Knowledge Builders

what is fogging oil used for

by Josianne Johnston Published 3 years ago Updated 2 years ago
image

STA-BIL® Marine Fogging Oil

  • Coats internal engine components to prevent corrosion
  • Displaces moisture from metal to protect engine
  • Lubricates cylinders to prevent cylinder damage (scuffing) at start up
  • For all 2 and 4 stroke petrol and diesel engines

Applied as an aerosol, fogging oil is designed to prevent rust and protect internal engine components during storage or long periods of inactivity. Engine Fogging Oil offers superior film retention, providing long-term protection against corrosion and dry starts, extending engine life and reducing operating expenses.Nov 19, 2020

Full Answer

What is fogging oil used for?

What Do You Use Fogging Oil For? It utilizes fogging oil by aerosol to prevent rust and protect internal parts when they have been stored. It gives an engine a longer lifecycle and a lower expense of operating when applied Fogging Oil prevents rust corrosion and dry starts for a long period of time and extends engine life.

What is fogging in the cure of concrete?

“Fogging” is a technique where water is atomised and distributed around a room etc to maintain moisture levels in the air, and there effects curing. Fogging, or more commonly known as fog spraying is a stage in curing of concrete floors, where you make sure that there will be no plastic shrinkage cracking in mixes that have low bleeding rates.

What is "fogging" your engine?

Winterize Your Outboard Engine

  • Freshwater flush. ...
  • Empty fuel lines and carburetors. ...
  • Fog the carburetor intake (s) Before the engine runs out of fuel, spray fogging oil into the carburetor (s). ...
  • Drain cooling passages. ...
  • Lubricate linkages and the electric starter drive mechanism. ...
  • Drain and refill gearcase. ...
  • Touch up damaged paint. ...
  • Drain fuel tank and supply lines. ...
  • Stabilize the fuel. ...

More items...

What can I do about fogging gauges?

What You Can Do to Help Stop Fogging? Turning on the instrument with the instrument light “on” will speed up moisture removal. The heat from the light and the electronics increases the temperature inside of the instrument. As the temperature increases the air is circulated around. The increased airflow should clear the lens of any fogging.

image

Do I need to use fogging oil?

If you have any type of vehicle that sits in storage for months at a time, you should look into using fogging oil if you want to protect the engine. This product offers a way to keep inactive engine components from becoming corroded over time.

Can fogging oil damage an engine?

This can lead to corrosion on cylinder walls, pistons, rings, and valves. Once the engine is started again, plenty of bad stuff can result: scoring of cylinder walls, wear on the rings, and even a stuck valve.

How do you use engine fogging spray?

3:427:18Engine Fogging for Long Term or Winter Storage (Outboard Boat)YouTubeStart of suggested clipEnd of suggested clipI'm going to go ahead and remove the spark plugs and I'm going to spray fogging fluid. Directly intoMoreI'm going to go ahead and remove the spark plugs and I'm going to spray fogging fluid. Directly into these the cylinders so that it coats the cylinder wall because they're so hot that they'll burn it

Do you need to fog an engine?

Fogging a boat engine is not completely necessary but is highly recommended. Putting a stabilizer in your gasoline can help reduce the long-term storage issues but is not a guarantee. Essentially, fogging oil is an inexpensive way to better protect your boat engine while it's left idle.

Is seafoam fogging oil?

Sea Foam Spray is a blend of cleaning and lubricating petroleum ingredients that can be used SAFELY in all types of 2 and 4 stroke gasoline engines. Especially important for modern GDI engines, it cleans critical upper engine areas where fuel cleaners can't reach.

How do you lubricate engine cylinders?

3:407:23How the Engine Lubrication System Works - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then the oil will also go through this little hole it's drilled on the side of the connectingMoreAnd then the oil will also go through this little hole it's drilled on the side of the connecting rod and it will spray up into the cylinder walls. Lubricating.

How do you fog a diesel engine?

2:484:29Winterizing Your Marine Diesel - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow start your engine. And run it at idle speed until you see antifreeze discharging from the wetMoreNow start your engine. And run it at idle speed until you see antifreeze discharging from the wet exhaust for 30 seconds or more then turn off your engine. You're done winterizing the cooling system.

How do you lubricate an engine that has been sitting?

