what is gatorbar

What is the difference between gatorbar and rebar?

Gator Bar is a lighter, stronger, and better priced alternative to steel rebar, GatorBar is a composite material comprised of a fiber (carbon, glass, aramid, basalt) that provides strength and stiffness, and a matrix (polyester, epoxy, vinyl ester) that protects and transfers load between the fibers. It is primarily used to reinforce concrete.

Who is the authorized dealer of gatorbar?

Crete Ready Foam is an authorized dealer of Neuvokas Corp's GatorBar™. GatorBar™ is an alternative to steel rebar that has the following features: Lighter than steel rebar (25 pieces of GatorBar weighs around 47 lbs.)

How much does gatorbar weigh?

Lighter than steel rebar (25 pieces of GatorBar weighs around 47 lbs.) And More! Have questions or ready to place an order? Call 605-539-1175.

What are the advantages of gatorbar over steel?

In addition to low cost, GatorBar boasts many other advantages over steel: What sizes does GatorBar come in? Currently, we have (#3) 3/8 inch bar readily available. Note that, (#3) 3/8 inch GatorBar can replace (#4) 1/2 inch steel rebar in many applications due to its high strength.

What is Gator rebar?

Gator Bar is a lighter, stronger, and better priced alternative to steel rebar, GatorBar is a composite material comprised of a fiber (carbon, glass, aramid, basalt) that provides strength and stiffness, and a matrix (polyester, epoxy, vinyl ester) that protects and transfers load between the fibers.

Is Fiberglass rebar better than steel?

Glass fiber reinforced polymer (GFRP) was used as an alternative material to the steel rebar. It is lightweight, no-corrosion, superior tensile strength, and high mechanical performance. Installation of the GFRP rebar is similar to steel rebar, but with less handling, transporting and storage problems.

What is FRP rebar?

FRP (Fiberglass Reinforced Polymer) Rebar is a spiral wrapped structural reinforcing rod made from a combination of fiberglass roving and resin.

What is Pinkbar rebar?

PINKBAR® Fiberglas™ Rebar is a superior reinforcement material for concrete applications including parking lots, sidewalks, patios, pool decks and driveways. Estimate how much rebar you need for your concrete slab on grade by entering the dimensions, desired rebar spacing and your labor costs below.

What is the strongest type of rebar?

Reinforcing bar or “rebar” is available in a complete range of standard sizes, and #18 rebar is one of the largest and strongest. Rebar works to provide additional stability to concrete structures by reducing the weight load the concrete must bear and enhancing its inherent tensile strength.

Is it better to weld or tie rebar?

For almost every intent, purpose, or code, tying rebar has become the standard way of securing your rebar together. Why? Tying keeps the rebar cool, so you don't have structural issues down the road.

Is FRP stronger than steel?

Pound for pound, our FRP structural members are stronger than many steels in the lengthwise direction, and weigh up to 75% less. Compared to steel, Bedford FRP offers these advantages: The strength of steel at 1/4 the weight. Simple fabrication with standard tools — no welders or cutting torches.

Is FRP or PP better?

PP is highly flammable with very high smoke contributions and smoke toxicity. Thermal behaviour FRP has limited thermal elongation. This allows more accurate assemblies tolerances and so better pumps efficiency performances.

Which is Better FRP vs GRP?

The mechanical strength and elasticity of the plastics in FRP are made richer by including other materials. It is highly resistant to heat and other corrosive substances. While FRPS is used widely in automotive, aerospace and the construction industry; GRP is more popularly used in the power industry.

Why is epoxy coated rebar being banned?

Epoxy coated rebar was a trap, and is now being banned around the world. Paradoxically, the epoxy coat can make corrosion worse than the bare steel, let alone galvanised.

What is are the 4 types of steel used for rebar?

Types of RebarCarbon Steel Rebar. Carbon steel rebar is the most common type of rebar used in residential and commercial projects. ... Stainless Steel Rebar. ... Galvanized Rebar. ... Glass Fiber Reinforced Polymer (GFRP) Rebar. ... Epoxy Coated Rebar. ... Welded Wire Fabric (WWF) Rebar. ... Expanded Metal Rebar. ... Related Posts.

Can you bend Pinkbar?

Can you bend PINKBAR®+? PINKBAR®+ cannot be bent in the field. However, standard bends such as 90-degree corners, lap spliced to straight lengths are available. Lap splice lengths are determined by ACI 440 design codes.

