Causes of the E1 Error & Solution
- Clogged Inlet Valve. The inlet valve is a key part of the washing machine that helps to control the flow of water into the machine.
- Failed Inlet Valve. If your inlet valve has failed, it will need to be replaced. ...
- Pressure Switch Hose is Damaged or Clogged. ...
- Water Level Sensor. ...
What is the E1 error code for the Whirlpool?
F1-E1 error code on the Whirlpool oven means that the control unit has some functionality error. In addition, it can also mean an issue with the associated wiring of the control unit. So, these issues are generally common with the oven, but there are various solutions that shall work.
What does E1 mean on a whirlpool washer?
People also ask, what is the meaning of e1 in Whirlpool washing machine? 1. Water Supply Valves – Not Fully OPEN. Hot and cold water supplies must be turned ON. F8 E1 error code on washing machine indicates water valves may not be turned on. Washing machine water sensor cannot detect that both water supply valves are open.
How to fix Whirlpool duet washer error code E01 F09?
Reasons Why Your Washer Displays the Error Code e01 f09
- Your washer’s drain hose may be bent and is not letting water out of your machine. ...
- Be sure that your washer’s drain hose height does not exceed 96 inches or risk having a washer that does not drain water properly.
- Clean your washer’s drain pump filter at the bottom front of your machine by removing objects and particles.
How to troubleshoot a whirlpool Cabrio washer?
Whirlpool Cabrio Washer Not Spinning
- Check Drive Pulley Nut. The nut that keeps the drive pulley together can become loose over time. ...
- Faulty Shift Actuator. Washers are one of the most convenient ways to get your clothes clean at home, but they can also be one of the most frustrating.
- Check Lid Switch. ...
- Drive Belt Issues. ...
- Defective Door Latch. ...
What does E1 mean on washing machine?
When the Washing Machine is displaying E1 in the panel, it is indicating an error in the water supply. The appliance is not detecting that the unit is filling with water. To resolve, checking the following: • Check whether the water supply is turned on and that there is adequate water pressure.
What does E1 mean on a Whirlpool washer?
A Whirlpool washer E1 or F9 error code (FP with some models) means that the washer is taking too long to drain (typically, over 8 minutes).
How do I fix E01 error on my Whirlpool washer?
How to Fix Whirlpool Washer F3/E1 Error CodesWhat Does the F03/E01 Error Code Mean?Step 1 – Reset Your Washer.Step 2 – Check the Switch Hose.Step 3 – Check the Water Level Sensor.Step 4 – Check the Air Trap Pipe.Step 5 – Check the Wiring.Step 6 – Replace the Control Board.
How do I clear the error code on my Whirlpool washer?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.
What does E1 mean?
AcronymDefinitionE1EveryoneE1Enterprise One (JD Edwards software)E1Echelon 1 (US DoD)E1European Basic Multiplex Rate (30 voice channels; 2.048 Mbps)3 more rows
What does E1 and F3 error Whirlpool washer?
The F3 E1 alert indicates the washer can't detect the water level. There may be an issue with the appliance control unit or associated wiring.
How do I fix e1 error on washing machine?
Possible SolutionsCheck that the water faucets are not closed.Check that the water pressure in the house is over 20 kPa.Clean the inlet hose filter screens. Be careful not to remove or disturb the screen placement.Check that the drain hose is not below 27½" (700 mm) from the floor.
What does E01 and f01 mean on a Whirlpool washer?
The error means your CCU (central control unit) has failed and will need to be replaced. The CCU is the main control board for your washer and it's located under the top panel of the washer in the front right corner.
What does E01 and F09 mean on a Whirlpool washer?
Whirlpool Duet Washer Error Code E01 F09 means LONG DRAIN TIME. When your Whirlpool washer goes into drain mode and the drain time is past 8 minutes and not reaching the reset level in the pressure sensor then the valves in the drain are turned off and the drain pump will cease to pump out the water.
What does e1 and f6 mean on a Whirlpool washing machine?
0:075:51WHIRLPOOL WASHER — F6 E1 ERROR (SOLVED) - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd this means that there's a communication problem between the main computer and the motor controlMoreAnd this means that there's a communication problem between the main computer and the motor control unit and normally. This is caused by a faulty motor control unit that's been kind of overloaded.
What are the most common problems on a Whirlpool washing machine?
Here are seven of the most common problems on a Whirlpool washing machine and potential fixes for them.Washer Making Unusual Noises. ... Washer Won't Start. ... Washer Lid Won't Lock. ... LD Error Code Appears. ... Washer Leaves Deposits on Dark Clothes. ... Washer Has a Burned Plastic Odor. ... Rust Spots Appear on Washer Lid.
How do I reset my Whirlpool front load washer?
Rotate your dial until you have the following three lights illuminated: RINSE, WASH, and STOP. Then turn off your washer and unplug it for ten seconds. When you turn it back on it should be reset. You can run a test load without any clothing to ensure that the reset worked.
How do I fix E1 F9 error on Whirlpool washer?
