What is HFC 227ea used for?
HFC-227ea is used in fire suppression systems that protect data processing and telecommunication facilities, and in fire suppression of many flammable liquids and gases. HFC-227ea is categorized as a Clean Agent and is governed by NFPA 2001 - Standard for Clean Agent Fire Extinguishing Systems.
What is the HFC-227ea fire extinguishing system?
HFC-227ea fire extinguishing system is a kind of fire extinguishing system using heptafluoropropane fire extinguishing agent. The extinguishing agent can be used to replace Halon 1301 in various applications, and the fire extinguishing effect is very satisfactory. It is odorless, colorless and non-conductive.
What is the NOAEL for HFC-227ea?
HFC-227ea is categorized as a Clean Agent and is governed by NFPA 2001 - Standard for Clean Agent Fire Extinguishing Systems. Effective fire suppression requires introducing a concentration of the HFC-227ea agent between 6.25% and 9% depending on the hazard being suppressed. Its NOAEL for cardiac sensitization is 9%.
Does HFC 227ea destroy ozone?
The HFC-227ea fire suppression agent was the first non-ozone-depleting replacement for Halon 1301. In addition, HFC-227ea leaves no residue on valuable equipment after discharge. HFC-227ea contains no chlorine or bromine atoms, presenting no ozone depletion effect.
How does HFC-227ea work?
HFC-227ea literally removes heat energy from the fire to the extent that the combustion reaction cannot sustain itself. Additionally, there is a chemical extinguishing action contributed by HFC-227ea. Trace amounts of free radicals are released in a fire, ultimately inhibiting the chain reaction of combustion.
What is HFC fire extinguisher?
Hydrofluorocarbon (HFC) clean agent is a chemical compound that suppresses Classes A, B and C fires without water or harmful chemical residue. In 1994, HFC clean agents largely replaced chlorofluorocarbon (CFC) halon agents, which cause ozone damage.
What is HFC-227ea gas?
PERFORMANCE HFC-227ea is an effective fire extinguishing agent that can be used on many types of fires. It is effective for many surface fires, such as flammable liquids, and most solid combustible materials. On a weight-of-agent basis, HFC-227ea is a very effective gaseous extinguishing agent.
Is HFC-227ea a FM-200?
FM-200™, also commonly known as HFC-227ea, is a clean agent fire suppressant for Class A, B, and C fires and meets NFPA Standard 2001 Clean Agent Fire Extinguishing Systems. Clean agents are fast and effective in suppressing fires, are safe in occupied spaces, and do not leave a residue.
What is AFFF fire extinguisher?
Aqueous Film Forming Foam (AFFF) is a fire suppressant used to extinguish flammable liquid fires such as fuel fires. AFFF is often used in shipboard and shore facility fire suppression systems, fire fighting vehicles, and at fire training facilities.
What are the types of fire extinguishers?
The six main fire extinguisher types are water, foam, CO2, powder, water mist and wet chemical. Each of the different types of fire extinguisher is suitable for different fire classes. It is important that you purchase the right fire extinguisher for your needs.
What does FM-200 stand for?
HeptafluoropropaneFM-200® (Heptafluoropropane) is a compound of carbon, fluorine and hydrogen (CF3CHFCF3). HFC-227ea is a fast acting clean agent fire suppression gas with a wide range of benefits and applications.
Why is it called FM-200?
FM200 is the commercial name given to it by its makers, DuPont. Its technical name is 'heptafluoropropane' and it is a colourless, odourless halocarbon.
How does FM-200 put out a fire?
FM-200 extinguishes a fire primarily through Heat Absorption that occurs as the agent changes from a liquid to a vapor during discharge. In addition, FM-200 also disrupts the combustion reaction which aids in the extinguishment of a fire. FM-200 does not use the depletion of oxygen to extinguish a fire.
What is FM-200 made of?
FM-200™, also known as HFC-227ea or a heptafluoropropane, is a compound made up of carbon, fluorine, and hydrogen (CF3CHFCF3) and is produced by Chemours. It can be used in a wide variety of applications to provide fast-acting fire suppression.
What is the difference between FM-200 and CO2?
An FM 200 system is an environmentally friendly, odorless, and clean fire suppression system. Not to be confused with a CO2 System, FM 200 fire suppression systems are electrically non conductive and safe for humans.
What is the best fire suppression system?
FM-200 is the best fire suppression system for a number of situations, including: Offices or other places where people may be present during a fire. FM-200 is non-toxic, and the health impact of a fire suppression system is always important in areas where crowds are frequent.
