What is Quick Step 5 in 1?
Quick-Step’s revolutionary 5-in-1 moldings set comes with a slicer that can specifically cut the molding to your needs. It is able to mimic a t-molding, square nose, hard surface reduce, carpet reducer and stair nose.
What is a reducer in a floor?
Similar to an end cap, the reducer is molding that is sloped on one side to transition between floors of different heights. This molding slopes at the end creating a seamless transition from floor to floor.
What is end cap molding?
An end cap molding has several uses, such as transitioning from laminate to carpet, fireplaces and exterior doors. With one raised side, it caps off the flooring allowing protection from debris and damage.
What is a T molding?
T-Moldings are used for even height surfaces. For rooms larger than 30 ft. long laminate installation, you will need to have a transition molding from any floating floor to stabilize the planks. T-moldings are also commonly used in doorways and hallway transitions.
What is quarter round molding?
Quarter round moldings are a versatile perimeter molding style that adds a finishing touch, while covering the expansion gap. Use this floor molding as an addition to a wall base, around cabinets and at the base of steps. Quarter round moldings can be color matched to your flooring for a uniform look.
What is wall base molding?
Wall base moldings are a nice decorative touch to add around the edges of your room. Covering the expansion gap, this molding style provides a sophisticated finish in a variety of colors to match your floor. Using glue or finishing nails, you can easily fasten this molding to the wall.
Does molding come with a warranty?
Some of our moldings come with warranties, so you can have peace of mind after your installation! You can view the detailed warranties by the links below.
What are the different types of molding?
There are dozens of different styles of molding including: 1 Astragal, which is a semi-circular type of molding. It is attached to a single or pair of doors to help cover the gap where they meet. It is a common type and style of molding found in a lot of modern homes. 2 Convex molding, is a type of moulding that is carved in imitation of a twisted rope or cord. It was most commonly used for decorative moldings in Romanesque style in England, France and Spain. Convex moulding was found to be commonly adapted for 18th-century silver and furniture design thanks to renowned furniture designer Thomas Sheraton, according to the Lewis, Philippa & Gillian Darley (1986) Dictionary of Ornament. 3 Casing, is the finished trim found around the sides of a door or window opening covering. It helps to bridge the gap between the finished wall and the frame to which it is attached. This is another common molding design element found in many modern homes. 4 Keel molding, is another example of early English styles of decorative moulding. It is a sharp-edged moulding design resembling a cross-section of a ship’s keel. 5 Crown molding, is wide, sprung molding. This style of molding, considered to be an upgraded style of design and function, is used at the junction of an interior wall and ceiling. It is the general term for any molding at the top or “crowning” an architectural element.
What is the old world spelling for molding?
Moulding is the “Old World” version of the spelling and molding finds itself exclusive to usage in the United States among woodworkers and carpentry businesses. Some US-based businesses or woodworking professionals might opt to go with the moulding spelling just for variety or differentiation.
Why use a moulding?
The benefit to using a moulding is that the concaves apply light and darkened-shaded stripes to a natural object without paint or pigment. Lastly, mouldings are also beneficial for use as a weather-sealing joint, which adds to its form and function in a house or building.
Why is molding important?
This is why moulding often helps to increase home values and desirability in homes in the modern day. The practice of Moulding or Molding began as an art form with woodwork and was traditionally made with solid milled wood. However, new technologies have allowed molding to be made with PVC plastics and sometimes stone.
What is the difference between convex and astragal molding?
There are dozens of different styles of molding including: Astragal, which is a semi-circular type of molding. It is attached to a single or pair of doors to help cover the gap where they meet. It is a common type and style of molding found in a lot of modern homes. Convex molding, is a type of moulding that is carved in imitation ...
What is a keel molding?
Keel molding, is another example of early English styles of decorative moulding. It is a sharp-edged moulding design resembling a cross-section of a ship’s keel. Crown molding, is wide, sprung molding. This style of molding, considered to be an upgraded style of design and function, is used at the junction of an interior wall and ceiling.
What is the phone number for custom molding?
We can offer any custom molding profile for both residential and commercial jobs in any quantity. Please call for more information! (888) 390-7245. Mouldings in a building or home provide a variety of functions ranging from simple to functional and decorative.
What is Scribe molding?
Scribe molding is a thin piece of trim that covers any gaps between your cabinets and the wall. This is an easy way to solve any visible inconsistencies once your installation is complete. It's common for the walls and ceilings to be inconsistent if you're remodeling a kitchen in a historic home, so keep in mind that you might need ...
Why do you need risers on crown molding?
Riser molding helps raise the crown molding so it bonds with the ceiling. Some people like to show space above the cabinets to display decorative items, but if you rather close them off and avoid the buildup of dust, risers will help you close off the space if your crown molding isn't quite thick enough.
What is toe kick molding?
Toe kick molding covers the toe space of the cabinets to cover the exposed wood and allows your feet to stand closer to your workspace. This is both important for functionality and having a clean design. You can either use the same wood as the rest of your cabinets or use a color or material that pops against the rest.