If F9 E1 (drain pump system problem - long drain) appears in display, the washer is taking too long to drain water. The drain may extend more than 4.5" (114 mm) into standpipe. Check plumbing for correct drain hose installation. Use drain hose form and attach securely to drainpipe or tub.
What does E1 and F9 mean on a Whirlpool washer?
May 4, 2022. A Whirlpool washer error code E1/F9 occurs when the washer's control board detects that the washer cannot drain. Therefore, to resolve the E1/F9 error code, the washer components responsible for draining will need to be checked and possibly replaced.
What does E1 and f6 mean on a Whirlpool washing machine?
0:075:51WHIRLPOOL WASHER — F6 E1 ERROR (SOLVED) - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd this means that there's a communication problem between the main computer and the motor controlMoreAnd this means that there's a communication problem between the main computer and the motor control unit and normally. This is caused by a faulty motor control unit that's been kind of overloaded.
How do I reset my Whirlpool front load washer?
Rotate your dial until you have the following three lights illuminated: RINSE, WASH, and STOP. Then turn off your washer and unplug it for ten seconds. When you turn it back on it should be reset. You can run a test load without any clothing to ensure that the reset worked.
What does F3 E1 mean on Whirlpool?
The four digit code on the display of your Whirlpool appliance is pretty easy to decipher. The first two signs stand for the sensor failure, while the second half of the code specifies the area where it is located. In case with F3 E1 Error code your machine I pointing your attention to the pressostat, which is responsible for the control of the water level.
How to fix the F3 E1 Error?
First of all, you have to eliminate the one-time control panel malfunction from the list of possible reasons. Switch off the device and unplug it from the socket for a few minutes. Restart it and see whether the error code is still indicated on the display. If no — lucky you, it was just a system glitch and now you can start your washing process.
Why does my water level sensor keep leaking?
In most cases, it can be caused by the issues with the water-level sensor, such as damage to the detector or problems with the wire connections. The same error can be caused by the damaged or clogged hosepipe and air trap, or by a breakage of the control unit (whether a one-time or a more serious).
Meaning of the E1 F1 Error Code
An E1 F1 error code on a Whirlpool Duet washer indicates that there’s a problem with the appliance control unit (ACU). This problem can be due to an issue in its wiring or connectors or an actual damage to the components of the ACU.
Causes for The E1 F1 Error Code in a Whirlpool Front-Load Washer
If the voltage at the washer’s power source isn’t within the levels that are needed by the washer, this error will occur as the ACU can’t function with the inappropriate voltage. Both a voltage surge or drop can cause this issue, so always make sure the voltage at the electrical outlet is in the 110-120 VAC range.
How to Fix This Error Code
First off, you have to check that your washer is getting enough voltage. So, start by checking for a damaged power cord or a loose power outlet in the wall. Also, see if your washer is on a dedicated circuit.
Conclusion
The F1 E1 error code on a Whirlpool Duet washer indicates an appliance control unit fault. This is mostly due to a problem with the washer’s voltage or the actual ACU. Still, you can fix this error on your own without the help of service providers if you follow the user manual correctly.
Why does my washer have an E1 F9 error?
This usually happens when a washer is pushed against the wall, bending the hose as a result.
What Does the E1 F9 Error Code Mean?
In simple terms, the E1 F9 code means that your Whirlpool Duet front-load washer can’t spin or drain properly. It usually appears once the main control has detected that the pump has failed to eliminate the water inside the drum after 8 minutes or so.
What happens if the washer hose isn't installed properly?
For example, if the drain hose height isn’t between 36 to 96 inches, the pump won’t be able to push the water out of the washer, or the washing machine will simultaneously fill back up with water.
What to do if your washing machine doesn't drain?
Before you access it, empty the washing machine into a bucket or bowl and put a towel under the filter to catch any remaining water. Then, remove the filter and rinse it under running water to remove all debris.
What is the E1 F9 code on a pump?
When the pump or its filter is clogged, the E1 F9 code will also appear on the screen.
Why won't my water pump drain?
This is usually attributed to a defective main control board. If the control board is faulty, it won’t tell the pump to start draining when the time comes. This can also happen if the connections between them are damaged or have come out of their place.
What to do if the pressure sensor is not working?
If the problem isn’t gone, then check the pressure sensor and the pressure tube. Test the sensor’s resistance values and empty the pressure tube if you find anything blocking it, then see if the error clears.
What is the function of a Whirlpool washer?
All users of Whirlpool washers are informed about a very useful function – the electronic self-diagnosis system. That means that in the case of failure machine determines a breakage and displays information in a form of the code. With the help of this option, you can cope with a problem by yourself without calling a repair service.
How many cycles does a washer have?
The washer has run 30 wash cycles and is indicating a reminder to run the Clean Washer with affresh cycle. Run the Clean Washer with affresh cycle. If the Clean Washer with afresh cycle is not turned on, the LED will stop flashing at the end of a wash cycle after running 3 more regular wash cycles.