If you care about the car, and it's been sitting for years, it's strongly advised that, once you verify that the engine rotates, you lubricate the rings and cylinder walls by removing the spark plugs, squirting oil through the plug holes with a Wizard of Oz-style oil can, and gently rotating the engine a few times.

How do you fog a small engine?

0:541:57Tip of the Week: Fogging small gas engines - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhat you're going to do is cut the engine. Off.MoreWhat you're going to do is cut the engine. Off.

Does fogging damage spark plugs?

Re: Fogging oil effect on spark plugs No damage, sometimes the engine will fire off and burn the oil away. Other times clean them up and reinstall or use them as spares in the tool box.

What is a fogging kit?

Applied as an aerosol, fogging oil is designed to prevent rust and protect internal engine components during storage or long periods of inactivity. Engine Fogging Oil offers superior film retention, providing long-term protection against corrosion and dry starts, extending engine life and reducing operating expenses.

Where do you spray fogging oil in a carburetor?

5:076:52Fogging The Engine - Fuel & Oil Treatment - YouTubeYouTubeStart of suggested clipEnd of suggested clipAround the piston rings by the valves.MoreAround the piston rings by the valves.

What is fogging oil?

Applied as an aerosol, fogging oil is designed to prevent rust and protect internal engine components during storage or long periods of inactivity.

Does motor oil protect against corrosion?

Motor oil provides some protection. Most two- and four-stroke motor oils are formulated to have an affinity to engine component surfaces, acting as a barrier that keeps condensate from contacting engine components and forming corrosion. However, the effectiveness of motor oil in this area diminishes with time.

STORAGE AND FOGGING OIL

Gravity wreaks its havoc on stored engines. Oils and lubricants drain away from cylinder walls, piston rings, and other critical engine components. As the ambient temperature and humidity fluctuate, air vapor can condensate within the engine. Corrosion begins in as little as 30 days.

WHAT IS FOGGING OIL?

Enter fogging oil. What is fogging oil? It is an aerosol petroleum treatment for long-term lubrication and corrosion resistance. When properly administered, it forms a thin film on metal components that, unlike oil, remains intact with time.

HOW TO USE FOGGING OIL

Automotive engine fogging is simple. Consider the administration of STA-BIL’s, top-rated fogging oil. The manufacturer recommends a six-step process:

A COMPLETE ENGINE STORAGE ROUTINE

Fogging oils are often used in tandem with fuel stabilizer additives to completely prepare an engine for long-term storage. How to use fogging oil is not difficult. It can be administered by any DIY enthusiast or, if preferred, by an experienced mechanic. Engine storage and fogging oil go hand in hand.

What is fogging oil?

Re: Fogging Oil- What is it?#N#fogging oil is not specific to marine engines. all engines that are stored including lawnmowers and cars should be fogged. go to an autoparts or even a wal-mart type store. don't pay for a name like merc.

Can marine engines fog oil?

fogging oil is not specific to marine engines. all engines that are stored including lawnmowers and cars should be fogged. go to an autoparts or even a wal-mart type store. don't pay for a name like merc. B.

What is fogging oil?

Fogging oil wraps the internals in a nice blanket of oily goodness as a preventative measure. Although major wear and broken parts are unlikely over just one winter, fogging oil is cheap insurance for the parts you can't easily see. Fogging Oil. Zach Bowman.

How to fog oil?

Most fogging oil comes in a spray can, and application is pretty simple. Tear down what you need to for access to the throttle body (or bodies), and then spray the contents in while the engine's running. In short order, oily smoke (that would be the fog) should start flowing from the exhaust. Shut the engine down—fogging complete.

Can you use fogging oil on a diesel engine?

Fogging isn't recommended for all engines, so let's get some warnings and caveats out of the way first. It shouldn't be used on a diesel, as the oil can ignite and cause a runaway condition. It's also not recommended for direct-injection motors, which includes basically anything sold new today.

Who said "fogging" an engine before long term storage?

Zach Bowman. If only all automotive maintenance projects were supposed to end in a cloud of smoke. Though somewhat hard to believe, that's the intention when "fogging" an engine before long-term storage. The Problem: Moisture.

Does Marvel Mystery Oil work?

Some of these bottled products—Marvel Mystery Oil again —also claim to work as a fuel stabilizer, so you can potentially kill two birds with one stone. If you're still unsure, or you have a newer engine with delicate sensors you'd rather not risk, the other option is starting the engine periodically over the winter.