Can you put molding on cabinets?
You can add molding to your cabinets in the same way you would install molding on your wall. Many cabinet companies sell pre-cut molding styles to fit the cabinets for sale, or you can purchase molding and make your own measurements and cuts. Then you simply have to nail and glue the molding in place, allowing the glue to dry overnight.
Can you add molding to kitchen cabinets after installation?
If you notice some unexpected gaps or feel like your cabinets are lacking design elements, you can always introduce molding to your kitchen after the installation without needing to alter the cabinets themselves.
Does crown molding help with spacing?
Cabinet molding can help customize your kitchen project by adding detail or the necessary support that your new kitchen cabinets need. You may have heard of how crown molding adds detail, but did you know that molding can also help guarantee spacing alignment and ensures that there is no exposed wood or noticeable sharp edges after installation?
Can crown molding be installed above cabinets?
Crown molding can either bond with the ceiling or allow for space above the cabinet. If you have high ceilings, we recommend leaving space below your ceiling so your cabinets aren't installed out of reach. x.
Moulding Types
Primary trim is used in most installations. This category includes baseboards, casings, and crown mouldings. Typically, it's the most functional trim since it covers the gaps between two areas, but it can also be highly decorative, setting the style and tone of the room.
Layered Moulding
You can create your own style by layering moulding products together to achieve a look that's all your own.
Traditional Corner Blocks
These products provide a decorative and functional accent. Moulding can be installed with square cuts by simply butting the square end of the moulding to the side of the block or rosette.
Moulding Material Choice and Use
Moulding comes in a variety of species and densities. Understanding the material differences and selecting the right one for your project is key to a successful installation and end result.
Decorative Moulding Types
There are several types of decorative moulding materials to choose from. Installation is basically the same for each.
Wood Substrate Comparison
This chart is a handy reference of the most common wood substrates available. It has details to help you choose the right substrate to meet the demands of your project and budget.
Tools Needed to Install Moulding
In addition to a variety of moulding to fit your style and budget, Lowe’s has all the tools, paint and additional accessories you need to successfully transform your space:
What is molding in a house?
Moldings exist in myriad forms. Each is designed for a specific purpose—framing a door, for example, or providing a visual transition at the junction of walls and flooring. So many types of molding decorate our homes today, it's often difficult to distinguish them—and learn which types you should purchase for your home remodeling project. But here's the good news: You never again have to be confused between batten and baseboard. Scroll through to discover your molding style, once and for all!
What is cove molding?
Also known as coving, cove molding is plain, concave-shaped trim employed where walls and ceilings meet. It can also be used on stairs, at the meeting of risers and treads. In essence, cove may be considered a less ornate version of crown.
What is chair railing?
Chair railing is functional molding meant to protect walls from being damaged by furniture. Of course, it can also serve a purely decorative function, delineating two different types of wall coverings—paint and wallpaper, for instance.
How many inches is baseboard?
Used to trim walls where they join flooring, baseboards usually measure three to five inches. Baseboard styles are usually simple, and accented with a small piece of quarter-round (semi-circular) trim.
What is a batten used for?
Batten, also called board-and-batten, is a wall trim piece used to hide the joint between two pieces of paneling.
What is a casing on a door?
Casing is designed to cover the unfinished gap between walls and door or window frames. Though different variations of door casing styles are readily found, the width of casing usually spans two or three inches.
How tall is a picture railing?
Often combined with crown molding, this type of molding is one or two inches tall and appears seven to nine feet off the floor.
What is the most challenging trim style to install?
DIY Friendly? It would be a good DIY finish carpentry challenge. Profiled base is the most challenging trim style to install because it’s one piece with a profile its entire 3-1/2- to 6-in., making joining tricky. Coped joints are preferred over mitered here because they’ll allow for some seasonal movement of wood and are easier to fit in out-of-square corners.
What is a profiled base?
The most traditional baseboard style, profiled, a.k.a. patterned bases, are just one piece of profiled board. Typically you’d choose the door trim first, then select your profiled base as a matching yet thinner and taller option.
What is baseboard trim?
Baseboard is the trim that defines where the floor ends and the wall begins. It also protects your wall material from the wear and tear of mops and vacuum cleaners. Baseboard is usually thinner than door trim, which is called casing, and at least one-third wider.
What are the different types of baseboards?
The options for baseboard are almost endless, but they can all be divided into three categories: mop boards, two-piece and profiled baseboards.
What is a two piece trim?
Two-piece combines a flat bottom that’s capped with a profiled molding. This type of trim can fit well in any style of home, since variations in the cap can create a different look and feel.
What is mop board?
Mop board, a.k.a. one-piece bases, are flat, sometimes with edge detail. This base can be as simple as a square-edge board, but usually the sharp edge will be rounded over or beveled. Craftsman or contemporary homes trend toward the cleaner lines of mop board.
How high should baseboard be?
Some common heights: 3-1/2- to 5-in. for 8-ft. ceilings; 5- to 7-in. for 9-ft. ceilings; and 6- to 10-in. for 10- to 12-ft. ceilings.
