need to be replaced.
Why does my washer have a DC code?
Make sure that none of the items in the washer are tangled around the washer drum, as this can cause the DC code to appear because the drum cannot turn around correctly. If you’re just washing a normal load of clothes, make sure that the washer isn’t overloaded (i.e., your clothes shouldn’t be loaded right to the very top and densely packed in).
What to do if your washing machine is not sitting on the floor?
If you find that the washing machine is not sitting perfectly level on the floor, then you can try to move the washing machine to a new position, or you can adjust the leveling pegs underneath your washing machine.
Why is my washer not balancing?
If you’re only washing a couple of items, then sometimes they can get bunched up and sit in one location in the washer, which makes it not balance properly. The solution to this problem is to add more items, such as a heavy towel, that you can evenly distribute around the washer drum.
What happens if my washing machine is not level?
When the washing machine isn’t sitting level on the floor, the washer will not be balanced, and the DC code will appear. Here’s how to check if your washing machine is level: Use a leveling tool to check if your washer is sitting on a flat and level surface.
Why is my Samsung washer not spinning?
The DC code means that your washing machine is unable to spin correctly due to an imbalance in the load. Here are the main reasons why the DC code appears and how you can fix it.
Why is my washing machine not balanced?
When the wa shing machine isn’t sitting level on the floor, the washer will not be balanced, and the DC code will appear.
Why is my Samsung washing machine still showing DC code?
If you have tried all of this and you are still seeing a DC code error, the issue could be the suspension rods. Every Samsung washing machine has a set of drum suspension rods. Over time, with numerous washing machine loads, these suspension rods are going to experience a bit of wear and tear. If you have a faulty, damaged, or worn-out suspension rod, they need to be replaced. If you have to replace one of them, you probably have to replace all of them. Fortunately, a set of them is not expensive.
How to fix a washing machine error code?
If you have played around with a load in your washing machine and are still getting an error code, you should make sure the washing machine is on level ground. Take a look underneath the washing machine and see if there is anything that is throwing it off. If there is, you want to take a few minutes to level the washing machine itself. Then, start it up again and see if it will wash your load. If the ground is not level, your washing machine is not going to be level either.
What Does a DC Error Code Mean?
If you are seeing a DC error code on your Samsung washing machine, this is a sign that the washer is not able to spend properly. Your washing machine is not able to spin because the load is not balanced. If you would like to correct this DC code error, you simply have to redistribute the weight of the existing loan. For example, you might be able to remove current items, reduce the weight in the washer, or even rotate the suspension rods, which are responsible for absorbing the shock.
Why is my washer spinning?
If you have redistributed your items appropriately and are still seeing a DC code error, you may want to try removing a few items. If your items are distributed properly, the problem could be that the washing machine load is simply too heavy. If the motor is not able to spend, remove a few items. That way, your washer will have an easier time spinning.
Why is my Samsung washing machine not balanced?
Your washing machine is not balanced properly because some clothing items do not weigh as much as others. For example, bulky items such as towels, comforters, and bedsheets are going to weigh a lot more than underwear. You may need to move around bulky items including jackets, jeans, and sweaters to more evenly distribute the weight of your load.
How to balance a comforter in a washing machine?
If it is, you simply need to open it up and spread it out across the width of the washing machine. That way, it will be balanced appropriately.
Can you replace a Samsung suspension rod yourself?
If you would like to replace your Samsung suspension rods yourself, you may be able to do so by following the instructions of this video. At the same time, you might want to make sure you do the job correctly by hiring a professional. That way, you know this issue has been addressed properly the first time.
Possible dC error problems
When the dC code flashes on the Samsung washer display, some technical difficulties can arise:
How to identify a malfunction
If the Samsung device issues the dC error during washing, perform a simple diagnosis before calling a specialist.
Checking the electronics module
In Samsung washing machines, error “dC” on the display can report the electronic unit problems. Try to force the device to reboot, turning it off for a few minutes from the outlet. If this method also doesn’t help to remove the error, the problem is in the mechanism for locking the door.
Why does my Samsung washer have a DC error?
Be sure to keep large or bulky items away from the spin barrel in your Samsung washer — it’s actually very easy to get tangled around the spinning machinery, and this could cause a DC error code.
