What does code p0600/p0410 mean for my car?
P0600 is a Transmission Code, P0410 is a Air Pump Related Fault. P0600 is a Transmission Code, P0410 is a Air Pump Related Fault. View answers to similar questions from RepairPal's community of auto experts and enthusiasts.
What does the code p0400 mean for Mercedes E320?
The P0400 code is triggered if the intake manifold pressure sensor does not detect a drop of vacuum while the valve function is tested. This can be caused by clogged tubing (but you already cleaned those), a defective valve, or a defective transducer (part of the valve)--meaning the valve is mechanically operative but is not properly activated.
What is code po400?
P0400 code definition. Exhaust Gas Recirculation Flow Malfunction. What the P0400 code means. P0400 is an OBD-II generic code that the engine control module (ECM) detected the engine exhaust gas recirculation (EGR) valve is not flowing recirculated exhaust gases when it is commanded to open the flow of gases into the intake manifold.
What could trigger code p0402?
What could cause the P0402 code:
- Stuck open EGR valve
- Dirty or clogged air filter
- Intake leaks
- Problems with a turbocharger
- Incorrect vacuum hose connection
- Bad or damaged DPFE sensor (Ford, Mazda)
- Faulty EGRC-BPT valve (Nissan)
- Faulty EGR temperature sensor
- Inferior quality aftermarket parts used in previous repairs (e.g. DPFE sensor)
- Damaged or missing EGR valve gasket
How do I fix error code P0400?
0:282:13How to Fix P0400 Engine Code in 3 Minutes [2 DIY Methods / Only $4.11]YouTubeStart of suggested clipEnd of suggested clipFirst carefully remove the egr valve from your car. Turn the egr valve upside down and fill it upMoreFirst carefully remove the egr valve from your car. Turn the egr valve upside down and fill it up with the wd-40. Cleaner let it soak for five hours for the solvent to get rid of all the carbon.
Can you drive with P0400 code?
It really depends on the cause. If the code P0400 is caused by some minor issue like a faulty EGR temperature sensor and the EGR system works properly, there should be no problem driving.
What causes exhaust gas recirculation flow?
One of the most common culprits here has to do with your car's air filter. An overly dirty filter restricts airflow into your engine, often leading to rich fuel conditions. By replacing your air filter, you should not only restore an ideal air-fuel ratio, but also the problems associated with excessive EGR system flow.
How do you fix EGR insufficient flow?
Remove and clean any carbon buildup to the EGR Valve. Remove and clean any carbon buildup to the EGR temperature sensor. Removing carbon buildup/ partial blockages out of EGR tubes to the intake manifold. Replace defective EGR temperature sensor.
How do you clean an EGR valve?
1:533:26Cool Trick to Clean EGR Valve in Your Car (Low Flow Code P0401)YouTubeStart of suggested clipEnd of suggested clipAnd before I put the EGR valve there's another trick get some wd-40 spray it in the hole. I'll letMoreAnd before I put the EGR valve there's another trick get some wd-40 spray it in the hole. I'll let it soak for about half an hour the penetrating oil will get on the stem.
Where is the EGR valve located?
Answer: The purpose of the EGR valve is to recirculating engine exhaust gas to the back to the engine cylinders. To accomplish this task the EGR valve is attached to the intake manifold of the engine. This location is atop of the engine near the carburetor, usually towards the back of the engine near the firewall.
What damage can a faulty EGR valve cause?
A faulty EGR valve can cause problems with the flow and operation of the EGR system leading to performance issues including a reduction in power, reduced acceleration and decreased fuel efficiency. It can also cause vehicle emissions to increase.
Which of these engine concerns may be caused by a stuck open exhaust gas recirculation EGR valve?
Check engine light: as with most engine management components, a problem with the EGR valve may trigger the check engine light. Engine performance issues: if the valve is stuck open the vehicle's air-fuel ratio will be disrupted causing engine performance issues such as reduced power, poor acceleration and rough idle.
How long does it take to change an EGR valve?