Is CFC used in fire extinguisher?
Traditionally, fire extinguishers have utilized halogens (CFCs), which today are well-known ozone-depleting agents. They also harm aquatic systems and contaminate water supplies.
What is clean agent fire extinguisher used for?
Clean agent extinguishers act to extinguish a fire by smothering effect. As the extinguishing agent does not conduct electricity back to the user, they are most effective on electrical fires.
Which chemical is used in clean agent fire extinguisher?
It is a gaseous solution of 60-80% tetrafluoroethane (R-134a), 10-30% pentafluoroethane (R-125) and 10-30% carbon dioxide (CO2). The Clean agent FS 49 C2 is an extinguishing gas mixture that suppresses fire while maintaining breathable concentrations of oxygen in the air.
Which fluorocarbons is used as extinguisher?
HFC-236fa is primarily used in portable fire extinguishers and large flight line wheeled unit extinguishers. The F-Gas Regulation banned the use of HFC-23 from 2016, due to its very high global warming potential and the availability of alternative fire suppression systems.
What are the components of HFC-227ea?
HFC-227ea Storage Components - Storage components consist of the cylinder assembly (s)，which contains the HFC-227ea chemical agent, and the cylinder bracket (s), which holds the cylinder assembly securely in place.
What is the SP series fire extinguisher?
The SP Series Clean Agent Fire Extinguishing System utilizes HFC-227ea as the extinguishing medium. HFC-227ea is a colorless, non-toxic gas perfectly suited to protect high value assets in areas that may be normally occupied, in locations where clean-up of other agents is problematic, when storage space for a fire suppression agent is restricted, or when an electrically non-conductive agent is required. Each system consists of the following components and their associated accessories:
What is HFC-227eA used for?
Hochiki's HFC-227ea by Chemori, is a safe and effective fire extinguishing agent that is used for total flooding fire suppression systems. HFC-227ea is stored as a liquid and dispensed into the hazard as a colorless, electrically non-conductive vapor that is clear and does not obscure physical vision. It leaves no residue and has acceptable toxicity for use in occupied spaces at design concentration. Hochiki HFC-227ea is suitable for use on Class A, Class B, and Class C fires, does not displace oxygen, has zero ozone-depleting potential, and low global-warming potential with a short atmospheric lifetime. It contains no chlorine or bromine and fully complies with NFPA 2001 and ASTM D6064 standards. Cylinder sizes range from 20 lb. up to 1,200 lb., and each cylinder is pre-filled according to specific de-sign flow calculations for the hazard. Common applications include computer and server rooms, libraries, telecom-munications, medical facilities, vehicles, and much more.
How many pound increments for 227ea?
1. Each of the basic sizes can be filled with one pound increments to meet the exact amount of -227ea Clean Agent required, within their fill ranges.
What is a clean agent cylinder?
The Clean Agent cylinders are manufactured, tested and stamped in accordance with DOT 4BW500 or DOT 4BA500. All cylinders are equipped with a back pressure type valve. A piston in the valve bore is equipped with a rubber seal that keeps the HFC-227ea Clean Agent under pressure within the cylinder. A small hole in the piston allows cylinder pressure to be equalized on both sides of the piston. Since the area at the top of the piston is greater than the area at the bottom of the piston, the net force seals the piston against the valve discharge outlet. When the cylinder pressure on the top of the piston is relieved by means of automatic or manual activation, there is only cylin-der pressure acting against the piston seal, and the piston slides to it’s full open position, allowing cylinder discharge through the distribution piping network.
What is a Chemori discharge nozzle?
Chemori Discharge Nozzles are designed to control the flow of Clean Agent in a uniform, pre-determined pattern and concentration. The nozzles are intended to finish the release of Clean Agent in 10 seconds or less when introduced within the design limitations as stated in the Installation Instruction Manual.
What is FM 200?
FM-200® Agent (1,1,1,2,3,3,3-heptafluoropropane) is a compound of carbon, fluorine and hydrogen (CF3CHFCF3) . It is colorless, odorless and electrically non-conductive. It suppresses fire by a combination of chemical and physical mechanisms without affecting the available oxy-gen. This allows personnel to see and breathe, permitting them to leave the fire area safely. FM-200 Agent has acceptable toxicity for use in occupied spaces when used as specified in the United States Environmental Protection Agency (EPA) Significant New Alternative Policy (SNAP) program rules. Although FM-200® Agent is considered non-toxic to humans in concentrations necessary to extinguish most fires, certain safety considerations should be observed when applying and handling the agent. The discharge of FM-200® Agent may create a hazard to personnel from the un-decomposed agent itself and from the decomposition products which result when the agent is exposed to fire and other hot surfaces. Exposure to the agent is generally of less concern than is exposure to the decomposition products. Unnecessary exposure to the agent or the decomposition products should be avoided.
