...
Comparing Seachem Phosphate Removers.
| Product | PO4 bound |
|---|---|
| PhosNet (GFO) | 1.41 mg/g |
How does phosguard™ work?
PhosGuard™ rapidly removes phosphate and silicate from marine and freshwater aquaria. Although PhosGuard™ is effective in both fresh and marine water, it will operate better in sea water and the need for it is better defined in sea water. It is not recommended for phosphate buffered freshwater (PhosGuard™ would remove the buffer until saturated).
What is phosgard made of?
Phosgard has a preventative action and a curative action if sufficient root system remains. Contains: 400g/L phosphorous acid, present as the mono and di potassium salts, in the form of a soluble concentrate
Can phosguard be used as a phosphate buffer in freshwater?
It is not recommended for phosphate buffered freshwater (PhosGuard™ would remove the buffer until saturated). PhosGuard™ is highly porous and bead-shaped to promote easy water flow through and around it, thereby increasing both its efficiency and capacity.
Is phosgaurd a Band-Aid?
Phosguard, phosban, gfo, ect is a band-aid. Find the source of the nutrients that are feeding the algae. Cut back on feedings and the light cycle. Do large water changes often and the nutrients will come down depending on how much your rocks have soaked up. I totally disagree with PhosGaurd being "a band-aid".
How much phosphate will PhosGuard remove?
about 40,000 mgEach liter of PhosGuard™ has a theoretical capacity of removing about 40,000 mg of phosphate or about 100 mg/L phosphate in 100 gallons.
How effective is PhosGuard?
4.0 out of 5 stars PhosGuard works. PhosGuard works to decrease phosphate, moderately. It isn't as aggressive as GFO (granular ferric oxide, various brands), and consequently isn't as likely to drive your phosphate to zero and shock your corals.
Can you use too much PhosGuard?
It is entirely possible to overdose activated phosphate absorption medias in the aquarium, and PhosGuard™ is no exception. If phosphate-absorbing medias are overused, they can lower the phosphate so suddenly that sensitive aquatic organisms like corals and invertebrates can become stressed.
What is seachem PhosGuard used for?
PhosGuard is a high capacity and high efficiency filtration product, made by Seachem. It is designed for the removal of both phosphates and silicates from marine or fresh water aquaria. Silicates causes an unsightly brown and tan appearance on surfaces in the aquarium, especially rocks, sand and the glass.
How long can you use PhosGuard?
PhosGuard™ needs to be replaced every 4 days as long as there is a phosphate problem because, given an infinite amount of available phosphate, PhosGuard™ absorbs phosphate so quickly that it reaches its full capacity in 4 days.
Does PhosGuard get rid of brown algae?
0:413:55Seachem Phosguard | How To Get Rid Of Brown Algae - YouTubeYouTubeStart of suggested clipEnd of suggested clipSee is I see um see okay let's get into the video that times are LG with distinctive transparentMoreSee is I see um see okay let's get into the video that times are LG with distinctive transparent cell walls that are made up of silicon dioxide there are an estimated twenty thousand to two million
Does PhosGuard affect PH?
PhosGuard™ is not capable of impacting the mineral concentration in any way, so it will not directly impact the GH of the aquarium.
Where do you put the PhosGuard?
0:351:36Remove Phosphate with PhosGuard (without media reactor) - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then you'll put it in the area of the sump. With high flow. So you could take Foss. Card put itMoreAnd then you'll put it in the area of the sump. With high flow. So you could take Foss. Card put it in this mesh bag. And put that in your filter sock or the drain water falls through it if you have a
Is PhosGuard safe for fish?
PhosGuard™ absorbs phosphate, and while fish are more-or-less ambivalent about phosphate levels, plants and corals are not. Corals require phosphate levels below 0.2 mg/L in order to be healthy, while plants require phosphate levels between about 0.25-1 mg/l in order to live and grow.
Does PhosGuard remove medication?
PhosGuard™ can be used alongside most supplements and types of filtration media, but is capable of removing medication from the water.
How do I remove silicates from my freshwater aquarium?
Take a water pipe with a hose and pour the water on the corals and other plants inside your aquarium. The silica will wash away and get collected in the filter. If you think that the silica isn't going away from just water, then you use a cloth to gently wipe it off from the surface of your aquarium plants.
How do you bring phosphates down in a marine tank?
The easiest and most common way to control phosphate is with granular ferric oxide, a phosphate removal resin, and the most common one of those is Rowaphos. This black/brown substance comes with a net bag, and you put it in the bag, then somewhere in your reef tank, in an area of high flow.
Does PhosGuard lower PH?
PhosGuard™ is not capable of impacting the mineral concentration in any way, so it will not directly impact the GH of the aquarium.
Where do you put PhosGuard?
Directions:For best results, PhosGuard™ should be placed so as to maximize the flow of water through it. It may be used in a canister filter, box filter, or any high flow area of a trickle filter. In some situations it may be necessary to use in a filter bag. Use 250 mL (~1 cup) for every 300 L (75 gallons*).
How do you use aquarium PhosGuard?
0:071:36Remove Phosphate with PhosGuard (without media reactor) - YouTubeYouTubeStart of suggested clipEnd of suggested clipCard put it in this mesh bag. And put that in your filter sock or the drain water falls through itMoreCard put it in this mesh bag. And put that in your filter sock or the drain water falls through it if you have a nano cube. You can these come in different sizes.
Is PhosGuard safe for fish?
PhosGuard™ absorbs phosphate, and while fish are more-or-less ambivalent about phosphate levels, plants and corals are not. Corals require phosphate levels below 0.2 mg/L in order to be healthy, while plants require phosphate levels between about 0.25-1 mg/l in order to live and grow.