Magic Chef Range / Stove / Oven Fault Codes
| Failure Code | Fault Code Description | Solution |
| F3 or F4 | Shorted or open oven temperature sensor ... | Check sensor harness and harness connect ... |
| F5 | Watchdog and hardware conflict | Replace clock (ERC). |
| F7 | Function key shorted or stuck | Replace touch pad or if touch pad is par ... |
| F8 | Analog / Digital problem | Replace clock (ERC). |
What does F5 mean on a power button?
F5 - Watchdog and Hardware Conflict - Replace control board (clock). F7 - Function Key Shorted or Stuck - Replace touch pad, or touch pad and control board (clock) if all one assembly. F8 - Analog / Digital Problem - Replace control board (clock).
What does F4 mean on a whirlpool oven?
F3 / F4 - Shorted or Open Oven Temperature Sensor (RTD) - Check the connection between the oven control and oven sensor, as well as the sensor harness. If wiring is ok, replace oven temperature sensor (RTD). F5 - Watchdog and Hardware Conflict - Replace control board (clock).
What does F1 and F2 mean on a Kenmore oven?
F1 - Defective Touch Pad or Control Board (Clock) - Replace either touch pad, control board, or both if all one assembly. Refer to F1 Test for more information. F2 - Oven Temperature Is Too Hot - Replace relay board (if present) or oven temperature sensor (RTD).
What does F1 mean on the touchpad?
F1 - Defective Touch Pad or Control Board (Clock) - Replace either touch pad, control board, or both if all one assembly. Refer to F1 Test for more information.
How do I reset my Magic Chef oven?
To reset a Magic Chef RV oven, disconnect power to it by resetting the circuit breaker. Wait for 30 seconds, then restore power to it.
What does F5 mean on a Frigidaire stove?
Error Code: F0, F1, F5, F6 Solution: These codes indicate a malfunction in the electronic oven control. The electronic oven control (EOC) may also be referred to as circuit board, control board, mother board, ERC, or clock. Unplug the appliance for about 10 minutes to see if the error code will reset itself.
How do you turn on a Magic Chef oven?
Igniting a Magic Chef Oven To light the oven for baking, push in the temperature control knob, hold it for three seconds and then release it. You'll hear the igniter continuing to spark, which is normal. While pushing in the knob again, turn it counterclockwise to the proper temperature before releasing it.
Why does my oven beep and say F5?
A two-digit Whirlpool F5 code is a control board failure, according to Appliance Parts Pros, and the control board will need to be replaced.
What is F5 error code?
An F5 error code indicates that the fan on the outdoor or indoor unit has been running at a very low speed for a set period of time. This occurs when either the controller on the board or the fan malfunctions.
How do I know when my Magic Chef oven is preheated?
Typically, when an oven has finished preheating, an indicator light will shut off, or a light will turn on when the oven reaches the right temperature. You can monitor the preheat cycle with animated timers and symbols on the display.
How do you use a Magic Chef?
0:205:00Cooking Made Simple with Magic Chef - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's got seven different cooking methods in one it's got pressure cook slow cook rice steam searMoreIt's got seven different cooking methods in one it's got pressure cook slow cook rice steam sear yogurt and keep warm right now I'm gonna show off the seer function I'll make it beef stew.
How do you use a Magic Chef electric stove?
Push the oven temperature knob in, and turn the dial to set the desired temperature. Place your baking dish of food in the center of the oven, at least 2 inches away from each oven wall. Close the oven door, and do not open it frequently, as that will increase the cooking time of your food.
How do I reset my Frigidaire oven?
Frigidaire Oven Error Codes But the first thing you should do is try to perform a hard reset by unplugging the oven, waiting about 30 seconds, and then plugging it back in again. In some cases, this will be enough to reset the control board and get your oven working again.
How do I use the self clean on my Frigidaire oven?
Start Self-Cleaning feature Press the up/down arrow for 2 or 3 hours or choose the cleaning level: light, medium, or heavy soiled. Then, the “Door close” light is illuminated and the “CLn” shown on the display. The door locked status and the display will remain the same until the process is finished.
How do you reset the temperature on a Frigidaire refrigerator?
Touch to see the condition of the filters. To reset, press and hold for three seconds. Hold the button for three seconds.
Why is my Frigidaire refrigerator beeping?
Your fridge might beep continuously if the door isn't closed properly. If the door is closed but you still hear beeping, check if you have a dirty or defective door gasket/seal. Press the alarm mute button, then check the door gasket/seal. If it's dirty, clean it and if it's broken, replace it.