Is DensGlass a gypsum?
DensGlass® Sheathing is a high performance fiberglass mat gypsum sheathing board, with over 30 years of use. It's available worldwide and is the #1 architectecturally specified product of its kind in the US1.
Is DensGlass a drywall?
DensGlass 5/8-in 4-ft x 8-ft Mold Resistant Moisture Resistant Regular Drywall Panel.
Is DensGlass as strong as plywood?
Densglass sheathing has been designed and produced to withstand even the most extreme weather conditions, including heavy rainfall, snowfall, and humidity. Since it is suitable for these areas, it is considered more durable than plywood, and it doesn't budge as easily.
Is DensGlass waterproof?
It is a ready-mixed, flexible, waterproof coating which can be used on gypsum, cement or wood based sheathing substrates. Sto VaporSeal over DensGlass panels can be used on vertical above grade walls.
Can you screw into DensGlass?
Nails or screws, as listed in the fastener chart, may be used to attach DensGlass Sheathing to framing. When a pneumatic fastening system into metal is used to attach DensGlass Sheathing, consult with manufacturer for application specifications and shear resistance data.
Do you tape DensGlass?
If denseglass is your exterior sheathing, the best air barrier is taping the seams on it.
How do you cut DensGlass?
The nice thing about this product is you can cut it with a utility knife just like using regular drywall. Georgia Pacific publishes a pretty good resources for showcasing and using DensGlass Sheathing.
Can you use DensGlass outside?
DensGlass Sheathing was created to withstand normal weather and moisture exposure for up to 12 months. DensGlass Sheathing can be used in Exterior Insulation and Finish Systems (EIFS).
Can DensGlass be used inside?
DensGlass Sheathing is not intended for interior or exterior tile applications. For interior tile applications, consult our DensShield® Tile Backer brochure. DensGlass Sheathing should not be used in lieu of plywood where required. Do not apply DensGlass Sheathing below grade.
How heavy is a sheet of DensGlass?
SpecificationsDrywall FeaturesFire Resistant, Moisture Resistant, Mold ResistantDrywall Product Thickness (in.)5/8 in.Product Width (ft.)4 ft.Product Length (ft.)8 ft.Product Weight (lb.)80 lb.
Can you plaster over DensGlass?
You can install stucco over DensGlass for a long lasting finish. DensGlass exterior sheathing is a paperless board that prevents moisture wicking and the interior of your home from becoming exposed to the elements.
Is DensGlass safe?
This product is not hazardous in the form in which it is shipped by the manufacturer but may become hazardous by downstream activities such as cutting, sanding, or otherwise working with this product that generate large amount of dusts.
Is DensGlass a structural sheathing?
DensGlass SilverTM residential structural wall sheathing incorporates the proven glass mat Dens TechnologyTM with a moisture-resistant core to produce a residential exterior sheathing that: Meets requirements of ASTM C 1177 and applicable sections of ASTM C 79.
Can DensGlass be used on interior walls?
With their designed-in strength and moisture resistance, Dens® panels, when used on interior walls, deliver dimensional stability, moisture resistance and the highest level of performance for mould resistance under ASTM D3273 test method.
What is the purpose of DensGlass?
DensGlass® Sheathing It is a preferred substrate under brick, stone, stucco, siding and EIFS due to its ability to protect a structure against incidental moisture during and after construction. DensGlass Sheathing adds performance and durability to a wide range of fire-rated and non-fire-rated building assemblies.
What is exterior drywall?
Exterior Gypsum Sheathing is a special-purpose drywall panel consisting of a moisture-resistant, noncombustible core covered by glass-mat facers on both front and back surfaces and long edges.
What is Plywood Sheathing?
Before you make a final call, it is necessary to get familiar with all the options and choose the best solution for your particular home. When you think about it, sheathing isn’t something that can easily be replaced, and it is a permanent decision.
What is the difference between Densglass Sheathing and Plywood Sheathing?
In addition to your budget, as well as the weather conditions in your area, you have to consider various factors before deciding what kind of sheathing to use. We’ve prepared a list of important factors to consider that will help you make the final decision.
Densglass Sheathing or Plywood: which one is better?
The first factor you have to consider is cost. As we’ve mentioned, plywood is a more expensive option, but it doesn’t require professional help. Densglass sheathing installation, on the other hand, should be handled by professionals.
What is Densglass Sheathing?
Densglass sheathing is a type of insulation made from recycled glass. It comes in the form of panels that are one inch thick and can be used as exterior siding, interior wall covering, or roofing material for low-slope roofs.
What is Plywood?
Plywood comes in different grades depending on the type of wood used and what kind of glue is applied. With so many different grades available, it can be difficult to know which one you should use for your project. The common types are:
Weight and Density
Unlike other types of roofing materials like metal or asphalt shingle, plywood is very light and easy to install. It weighs approximately 15 pounds per square foot (32kg/m²). On the other hand, Densglass sheathing weighs about 60 pounds per square foot (120kg/m²).
Appearance
Denglass sheathing is a dark grey/green color that comes in slabs of varying sizes depending on your project needs. Plywood, however, can be purchased in different grades and colors so you have the option to choose from a variety of wood types (e.g., pine, birch, hemlock).
Densglass sheathing vs Plywood: Applications
Because of the low cost, availability, and ease of installation, plywood is ideal for temporary fixes. This includes emergency repairs or construction that will take less than six months to complete.
Conclusion On Densglass Sheathing vs Plywood
Plywood and Denslass sheathing are both viable options for home insulation. While plywood is ideal for temporary fixes, Densglass sheathing is the more permanent solution that will give you peace of mind knowing that your roof can withstand any weather condition over the long term.
