This mechanics wire, also known as bailing wire or soft wire, is great for handling a wide variety of tasks from binding hay and straw to securing cardboard, textiles or other materials for storage and organization. The rust- and corrosion-resistant mechanics wire is rated for a 40 lb. maximum load capacity.
What is bailing wire used for?
Product Overview. Description. This mechanics wire, also known as bailing wire or soft wire, is great for handling a wide variety of tasks from binding hay and straw to securing cardboard, textiles or other materials for storage and organization.
What type of wire is used in a car?
Not all wire is created equal, in fact, automotive wire gauges and types are quite specific. First rule – never use solid wire for your car. Solid wire is only suitable for houses and industrial use, it should never be use in your car unless you are using to for bailing wire. Automotive wiring has to be flexible.
What are the different uses of safety wire?
Besides locking mechanical parts, safety wire has many other unconventional uses. From making jewelry, securing wire fences to posts, and hanging things for powder coating to name just but a few. The wire provides the ductility, strength, and reliability you need for almost any application.
Why is it called Haywire wire?
It is also known as "haywire," from which the term "go haywire" arose, referring to crazy or mixed up from the wire's use to fix anything in an ad hoc manner. Its closest industrial (proper name) is Mechanic's Wire (Soft Annealed Mechanic's Wire, 18 AWG Industrial Grade).
What is mechanics wire made out of?
For the most part, baling wire is typically made of either iron or steel. They also come galvanized or annealed which you'll read more about below.
What is bale wire used for?
Baling wire is essential in the recycling industry. In short, bale ties are used to secure bales of recyclable material safely and neatly before moving on through the recycling process. There are different types and styles of baling wires used in the industry today.
Why is it called baling wire?
This press was used to secure bundles of hay together. The hay would go into the baling press and would then be ejected out of the back in bales, which then had to be secured by hand with baling wire.
What gauge wire is used for baling hay?
14.5-gauge wireThe machines used to bale hay typically use a 14.5-gauge wire commonly referred to as “farmer wire” or “6500”, which is the amount of feet in a 100# coil of that material.
How strong is bailing wire?
145,000 to 175,000 PSIGalvanized hi-tensile baling wire will have a tensile strength of 145,000 to 175,000 PSI. Tensile Strength: greatest amount of longitudinal stress or force a wire can withstand before breaking. This number is expressed in PSI (pounds per square inch).
What kind of metal is baling wire?
Baling wire is made by stretching or drawing metal until it reaches a specified diameter. There are different types of baling wire made from a variety of materials, including steel, iron, and aluminum.
How was hay bales in the 1800s?
The first hay baling equipment was invented in the late 1800s. These early baling machines were stationary, and the hay had to come to it. Hay was carried by hand to wagons that then took the hay to these early balers, where the machine pressed the hay into square bales.
What is the difference between Bale and bail?
Here are the most common uses of the words: Bale is a large bound stack of material, such as hay or leather; Bail is the security deposit that's paid if someone who's been temporarily released from jail pending a trial doesn't appear in court.
How do you cut baling wire?
Wire Cutters: One tool that you're going to need is a wire cutter in order to grab as well as cut sections of wire. The cutter handles are twisted in order to tie the wires together. Pliers: Aside from wire cutters, another common tool that's used to tighten baling wire are pliers.
How much does a box of baling wire weigh?
Both galvanized wire and black annealed wire are sold in 50-pound (45 per pallet) and 100-pound (36 per pallet) boxes.
When was baling wire invented?
Back in 1879, this invention was revolutionary because it could easily secure bundles of hay together with little to no effort. The hay would be collected from one end and ejected from another. The famers would then use the baling wire to secure bale.
What is the difference between Bale and bail?
Here are the most common uses of the words: Bale is a large bound stack of material, such as hay or leather; Bail is the security deposit that's paid if someone who's been temporarily released from jail pending a trial doesn't appear in court.
Is baling wire galvanized?
The galvanization process allows the baling wire to be used in wet and humid conditions without compromising its structural integrity and quality. Galvanized baling wire has a higher tensile strength with less elongation than black annealed baling wire.
When was baling wire invented?
Back in 1879, this invention was revolutionary because it could easily secure bundles of hay together with little to no effort. The hay would be collected from one end and ejected from another. The famers would then use the baling wire to secure bale.
How do you cut baling wire?
Wire Cutters: One tool that you're going to need is a wire cutter in order to grab as well as cut sections of wire. The cutter handles are twisted in order to tie the wires together. Pliers: Aside from wire cutters, another common tool that's used to tighten baling wire are pliers.
What is wire made of?
What the wire is made of is just as important as the gauge. Copper is always best for any electrical application, but copper is expensive, so there are some alternatives available, including aluminum, copper-clad aluminum. The two main types of wire are OFC (Oxygen Free Copper) and CCA (Copper Clad Aluminum).
What is the main issue with wiring?
Choosing The Right Wire Size. The main issue for wiring is the sizing. Wire is used to carry electrical current, how much current it can carry is directly related to the length and the thickness or gauge of the wire. Signal wires, like from a sensor to the computer do not need to be very big, as the current (amperage) is quite low, ...
How many gauge wires are needed for a 50 amp circuit?
Over 16 feet, with 3% voltage drop, a 50-amp circuit requires 4-gauge power wire. This yields plenty of headroom for the wire to supply up to 80 amps. 90 amps over the same distance would require 2- gauge wire.
What gauge wire is best for a car amplifier?