Does fiberglass last longer than steel?

Compared to steel, fiberglass is far more durable in exposed and extreme environments. It can withstand extreme heat and cold without warping and is extremely resistant to rust and corrosion.

Is fiberglass rebar more expensive?

FRP costs around 15% to 25% more than steel and can't be bent in the field. The extra money spent on FRP can, in part, be recouped through less labor as they are lighter and, thanks to their strength, fewer bars are required. Another option, especially for salt-exposed areas is hot-dipped galvanized rebar.

What do you use fiberglass rebar for?

Fiberglas™ Rebar is a reinforcing material intended to be used in concrete to replace traditional steel type reinforcement. Made from fiberglass rovings to give the material it's strength, and a vinyl ester resin to ensure its long life, Fiberglas™ Rebar has been used for over 20 years with excellent results.

How much stronger is fiberglass than steel?

However, as with aluminum, industrial fiberglass outstrips steel in terms of strength-to-weight ratios, representing a weight decrease of as much as 75%.

Where should gator bars be stored?

GatorBar should be stored above the surface of the ground on skids or pallets. If it must be stored outside, we advise that you place a tarp over it, as UV rays may damage the performance of the bars over time.

What blade to use for gator bar?

GatorBar can be cut with a high speed grinding cutter, fine blade saw, diamond blade, or masonry blade. Proper safety equipment including gloves and goggles hould be worn when cutting.

How many feet of gatorbar has Neuvokas made?

Neuvokas has produced over 25,000,000 feet of GatorBar since 2016 which has been sold and installed across the United States and Canada.

What is FRP rebar?

So, what exactly is FRP rebar? It’s a composite material comprised of a fiber (carbon, glass, aramid, basalt) that provides strength and stiffness, and a matrix (polyester, epoxy, vinyl ester) that protects and transfers load between the fibers. It is used to reinforce concrete.

What is the best rebar for concrete?

Excellent for concrete counter tops! 1 Rust-free FRP rebar at the price of steel 2 Higher tensile strength means that (#3) 3/8″ GatorBar can replace (#4) 1/2″ steel rebar 3 2x stronger with 7x weight advantage 4 25 pieces of Gator Bar = just 47 lbs 5 Pre-tied grids can be carried by two people 6 Lower transport cost and hassle 7 Springs back and stays centered

What is a Gatorbar FRP?

GATORBAR FRP is made of the highest quality basalt fiber and epoxy resin. GATORBAR meets and exceeds the applicable ACI/CSA standards. Stronger, lighter and rust-free!

Is gatorbar better than steel?

By using GatorBar, your project will be higher quality, your construction site will be safer, and your carbon footprint will be smaller. ENDURANCE - LASTS LONGER THAN STEEL. Rebar from GatorBar FRP is inherently corrosion resistant. Steel rebar expands as it corrodes; it destroys the very concrete it was meant to reinforce.

Is gatorbar more elastic than steel?

GatorBar is much more elastic than steel rebar – meaning it can take more stress and still return to its original shape. #4 steel rebar becomes permanently deformed at 7,800 lbs of stress. #3 GatorBar becomes permanently deformed at 16,000 lbs. Which would you rather have underneath a busy driveway or in a foundation poured in a region with expansive clay?

Does gatorbar rust?

Well you don’t have to worry about that with GatorBar rebar. Because GatorBar does not contain any steel or iron, it does not rust. Even if exposed to the elements, you will not experience those ugly rust streaks.

Is gatorbar cheaper than steel rebar?

GatorBar is competitively priced with steel rebar and in many cases less expensive. #3 GatorBar is about the same price or slightly less than #3 steel rebar. However, #3 GatorBar actually replaces #4 steel rebar because it is stronger. #3 GatorBar is almost universally less expensive than #4 steel rebar. So not only are your saving labor cost with GatorBar, you are also saving money on material.

What is FRP rebar?

FIBER REINFORCED#N#POLYMER (FRP) REBAR 1 Rust-free FRP rebar at the price of steel 2 Higher tensile strength means that (#3) 3/8" GatorBar can replace (#4) 1/2" steel rebar

Is it a nobrainer to tie up a lot of bar?

For any company that ties up a lot of bar or a little it’s a NO BRAINER even if steel comes back down in $$$ we won’t go back to steel for our flat work.