Usually the replacement of the EGR valve is completed after 1 hour. For some older models, half an hour is sometimes sufficient. For tighter built models, the replacement can take 2-3 hours.
How much does it cost to fix EGR valve?
The average cost of replacing the EGR valve in your vehicle is anywhere from $250 to $350 on average, depending on your vehicle's year, make, and model as well as the type of system it has. The cost of parts will be somewhere around $190 to $270, while the cost of labor will be anywhere from $60 to $80.
Should I clean or replace EGR valve?
The exhaust fumes are definitely beneficial but they can clog the valve once they accumulate over time. This can cause clogs on the valve and a host of other engine problems. Experts agree that the valve must be cleaned every few years.
Where do you spray EGR cleaner?
Spray the product for 2 seconds into the air intake manifold but DO NOT SPRAY DIRECTLY INTO THE INTERCOOLER. After each spray, wait until the idle rpm is restored and engine runs stable. Repeat the process until all of the product has been discharged from the aerosol.
What does exhaust gas recirculation flow insufficient detected mean?
Diagnostic trouble code (DTC) P0401 stands for “Exhaust Gas Recirculation (EGR) Flow Insufficient Detected.” This code means that the computer detects insufficient exhaust gas recirculation (EGR) flow in the system.
What does the EGR temperature sensor do?
The EGR temperature sensor is an engine management sensor that is part of the EGR system. It works together with the EGR solenoid to control the flow of the EGR system. The sensor is installed in between the exhaust and intake manifold, and monitors the temperature of the exhaust gases.
What does the EGR valve position sensor do?
The EGR Position sensor detects the movement and position of the EGR valve pintle. The EGR Pressure sensor detects exhaust gas flow through the EGR passage.
Where do you spray EGR cleaner?
Spray the product for 2 seconds into the air intake manifold but DO NOT SPRAY DIRECTLY INTO THE INTERCOOLER. After each spray, wait until the idle rpm is restored and engine runs stable. Repeat the process until all of the product has been discharged from the aerosol.
What is the OBD code for exhaust gas recirculation?
If your OBD-II scanner registered code P0400, that indicates a potential problem with your vehicle’s exhaust gas recirculation (EGR) system. Learn how to address it by learning about its meaning, causes, symptoms, ...
What is the heart of an EGR system?
The heart of the EGR system is the EGR valve, which redirects a portion of the exhaust gas into the engine intake manifold to be integrated into the air/fuel mixture. This reduces cylinder temperature and the amount of nitrogen oxide (NOx). If it malfunctions, your car may fail an emission test.
What does code P0400 mean?
This means that the system is not recirculating exhaust gas under conditions that require EGR. Some vehicle models are more prone to code P0400 than others.
What is the code for a Nissan Frontier?
Some vehicle models are more prone to code P0400 than others. Have a technician check your vehicle immediately if you own a Nissan (especially Nissan Frontier), Mercedes Benz, Ford, Opel, or Subaru and your diagnostics show P0400 .
How to fix P0400?
To fix the P0400 code, you must identify and resolve its exact cause. You also need to make sure that the solution you implement is applicable to your vehicle’s make and model. If you are uncertain of your automotive know-how and DIY skills, letting your trusted mechanic handle the job may be your best option.
P0400 – Exhaust gas recirculation (EGR) system -flow malfunction
OBD II fault code P0400 is defined as “ Exhaust Gas Recirculation Flow Malfunction”, and is set when the PCM (Powertrain Control Module) detects a problem with the amount of exhaust gas being rerouted to the inlet tract. Such a problem will cause a trouble code to be stored, and a warning light to be illuminated.
Step 1
Record all fault codes present, as well as all available freeze frame data. This information can be of use should an intermittent fault be diagnosed later on.
Step 2
Inspect all associated vacuum lines for signs of damage or visible leaks. Bear in mind that not all leaks are visible, so if the vacuum lines are hard to the touch, it is more than likely that air is leaking past the joint or connection. Replace all vacuum lines as required.
