Full Answer
What is a furniture base?
Instead, as the name would suggest, it mimics a profile typical of furniture or wall base (a couple of trim pieces that trace the bottom). There is no extra toe room provided by furniture base, but we haven’t found this to be a major issue for people.
What is base molding on kitchen cabinets?
Base Molding Base Molding is generally used to provide a decorative trim at the floor level of base cabinets by installing it with the profiled edge facing up. It completes the lower sections of panel skins used on islands and peninsulas to give them a more furniture-like feel.
Does the furniture base recede?
Furniture base does not recede. Instead, as the name would suggest, it mimics a profile typical of furniture or wall base (a couple of trim pieces that trace the bottom). There is no extra toe room provided by furniture base, but we haven’t found this to be a major issue for people.
Why is there mold on my furniture?
The first goal is determining whether the mold is due to excess humidity or a liquid water leak/intrusion. In most cases, mold on the furniture is due to a combination of excess humidity and poorly insulated exterior walls.
What is cabinet base Moulding?
Cabinet moulding, sometimes spelled cabinet molding, is a long, narrow decorative piece of wood that is used to give cabinetry a customized look. It can be used to cover the space between the cabinets and the ceiling, installed atop or below a cabinet, or inserted into the cabinet front.
What is a base in furniture?
Design. Often referred to as plinth or platform furniture, these pieces boast solid bases (usually wood, but they can also be other materials like marble or brass) with no discernible “legs,” and are lower to the ground than their leggy counterparts.
What is a furniture base on island?
However, if you're planning on an island in your kitchen and you want it to look like a furniture piece, you should opt for furniture base. Furniture base does not recede. Instead, as the name would suggest, it mimics a profile typical of furniture or wall base (a couple of trim pieces that trace the bottom).
What is the trim at the bottom of cabinets called?
#8 – Bottom Molding Molding at the bottom of the base cabinet doors and above the toe kick is also known as bottom molding. This molding can be used on kitchen islands to make them appear more like furniture.
How do you attach molding to furniture?
0:382:03Update Plain Furniture with Prefinished Moulding - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd style that we want we'll cut the pieces we need and tack them on you might want to use a littleMoreAnd style that we want we'll cut the pieces we need and tack them on you might want to use a little liquid nails here as well.
What is a plinth base in furniture?
It is a plinth base, and it has become very popular in all types of design spaces. A plinth is defined as an architectural detail, usually a box or a platform in which, historically a column rests on. It adds a unique modern detail to a space. Here are some of our favorite spaces that incorporate plinth bases.
Are kitchen islands just base cabinets?
Kitchen islands are more than just base cabinets and can be transformed for many purposes, including shelving for decor and cookbooks. If you're thinking of building a DIY kitchen island with cabinets or looking for a professional to design one for you, here are a few things to keep in mind.
What is the best material for a kitchen island?
Quartz is a very strong, nonporous option for kitchen islands. It resists heat, water, bacteria and stains without sealing, making it very easy to maintain. Quartz countertops are simple to clean, offer a wide range of tones and have consistent colors and patterns.
Do kitchen islands add value?
Real estate investor and home flipper Donald Olhausen, owner of WeBuyHousesInSanDiego, says adding a kitchen island is one of the best ways to increase the value of your kitchen when embarking on renovations.
What do you put on the bottom of kitchen cabinets?
Liners protect the bottoms of your kitchen cabinets from spills, dents and scratches, but a cabinet storage system also reduces the risk of damage. In deep cabinets, install sliding wire drawers to hold pots and pans. The drawers allow easy access to heavy cookware without dragging it across the floor of your cabinets.
What is riser molding for cabinets?
A Starter or Riser Molding is used as a mounting frame for Crown Molding in order to increase the overall height of a Crown Molding assembly, or allow it to rise flush to the ceiling. Ceiling heights are variable and Crown Molding is rarely the exact height required to fit the overall space.
What is cabinet fascia?
Fascia is typically any piece of wood used to finish off the front edge of a countertop on a set of base cabinets. Its face can be left exposed to highlight the wood's grain patterns or it may be covered with a plastic laminate or tile.
What are the different types of table bases?