The more common smaller gauge wires are what you will likely deal with the most. 22 gauge is only good for signal, like sensors. For the next example, you are installing an audio amplifier in your car. The fuses in the amplifier are (2) 30 amp fuses, for a total of 60 amps.
What is the top wire of a syringe?
The top wire is aluminum, the bottom is OFC copper. There is a big difference in performance.
What is the difference between copper and aluminum wire?
The two main types of wire are OFC (Oxygen Free Copper) and CCA (Copper Clad Aluminum). Aluminum conducts about 40 percent less electricity compared to copper. This means your wiring must be larger and will heat up more. Aluminum also has this really nasty habit of corroding.
How many ga wires are needed for a signal?
This is even more important when it comes to signal wires. While these wires are often 18 ga or smaller, the quality of the wire is even more important, any additional resistance in the wire will degrade the signal and your car will suffer.
What is lock wire used for?
The use of lock wire is not limited to airplanes and jets. It is also common in motorsport for securing critical parts such as engine head bolts and brake calipers. You can also lock any other component or accessory that you fear might come loose due to vibration. This includes the oil filter and oil plug.
How does safety wire work?
The working principle of safety wire is quite simple. The lock wire creates counteracting tension on a fastener to keep it from loosening. In other words, a properly configured safety lockwire keeps a fastener from turning either clockwise or counterclockwise. As a result, this keeps the lockwired fastener in the same torque you set it to.
What is safety wire?
A safety wire is a type of stainless steel wire for locking nuts, bolts, and other fasteners to keep them from loosening due to vibration. It is are also called a lock wire or lockwire because of the locking function.
How to put a lock wire through a lock?
Insert the wire end through the lock wire hole and pull it through until you have equal lengths on both sides of the fastener.
Why are safety lock wires important?
Safety lock wires are a crucial safety component especially in applications that produce high levels of vibration. They keep the fasteners intact and always in the torque you set them. This helps to prevent catastrophic mechanical failures. In other words, safety wires help to increase the safety of critical machine systems and equipment, hence the name.
What happens when you twist a safety wire fastener?
If you try to twist a safety wired fastener, you will notice that the twisting action only puts the lock wire in tension. This tension keeps the nut or bolt from turning significantly unless the torque is large enough to snap the wire.
Where to grip lock wire pliers?
Take both wires and grip them in the jaws of the lock wire pliers. Grip where you want the twists to end, which should be right on the lockwire hole of the second fastener.
What is craft wire?
For example, craft wire is thin to support bending, forming, and twisting into jewelry and other craftwork. In the following guide, we provide an overview of what wire gauges are, why they’re important, key considerations, and standard sizes available to help industry professionals select the right wire gauge for their application.
What is gauge wire?
What Are Wire Gauges? The gauge of a wire refers to its thickness. Each gauge is represented by a number, with smaller numbers representing thicker wire gauges and higher numbers signifying thinner wires.
What is AWG wire gauge?
American Wire Gauge (AWG) is a standard method of measuring and identifying cable thickness developed in the United States for electrically conductive wire. It is suitable for specifying gauges for round and solid conductive wires made from non-ferrous material.
How many feet per pound of wire?
Feet per pound refers to the number of feet of wire needed to reach one pound in weight. (e.g., AWG 4 wire requires 7.918 feet, while AWG 40 requires 34.364 feet.) Resistance (ohms per 1000 feet). A wire’s electrical resistance depends on its length and thickness. Longer wires provide greater resistance than shorter wires.
How many amps can a wire handle?
American Wire Gauge standards range from 0000 (which can handle up to 302 amps) to 40 (which can handle up to 0.0137 amps). Most household and commercial wiring demands range from 2 (95 amp maximum) or 3 (85 amp maximum) to 14 (15 amp maximum). In the table below, we outline all of the AWG cable sizes and their unique properties.
Why do electrical wires need to be thicker?
For example, electrical circuits with higher amperage ratings require thicker wires to accommodate the load without experiencing excessive heat buildup. Using wires that are too thin for the specified circuit amperage can result in wire failure or ignition.
How to find the cross sectional area of a round wire?
Area. The cross-sectional area of round wires can be calculated using the formula A= πr2, with r representing half of the diameter. The wire’s cross-sectional area doubles every time it descends three levels (e.g., a six-gauge wire has double the cross-sectional surface area of a nine-gauge wire).
What is soft wire used for?
Farmers used the soft wire for temporary repairs of almost everything you could think of on the farm, from fences, old leather horse harnesses, head stalls and bridles, to pins to keep castellated nuts in place on the tractor.
What is baling wire?
Baling wire, otherwise known as bale wire, farm wire, or soft wire, is a type of wire used in agriculture and industry for everything from mending fences to manually binding rectangular bales of hay, straw, or cut grass. It is also used to band together corrugated cardboard, paper, textiles, ...
What is the meaning of bailing wire?
Etymology. 'Baling wire' is sometimes misspelled as 'bailing wire', but 'bailing' usually refers to a leak or flood, as in bailing out a leaky rowboat with a pail, or bailing out a bank with funds to keep it afloat.
What does "go haywire" mean?
It is also known as "haywire," from which the term "go haywire" arose, referring to crazy or mixed up from the wire's use to fix anything in an ad hoc manner.
How are tiny screwdrivers made?
Even tiny screwdrivers were made by cutting a short length of wire and looping one end for grip. The other end was then flattened and shaped to make a screwdriver for specialized tasks like replacing the tiny screws in reading glasses.