What materials are unaffected by FM 200?
Most materials such as steel, stainless steel, aluminum, brass, and other metals as well as plastics ,rubber and electronic components are unaffected by exposure to FM-200 Agent. FM-200® Agent is used in total flooding fire suppression systems.
Is FM 200 toxic?
Although FM-200® Agent is considered non-toxic to humans in concentrations necessary to extinguish most fires, certain safety considerations should be observed when applying and handling the agent.
Is FM 200 the same as Halon 1301?
In tests, the acute toxicity of FM-200® Agent was shown to be equivalent to that of Halon 1301. FM-200® Agent has been evaluated for cardiac sensitization through test protocols approved by the US EPA. The EPA’s SNAP Program classifies FM-200® Agent as acceptable for use as a total flooding agent in occupied spaces. Refer to the SNAP program rules for more information.
What is the HFC-227ea fire suppression agent?
The HFC-227ea fire suppression agent was the first non-ozone-depleting replacement for Halon 1301. In addition, HFC-227ea leaves no residue on valuable equipment after discharge.
What is HFC-227ea used for?
HFC-227ea finds use in fire suppression systems in data processing and telecommunication facilities , and in protection of many flammable liquids and gases. HFC-227ea falls in the category of Clean Agents and is governed by NFPA 2001 - Standard for Clean Agent Fire Extinguishing Systems. Effective fire suppression requires introducing a concentration of the HFC-227ea agent between 6.25% and 9% depending on the hazard being suppressed. Its NOAEL for cardiac sensitization is 9%. The United States Environmental Protection Agency allows concentration of 9% volume in occupied spaces without mandated egress time, or up to 10.5% for a limited time. Most fire suppression systems are designed to provide concentration of 6.25-9%.
What is the name of the gas used in fire suppression?
1,1,1,2,3,3,3-Heptafluoropropane, also called heptafluoropropane, HFC-227ea ( ISO name), HFC-227 or FM200, as well as apaflurane ( INN ), is a colourless, odourless gaseous halocarbon commonly used as a gaseous fire suppression agent.
How long does HFC-227ea last?
Its atmospheric lifetime is approximated between 31 and 42 years. It leaves no residue or oily deposits and can be removed by ventilation of the affected space. As an aerosol propellant, HFC-227ea is used in pharmaceutical metered dose inhalers such as those used for dispensing asthma medication.
How much volume can a fire suppression system hold?
Most fire suppression systems are designed to provide concentration of 6.25-9%.
Is HFC-227ea a controlled substance?
Due to its high GWP, the HFC-227ea has been included in the list of controlled substances of the Montreal Protocol (2016 Kigali amendment, in effect in January 2019). Under EU regulations, production, imports and sales of HFC-227ea in spray cans such as freeze sprays or dusters have been prohibited since 2014, as the GWP is over the limit of 150 for these applications.
Does heptafluoropropane decompose?
Safety. At high temperatures, heptafluoropropane will decompose and produce hydrogen fluoride. This is observable as presence of sharp, pungent odour, which can be perceived in concentrations far below a dangerous level. Other decomposition products include carbonyl fluoride, carbon monoxide and carbon dioxide.
What is the replacement for Halon 1301?
Fike’s Clean Agent Fire Suppression Systemsare great in applications ranging from telecommunications and data processing to switch gear rooms, military applications and cell sites to high-tech medical applications. HFC-227ea fire suppression is also a widely accepted replacement for Halon 1301.
Does FM 200 leave residue?
Learn how the the FM-200 Clean Agent Fire Protection System (HFC-227ea) leaves no residue and doesn’t require costly clean-up.
Is Fike still in business?
Fike Corporation and subsidiaries remain open for business globally. Our factories remain at full production and are shipping product as normal.
Does HFC 227ea require clean up?
Our Clean Agent Fire Protection System, which includes the use of HFC-227ea and FM-200, leaves no residue and doesn’t require costly clean-up, unlike sprinklers and other fire protection systems.
Does Fike penalize H1 distributors?
COVID-19 NOTICE: Due to the novel coronavirus outbreak, Fike will not penalize our distributor partners for H1 performances that fell below original targets.