Table bases will be made from several different materials. The most common are stainless steel, steel, iron, aluminum and wood. Stainless steel bases are great for restaurants, kitchens and outdoor tables. This is because stainless steel is rust resistant.
How do you make a dresser base?
1:187:02How I make my custom wood bases // furniture flipping // furniture makeoverYouTubeStart of suggested clipEnd of suggested clipI start by measuring the length. And the width of the dresser. And then i like to make my actualMoreI start by measuring the length. And the width of the dresser. And then i like to make my actual base about a quarter inch smaller than the base of the dresser.
What is the best frame for a sofa?
The FrameThe best frame is made out of kiln-dried hardwood. ... In a good-quality frame, the joints get special attention. ... Generally speaking, plywood and particleboard frames are inferior, especially if they are held together with staples.
What is a platform foundation in a couch?
Platform foundation sofas are sofas that are simply built with boxy frames and comfy cushions. These types of sofas provide a vibrant minimalist yet classy look to any sort of formal or informal setting.
Embellishments
Product photography and illustrations have been reproduced as accurately as print and web technologies permit. To ensure highest satisfaction, we suggest you view an actual sample from your dealer for best color, wood grain and finish representation.
Where to Buy
Once you've found the door you love, use our convenient tool to find a location near you to buy Kitchen Craft Cabinetry.
Why is molding important in kitchen cabinets?
Molding is an important detail and finishing touch for kitchen cabinetry. Molding improves the overall effect of the kitchen by creating a custom and polished look. There are several different kinds of molding options available. Depending on your design preferences and selected cabinets the options are almost limitless.
What is crown molding?
Crown Molding is used to finish the tops of tall and wall cabinets. All Cabinets.com cabinet door styles are Full Overlay - this means the doors overlap the front face frame of the cabinet box, leaving only a small amount visible. Since this visible reveal will vary depending on the specific cabinet line you choose, cabinets that have smaller reveals may require the Crown Molding to be installed on top of the cabinet frame instead of to the face, secured with blocking from behind. Crown is available in various styles and sizes to accommodate different design styles and ceiling heights.
What is light rail molding?
It can function as a trim to conceal under-cabinet lighting fixtures and provide a barrier from the light glare, or simply serve as a decorative enhancement . Light Rail Moldings are available in a variety of styles and sizes to accommodate different design styles. When selecting a Light Rail Molding, be mindful of the molding height to ensure the open space left after installation will accommodate any countertop appliances.
What is toe kick molding?
After installation, a finished Toe Kick Molding is applied to cover an entire run of unfinished toe space. Toe Kick Molding is a 96” long strip of finished covering that is field-cut and positioned in the recess to provide a continuous completed look to the cabinetry.
Why does mold grow in wood?
Due to the low humidity in your environment , this growth likely occurred at the factory. After the wood is dried, the mold growth stops. What you’re seeing is the lingering staining from the prior growth. This is a fairly common issue with lumber and does not pose a health concern.
What would cause mold on my dresser in a carpeted room?
In most cases, mold on the furniture is due to a combination of excess humidity and poorly insulated exterior walls. When a dresser is right against an exterior wall, the airflow is restricted and condensation can form. In time, this condensation creates an environment conducive to mold growth.
Is the mold growing on furniture in the middle of the room?
This is caused by extreme humidity (70%+). If you live in a hot/humid climate, you’ll need to utilize your air conditioner to drop the humidity. If you live in a cool climate (and the problem occurs in the winter), you can lower the humidity by improving your ventilation and raising the heat.
What happens when a dresser is right against the wall?
When a dresser is right against an exterior wall, the airflow is restricted and condensation can form. In time, this condensation creates an environment conducive to mold growth. Try to keep your humidity beneath 55% during the winter months.
Why does mold grow in concrete?
This is almost certainly mold growth. Occasionally a white substance can occur due to efflorescence, but this only happens on masonry, concrete, etc. The widespread pattern of growth indicates high humidity throughout the room. This can be caused by poor ventilation, inadequate air conditioning or a flooding event. If there are no signs of a flooding event, it’s due to humidity. In regards to the insurance company’s claim the humidity levels are normal, this could simply be due to the timing of the inspection. It’s quite possible the growth occurred during a high humidity period but the levels had returned to normal the day the insurance adjuster visited the home. Mold growth will become inactive when the humidity/moisture levels return to normal, but the visible growth will not disappear.
