Deep Well Sockets Extended deep well sockets allow the user to access hard to reach bolts or nuts when regular sockets are to short. These tools come in 6" lengths and have 1/2" drives that can be used on most standard impact guns.
What are deep well sockets used for?
Deep sockets: A deep socket can help you reach bolts that are far down in a vehicle or piece of machinery that you're working on. These are often needed when the bolt protrudes from the nut, like a tire lug nut, or the fastener is recessed.
What's the difference between deep well and shallow well sockets?
Shallow, low-profile sockets (left image) fit spaces where there's little clearance above the head of the fastener. Deep sockets (right image) can reach the nut on a longer, threaded bolt; they also allow you to reach recessed fasteners.
How tall are deep well sockets?
Approximately 7″ overall length for use on clamps and couplings.
What size is a deep socket?
In such cases, mechanics use deep sockets. Usually, measuring one inch in length, you can use deep sockets in inaccessible places.
Do I need deep well sockets?
A normal, shallow socket may not even touch the nut before the top of the stud or bolt hits the end of the socket. In this case, a deep socket is necessary to accommodate the long end of the bolt and fit snugly around the nut. Having some deep sockets on hand can be helpful for situations like this.
How do you tell if a well is deep or shallow?
Shallow wells are generally for water less than 25 feet from the surface, and deep wells can go down hundreds of feet. Wells use pumps to draw water up to the surface. Because shallow wells don't have a lot of room, their pumps are above the ground, usually inside a well housing.
What is a standard socket size?
There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters). In-between sizes are available too, starting with 1/4 inch (0.6 centimeters) and increasing every sixteenth of an inch (0.16 centimeters).
What is the OD on a 3/8 socket?
Impact 3/8" Drive Deep Well Sockets Features:Item #DiameterBase Outside Diameter187873611/32"33/64" / 13mm18774733/8"37/64" / 14.5mm18774747/16"43/64" / 17mm18774751/2"3/4" / 19mm21 more rows
What is the outside diameter of a 9/16 socket?
Q:What's the outside diameter of this socket? A: Its outside diameter is 1.77 in.
What are the 3 types of sockets?
Three types of sockets are supported:Stream sockets allow processes to communicate using TCP. A stream socket provides bidirectional, reliable, sequenced, and unduplicated flow of data with no record boundaries. ... Datagram sockets allow processes to use UDP to communicate. ... Raw sockets provide access to ICMP.
How many types of sockets are there?
There are two types of Sockets: the datagram socket and the stream socket. Datagram Socket : This is a type of network which has connection less point for sending and receiving packets.
How do I know what size socket I have?
It's important to note that socket sizes are actually given in two measurements, namely: The size of the drive socket (the part that attaches to the socket wrench). These are always given in imperial measurements, and will usually be either 1/4", 3/8", 1/2", 3/4" or 1".
Can I use a deep well pump on a shallow well?
If you do not have a well casing, you have a shallow well. Some well casings are 2” and require special accessories with a convertible jet well pump. If your well casing is 4” or more in diameter, you can use either a jet well pump or a deep well submersible pump, depending on the depth of your well.
Are deeper wells better?
Opting for a deep well means you'll get a great supply of water, and potential contaminants will not only take longer to reach the water supply, but may also be significantly diluted by the time they get there, which is all good news.
How many feet is considered a shallow well?
Very shallow wells (less than 20 feet) can use a suction pump at the ground surface. Deeper wells must use a submersible pump to push the water to the surface.
What qualifies as a deep well?
Definition of deep well : a well in which the water level is at a depth exceeding 22 feet beyond which the ordinary suction pump does not operate satisfactorily.