Step 3
On some applications, the vacuum to the EGR valve is controlled by an electric control solenoid. Where this is the case, inspect all associated wiring for damage; look for shorted, burnt, broken, or corroded wiring and connectors. Repair all defects as required.
Step 4
If all wiring and vacuum lines check out OK, remove the vacuum line from the EGR valve and plug the open end. Attach a hand-held vacuum pump to the EGR valve and start the engine. Provided that there are no other codes and faults present that could influence the idle quality, the engine should idle smoothly.
Step 5
If an applied vacuum produces an effect on idling, suspect a defective vacuum control solenoid. If the solenoid is electrically operated, perform continuity, resistance, ground, and reference voltage checks on all associated wiring, as well as the solenoid itself.
Step 6
Clear all codes after repairs had been made, and retest the EGR system to see if the code returns. Bear in mind that several drive cycles may be required without the code reappearing before the repair can be considered as having been successful.
Monitor A: (spec rules, not with my comments see tables below for my comentary)
The engine must start and run well. The monitor waits for 240seconds before starting.
Monitor B
Same basic rules as above, but a start delay of 290 seconds ( takes second fiddle, huh)
What Does That Mean?
- This diagnostic trouble code (DTC) is a generic powertrain code, which means that it applies to OBD-II equipped vehicles. Although generic, the specific repair steps may vary depending on make/model. The exhaust gas recirculation (EGR) valve is vacuum controlled valve that regulatesthe amount of exhaust gases that re-enter the cylinders. The powertrain controlmodul…
Symptoms
- No symptoms will likely be noticed by the driver other than the MIL (malfunctionindicator lamp). However, non visible symptoms will be increased combustiontemperature and increased Nox emissions.
Causes
- A code P0400 may mean that one or more of the following has happened: 1. Plugged EGR passage which restricts the flow of exhaust gasses 2. Faulty EGR solenoid 3. Faulty EGR solenoid wiring/harness 4. Vacuum lines damaged/disconnected to the EGR valve solenoid or to the EGRvalve 5. Faulty EGR valve
Possible Solutions
- Since EGR valve designs are different, no one test will suffice: 1. Using a scan tool, operate the EGR valve with the engine running. If theengine stumbles, the problem was likely intermittent wiring problem or intermittentblockage problem 2. If engine doesn't stumble, operate the EGR valve manually, if possible.If engine doesn't stumble and die, the ports are likely plugged. Remov…
Related DTC Discussions
- 97 mazda protege....P1195 and P0400 This is on a 97 Mazda Protege SE, 5sp, 1.5L.I have 2 codes, P1195 and P0400. I have had the P0400 for a little while (it comes and goes for some reason), but jus...
- 1996 Subaru OBII codes P0130, P0400 and P0740 I own a 1996 Subaru Legacy Outback with a 2.5L, auto with 164k miles. It has an extremely hard shift from 1st to 2nd gear and keeps dow…
- 97 mazda protege....P1195 and P0400 This is on a 97 Mazda Protege SE, 5sp, 1.5L.I have 2 codes, P1195 and P0400. I have had the P0400 for a little while (it comes and goes for some reason), but jus...
- 1996 Subaru OBII codes P0130, P0400 and P0740 I own a 1996 Subaru Legacy Outback with a 2.5L, auto with 164k miles. It has an extremely hard shift from 1st to 2nd gear and keeps down a gear at high...
- P0420, P0400 and P0303 on 1999 Mistubishi Gallant ES The Mitsubishi Gallant ES has 262,000 miles on it. Been getting the P0420 catalyst efficiency below threshold for about a year, year and a half....
- 1999 Mazda 626 V-6 Missfire, codes:P0400, P1131, P0174 My 1999 626 V-6 runs very rough…
Need More Help with A P0400 Code?
- If you still need help regarding the P0400 trouble code, please postyour question in our FREE car repair forums. NOTE: This information is presented for information purposes only.It is not intended as repair advice and we are not responsible for any actionsyou take on any vehicle. All information on this site is copyright protected.