Why does mold grow on painted walls?
In this case, the mold growth is likely feeding off the settled dust that has accumulated on the painted surface. Mold growth like this only occurs in rooms with very high humidity levels.
How to clean mold off wood?
The latter tends to aerosolize the mold particles throughout the room. When damp wiping, use disposable paper towels and a basic detergent/cleaning solution. You don’t need to worry about the ability of the cleaner to ‘kill’ the mold, you’re goal is to physically remove it from the surface.
What is molding trim?
34 Common Types of Molding / Trim. The term molding is generally used to describe sawed timber that has been dressed or planed on all four sides. Molding commonly involves adding profile to at least one side of a piece of timber. In trade however, pieces that do not have any profile, but have been planed on all four sides (S4S) ...
Where do crown moldings meet?
Crown Moldings are used where walls and ceiling meet. It is also used to cover large angles. Always sprung.
What is a S4S molding?
In trade however, pieces that do not have any profile, but have been planed on all four sides (S4S) are also classified as moldings.
What is mullion casing?
Mullion Casing. The strip which is applied over window jamb edges in a multiple opening window. It is sometimes called a Panel Strip. Mullion Casing is also used for decorative wall treatments.
What is an outside corner guard?
Outside (OS) Corner Guard is used to protect corners or to cover ragged edge where wall covering and painted surfaces meet at outside corner.
What is a base shoe?
Base may be referred to as One, Two or Three-Member. Base Shoe and Base Cap are used to conceal uneven floor and wall junctions.
What is a corner joiner?
Joins two walls at inside corner. Solves the problem of uneven joints where butted panels, wall paper, painted or contrasting surfaces meet. Gives corners a decorative finished look.
What is trim molding?
This is a common question, and the answer is pretty simple. TRIM is a general term that refers to all molding in a home (i.e. window casing, door casing, baseboards, etc.).
What is MDF wood?
MDF. MDF (Medium Density Fiberboard) is a VERY popular choice in many homes … primarily because it is easy to work with and very economical (as compared to solid wood)! MDF is machine made, so the pieces come in uniform sizes and shapes. This eliminates time searching for uniform solid wood pieces.
What is a trim?
TRIM is a general term that refers to all molding in a home (i.e. window casing, door casing, baseboards, etc.). MOLDING (or moulding) is a broad classification of millwork (any type of woodwork that is produced in a mill … typically decorative) in the home that adds non-structural details (or ornamentation) and beauty to a room.
What is window casing?
Window casing is the functional (and decorative) molding used to frame your windows.
What is the best wood for molding?
SOLID WOOD. Solid wood molding is another popular choice, but does come with a much higher price tag! It is the most natural option for your home … however, with NATURAL comes imperfections! Solid wood bulges and warps, so it can be time-consuming to find pieces that are consistent in size and shape.
Is MDF machine made?
MDF is machine made, so the pieces come in uniform sizes and shapes. This eliminates time searching for uniform solid wood pieces. MDF also can bend which makes it easier to install on walls that aren’t entirely flat.
Is MDF natural or natural?
It is the most natural option for your home … however, with NATURAL comes imperfections! Solid wood bulges and warps, so it can be time-consuming to find pieces that are consistent in size and shape. Wood also has a tendency to split (whereas MDF does not). Surprisingly, it can be easier to install than MDF.
What is Orac baseboard moulding?
The Orac Baseboard Moulding is bolstered by the sharp corners and perfect proportions, two of the fundamental elements of artisanal craftsmanship. This profile is ideal for accentuating the transition from floor to ... Read More
Can you install faux wood beams over wood?
Our faux wood beams capture the rustic nature of authentic timber at a fraction of the cost and installation time. These hand-painted, lightweight high-density polyurethane beams are simple to install over a wood bl ... Read More
Is baseboard strong?
These baseboards are lightweight, yet very strong to withstand the impact of everyday living (vacuum cleaners, kids, etc.). The lengths make them easy to work with so you can install them quickly and they are very c ... Read More
