What does LF stand for on a whirlpool washing machine?
Whirlpool Washer LF Error is a water fill error, it stands for Long Fill. It means that the main control has not gotten a signal back from the water pressure sensor which means that water is not filling the tub or not filling the tub fast enough. The control will shut down the cycle and report the LF error.
What does Whirlpool duet washing machine error code LF mean?
NO WATER IS DETECTED entering the washing machine. The error code LF relates to WATER FLOW ISSUES. This means a problem occurs because WATER IS NOT PROPERLY SUPPLIED to the washer. Similarly, how do I fix the code on my Whirlpool Duet washer? LF in the display Check the water inlet hoses
What are the error codes for a whirlpool washer?
Whirlpool Duet Washing Machine Error Codes
- Door lock is broken.
- Check door lock switch for foreign objects
- Check wire harness connections to the door lock switch and the main control board at the DLS, DL, and DCS connections.
What does LF mean on the Whirlpool Cabrio washing machine?
Whirlpool Cabrio washer with error code LF. This error means Long Fill (LF). It basically means that if the machine has not filled after 10 minutes then it goes into this error condition. First thing to do is make sure the taps are turned on.
What does it mean when your washer says LF?
too long to fillIf F8 E1 or LF (too long to fill) appears in display, the washer is taking too long to fill. It's possible the drain hose extends more than 4.5" (114 mm) into standpipe. Check plumbing for correct drain hose installation.
How do I fix the LO FL on my Whirlpool washer?
Make sure the drain hose is not kinked or clogged. Straighten the hose for adequate water flow. Remove any blockage from the drainpipe of a utility sink.
What do you do when your washer says Lo FL?
Unplug the washer or disconnect the power for one minute. Plug in the washer or reconnect the power. Re-select the cycle and press Start.
What is LF error code?
2:523:44Quick Fix: LF Code or No water - YouTubeYouTubeStart of suggested clipEnd of suggested clipCode so lf stands for long fill so what that means is it's calling for water.MoreCode so lf stands for long fill so what that means is it's calling for water.
How do I fix the LF on my Whirlpool washer?
LF in the display Check the water inlet hoses to be sure they are not clogged or kinked. You may also need to check the screens on the washer water inlet valve. This means shutting off the water supply, and disconnecting the water inlet hoses from the washer.
What does it mean when a washing machine says E FL?
E:FL - Fill Error - Pressure switch fails to open in 30 minutes in any fill agitate cycle.
How do you reset a Whirlpool washing machine?
Follow these steps to reset your Whirlpool washer:Turn the washing machine off using the control panel.Unplug the washing machine.Wait three minutes.Plug the washer back in, and wait thirty seconds before turning the washer on.
What does lf mean on Whirlpool dryer?
Lint FilterAn LF (Lint Filter) Error Code indicates that the HybridCare™ filter has been removed. Place filter into dryer and make sure the handle is properly seated.
How do you unlock a Whirlpool washing machine?
Push the Start/Stop button to unlock the washer door during the spin cycle. Pause the machine by quickly pressing the Start/Stop button once. After a few seconds, the washer will halt and you'll hear the door unlocking. Add any extra garments into the washing drum at this time, if necessary.
What does lf mean on a Maytag 2000 Series washer?
The LF in the washer code error means “long fill.” It means the washer is taking too long to fill up with water. The main control will shut down if it doesn't get a signal from the water pressure sensor indicating the water is at the proper level.