Is it safe to use catalytic converter oil?

Some products are safe for catalytic converters and other emissions equipment, while others aren't; read the label and look for one that explicitly states it to be sure. If the engine is equipped with a mass-airflow sensor, be sure the oil is added downstream of it.

Can you spray oil into a cylinder after a foggy part?

For added protection, you can pull each spark plug and spray another dose of oil into each cylinder after the foggy part. In a modern engine, with its plastic covers and shoehorned packaging, this can range from "minor pain" to "impossible without major disassembly.". Same goes for some older stuff as well.

image

Problems Associated with Storage

  • Two- and four-stroke recreational vehicles, hand-held power equipment, small engines and construction equipment and farm equipment are commonly operated seasonally or infrequently, then stored for long periods of time. During these periods of inactivity, and as a result of fluctuations in ambient temperatures, water vapor can form condensate within the engine. Whe…
See more on blog.amsoil.com

Motor Oil Provides Some Protection

  • Most two- and four-stroke motor oilsare formulated to have an affinity to engine component surfaces, acting as a barrier that keeps condensate from contacting engine components and forming corrosion. However, the effectiveness of motor oil in this area diminishes with time.
See more on blog.amsoil.com

Benefits of Fogging Oil

  • Applied as an aerosol, fogging oil is designed to prevent rust and protect internal engine components during storageor long periods of inactivity. Engine Fogging Oiloffers superior film retention, providing long-term protection against corrosion and dry starts, extending engine life and reducing operating expenses. Its aerosol spray formulation off...
See more on blog.amsoil.com

Fogging Oil Applications

  • Engine Fogging Oil applications include, but are not limited to, motorcycles, snowmobiles, ATVs, outboard motors, stern drive and inboard marine engines, personal watercraft, lawn equipment, chainsaws, snowblowers, portable generators, hand-held power equipment, motor scooters, powered farm equipment, powered construction equipment, cars and trucks. So, to answer the q…
See more on blog.amsoil.com

1.Fogging an Engine: Proper Use of Fogging Oils | Gold …

Url:https://www.goldeagle.com/tips-tools/fogging-engine-proper-use-fogging-oils/

24 hours ago What is fogging oil used for? Start the engine and remove the air filter. While the engine is running, spray STA-BIL fogging oil into the air intake of each cylinder. After 10 seconds, shut off the engine. Remove the spark plugs – carefully!

2.What is Fogging Oil? – AMSOIL Blog

Url:https://blog.amsoil.com/what-is-fogging-oil/

11 hours ago Fogging oil is used during preparations for engine storage. The fogging oil may be sprayed into the air intake while the engine is running, as well as directly into the cylinder after the engine is stopped, to coat the cylinder, piston, and valves in order to prevent corrosion.

3.Fogging Engine: Proper Use Of Fogging Oils - Oil Drip

Url:https://oildrip.com/fogging-engine-proper-use-of-fogging-oils/

36 hours ago Other engine fogging uses include: • Outboard motor: Spray fogging oil into the carburetor before the engine runs out of fuel. • Inboard motor: Spray fogging oil into the air intake just before the engines starves out of fuel.

4.Fogging Oil- What is it? | Boating Forum - iboats Boating …

Url:https://forums.iboats.com/threads/fogging-oil-what-is-it.9637/

25 hours ago  · A good thing to do is get ya some engine "tuner", do a decarb as listed on can, and then use fogging oil, which is srayed through the carbs directly while the engine is running...some models have a fitting to connect the fogging oil can to. You actually "kill" the engine with the fogging oil, as it coats all internal parts of the engine for storage to inhibit rust.

5.How to Use Fogging Oil for Your Car Engine Before Long …

Url:https://www.roadandtrack.com/car-culture/buying-maintenance/a24534/winter-storage-getting-your-engine-all-oil-fogged-up/

17 hours ago STA- BIL Fogging Oil is an aerosol propelled oil treatment to protect internal engine components during storage. This fogging oil can be sprayed to coat internal engine components and prevent corrosion. Subsequently, question is, how do you use Stabil fogging oil? Usage Directions: Start engine and remove air filter. Spray fogging oil into air intakes of running engine.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9