Why does my washer have DC errors?
DC errors are essentially caused by a load imbalance or excess weight in the washer. This usually happens when there’s an imbalance in the load inside and one of the washer’s shock absorbers needs repair. To continue using your washing machine, you should redistribute weight to the opposite side to balance out the load.
What Does DC Mean On A Samsung Washer?
When you get the dreaded DC code error message on your Samsung washing machine, you immediately want to know how to fix it. The error is displayed during a load of laundry: the drum won’t spin, and sometimes it makes a beeping noise. Luckily, The solution is simple.
How much can a Samsung washer wash?
Samsung washers are known for their large capacities — you can wash up to 8 kg/17.6 lbs of laundry at a time. Yet, even though the washer has plenty of space to fit your favorite set of clothes, you might run into the issue of overloading your washing machine.
Why is my washer not balancing?
Your washer may be having trouble when it comes to balancing your loads. The most common causes of unbalanced loads are bulky items, such as bedsheets, comforters, and towels. Jeans, sweaters, and jackets also cause imbalance due to the weight and the irregular shape of the pockets. Oversized loads will not give good washing results.
What does a Samsung washer error code mean?
Samsung Washer DC Error Code indicates an unbalanced load and Samsung Washer will not spin the clothes around as it should. This can be fixed by removing some of the clothes from the Samsung washer or redistributing them evenly throughout the Samsung washer.
Why does my Samsung washer keep sticking together?
When washing a single item or a small number of items, the centrifugal force of the spinning motion can cause them to stick together. This is known as “balling up.” If this happens, a Samsung Washer DC error code will appear on your washer’s display panel.
What does a DC code on a Samsung washer mean?
A DC code error on a Samsung washing machine indicates that the washer is unable to spin due to a load imbalance. Correcting a DC error is as simple as redistributing the weight of an existing load, removing items to reduce the overall weight in the washer, or changing suspension rods (or shock absorbers).
What to do if your washing machine is not level?
If you’re still not sure whether or not your washing machine is level, try manually rocking the washer slightly — if it rocks, then a spin cycle will likely result in a DC code error.
How to move a washing machine to a level surface?
If you are unable to move your washing machine to a level surface, try adjusting the leveling pegs of the washer itself. Locate the peg in the corner of the washing machine where your surface is lowest (assuming it’s uneven), and spin the leg counterclockwise to raise it.
Why is my load unbalanced?
Common causes of unbalanced loads are: bulky items such as bedsheets, comforters, and towels. If you get a DC code error, check for one of these common causes. If you have a load of bulky items, try balancing the item around the spin barrel if it is unevenly balled up in one spot.
What does it mean when weight redistribution doesn't correct the DC error code?
If weight redistribution doesn’t correct the DC error code, it might be the case that the washing machine itself is not level.
Do Samsung washers have drums?
Samsung washers come with drum suspension rods that might experience wear and tear over time.
Can a Samsung washer spin barrel rotate?
Although Samsung washers have high volume capacities, it’s still possible to overload the machine leading to a DC error when the spin barrel can’t rotate.
Signs of The DC Error Code in Samsung Washing Machines
Possible DC Error Problems
- When the dC code flashes on the Samsung washer display, some technical difficulties can arise: 1. a user can’t close the hatch; 2. if the unit issues the DC error at the end of washing, the door can’t be unlocked; 3. the washing machine closes but the lock doesn’t work. Depending on the washing machine’s behavior, the problem can be both insignificant and difficult. The last one req…
How to Identify A Malfunction
- If the Samsung device issues the dC error during washing, perform a simple diagnosis before calling a specialist. For the initial equipment test: 1. make sure that the washing machine is tightly closed; 2. check the place between the hatch and the door for any obstruction. The point is that a foreign object may get stuck there and block the washing machine. In both cases, the answer is …
Checking The Electronics Module
- In Samsung washing machines, error “dC” on the display can report the electronic unit problems. Try to force the device to reboot, turning it off for a few minutes from the outlet. If this method also doesn’t help to remove the error, the problem is in the mechanism for locking the door. The table will help you to understand the meaning of the “Doo...